You are not limited to using only Neckog materials for either device. Simply provide us with the name of the material you wish to use, and we will send you a calibrated flow file for it. You have the freedom to design the molds and manufacture them from any material(silicone, aluminium) of your choice. DaaS is designed for those who prefer not to handle the process themselves, and with prices starting at just $4.99 per mold, it's an incredibly affordable option.

The audio killed my ears

@AlitaGunm99

20 күн бұрын

I can't understand a word, and the CC's aren't working. I guess the AI couldn't understand him either.

@NeckogIndustries

19 күн бұрын

We fixed the subtitles. Audio will be fixed on the next one.

This is really cool. Definitely want to see more, especially start to finish

@NeckogIndustries

22 күн бұрын

Definitely we will be sharing a lot on this channel.

@willofthemaker

22 күн бұрын

@@NeckogIndustries looking forward to it. Subbed

what is the difference from just buying a 2 part epoxy and casting it in a 3d printed mold?

@davidconner-shover51

22 күн бұрын

less mess I figure

@Slurgical_3D_Terrain_Channel

19 күн бұрын

Hopefully hassle free bubble free end product…not very clear whats going on.

@mayamanign

19 күн бұрын

Wait, I thought this was abs/ASA injector. Resin?

@RaphMNTR

19 күн бұрын

My thoughts exactly. It seems to have a pressurized injection system, but in reality mold design itself is the most important factor. To my understanding this product is really niche for people doing 10-50 Part runs. FDM printed molds dont really last much longer than that, and for lower part count i can just mix the resin by hand and pour it.

@Slurgical_3D_Terrain_Channel

18 күн бұрын

@@RaphMNTR I agree, I have my doubts for viability. The 3D printer they are showing and printed results have layer lines that really shows at a distance on camera. The quality of prints or how reliable the printer is questionable given how performing the last generation of printers are. I’m guessing the printer has both process in the one box (system on the side) Didn’t watch all their videos. There are some good DYI injection kits that can be build and reuse old 3D printer parts instead of sending those old printers to the graveyard. I have my reservation on the release mold getting rid of the printer’s layer lines without going to great effort.

This is awesome. With the wire edm, the desktop sla printer and now this I am loving how fast the advancements in 3d printing has been this year! So many really cool things showing up cant wait to see more of this I am especially excited about the foam aspects for rc planes. Are the molds able to be made with a hollow center?

@DOGMA1138

21 күн бұрын

This isn't 3D printing, this is just your regular polyurethane resin casting, you can 3D print or CNC the molds yourself and buy the poly resins in bulk at cheaper prices already. So far I haven't seen anything here that is new or an improvement over existing workflows.

As an engineer I would have to say this would be a tough product to deliver. How do you handle cutting excess material?

@JAYTHEGREAT355

16 күн бұрын

I second that . I would like for them show us the machine working . Also if it clogs, that'd a big issue.

Hopefully they find the time to answer the many questions.

I need to know more about yours materials , the "rigid resin" for example is like ABS? ASA? Nylon?

@NeckogIndustries

20 күн бұрын

Rigid is very close to ABS. There has been a lot of comments about this we will take all into consideration on the following videos.

@PanayotovOne

20 күн бұрын

Think about PC like resin.

That printer is absolutely colossal. And I thought my X-Max 3 was big

very cool! would love something like this for making flexible toys

@Rubysh88

22 күн бұрын

like, made with silicone amiright 😏

@acolyte8564

21 күн бұрын

Why? 😄

@HellaDesigns

21 күн бұрын

@@acolyte8564 would save a bunch of time by auto mixing all the materials and dispensing without having to clean or throw away tons of containers etc

Things that are missing, that were just glossed over: Just send you the part to design the mold? 1.) How much does this design process cost? 2.)Can we design our own mold and how? 3.) If we have to go through your company to design the mold, is shipping included? 4.) What are the consumer facing material properties for each of the resins; for example is there a UV resistant one similar to ASA, is there a impact resistant one similar to ABS/ASA, is there a food safe one similar to PETG/PLA(when made correctly). Is there a high strength one similar to PLA and PC, is there a high temp one similar to ABS/ASA/PC?

@NeckogIndustries

22 күн бұрын

Thank you for the questions. These shape the future videos. 1. Design is going to be per mold based starting from $4.99. 2. You can certainly design your mold. We will be sharing a lot on how to design for different materials and different applications on this channel. It will start with 2 part molds and at the first video 3. We don't offer manufacturing of the molds. Its just a service we provide so that people can streamline their process. 4. There will be UV resistant resins we offer, our rigid material is fairly similar to injection molded ABS. 3D printed parts aren't isotropic although the numbers on papers are high. In real world use thats not the case because of the layered structure of 3D printing. There will be no food safe material on polyurethane line-up. If we can get our system to use platinum cure silicones or special resins but before that there are a lot of materials to offer. Like earlier its generally much durable than 3d printed alternatives we will release data sheets on every material. Yes there will be polyurethanes for higher temperatures currently Glass transition of Base Rigid is 167 F or 75 C.

Im intrigued. This mimics a lot of my workflow. I just dont really understand it yet. So its a FDM printer alright. Plus a mixing and injection system for thermoset resins. But how does this workflow actually benefit me? As far as explained, i still have to manually prep the mold surfaces, and manually inject the resin. Other than a static mixer being integrated, i dont see the benefit yet. Could you do a more indepth video of the actual casting workflow?

Hi nice product, i'd like to use this machine to overmold some rubber parts over CF plates, the mixing ratio is not exactly 1:1, but more likely 60:40, would it be possible to tune in a different mixing ratio?

@NeckogIndustries

20 күн бұрын

Depends on the viscosity profile of the resin but its possible. Calibrating to different resins is something we will be doing. It's not going to be just our resins.

Please show a full demonstration of the process

Would like a better idea of cost to run - like cost of consumables, and the range of costs for the injection materials (I can't imagine $12/kg is across the board) as well as cost for the mold release. Also if there are going to be geographic related issues on where the resins can be shipped, shipping costs... all adds up really quick.

@NeckogIndustries

21 күн бұрын

Mentioning all prices would make for a boring video. Mold release is $20 per 5 ounces(approximately:150gr). It equates to about 8 cans of mold release spray. You can use both systems with the resins that are available in the market . Only thing is provide us with the name so that we can update the device. We are working to streamline the process of reaction injection molding and casting to make it hassle-free.

@maficstudios

20 күн бұрын

@@NeckogIndustries To be fair, one can cover such things with a chart. The question I have is if your business model is equitable, or it's a standard "printer" model where the device is free, and the gotcha is in the consumables. That I have a market that tolerates a given cost, and if I can't mold my parts within that cost, then buying the device is moot. Your product looks good on the surface, just want to do my due diligence.

Im interested in injection molding silicone parts. Food grade and nonfood grade. This is possible on the flovv? Do we have to use the exact materials your company provides? And just to confirm again, are the molds required to be aluminum or stainless steel?

@NeckogIndustries

20 күн бұрын

This one has been asked over the emails too. Right now not possible but we are working on it. You can use readily available resins. Before doing so we just ask to give us the name so that we can update our material profile. Different resins have different viscosity profiles. Mold can be anything you readily use. We did develop a mold release to use directly 3d printed molds from ABS,PLA or Resin printed molds. Also for aluminium or silicone you can use off the shelf mold releases too.

@potatofries144

20 күн бұрын

@@NeckogIndustries Gotcha. Thank you for the reply

Im not clear on what each box does. Is one an FDM printer? The smaller one is an injection machine, sort of a press that holds the mold shut withbpressure and then i jects the part? We need a demo of a regid part and a flexible part. Show us the lapsed time, the prep and process and post processing.

@NeckogIndustries

21 күн бұрын

Next video will be from start to finish whole process. Big one is 2in1 FDM printer with a injection system. Smaller one is only Injection System. Molds are either clamped or screwed together. Seamlines are taped.

@rescuemethod

20 күн бұрын

@@NeckogIndustries great looking forward to that video.

@MyMomHadMe

20 күн бұрын

Same

@poulniehorster7373

20 күн бұрын

Please ensure much, much better sound than on this video

I know fdm. I don't yet understand this system. Please do a process from start to end of some functional usefull part.

@NeckogIndustries

22 күн бұрын

Give us an idea....We will be sharing videos on start to finish including the mold design process on this channel.

@tomyocom5886

22 күн бұрын

@@NeckogIndustries 3 Ideas. High detailed and small ( D&D miniatures) 2. Under a hood, or in a car parts, something that can sit on a dash would say a lot. 3. Switch colors FAST on the same mold... These 3 things will Sell many of these systems if you can WOW us. 4. Would be how many can you do of a thing.

@dustinhanlin

21 күн бұрын

​@@NeckogIndustriessome other good examples would be a wearable helmet from a firm foam, a small flyable glider from lightweight foam, or something small and intricate like a tabletop dice set from resin.

@airborne0x0

13 күн бұрын

@@NeckogIndustries How about a two piece electronics enclosure?

like to se miniature and comlex stateu molds injected

Looks cool but I can’t understand what the person is saying

@DavidSchnegg

19 күн бұрын

Just change the playback speed to 0.75x... 👍

How much will the mold release cost?

@NeckogIndustries

15 күн бұрын

The one in the video is 5oz $20. It equates to 6-8 cans of spray mold release.

@MaximalistWorkshop

15 күн бұрын

@@NeckogIndustries Great - thank you!

Do you have material safety data sheets for the chemicals?

@NeckogIndustries

22 күн бұрын

These will be available on our website.

I’m a maker, I make terrain for tabletop gaming. I don’t really understand everything you are selling. What is the $499 for unless I missed something in the video. I see 2 machines on the desk. How many times can the same mold be used before it deteriorates. How hot is the chemical process. The release mold “helps” with layer line…then how accurate can it be for small details. I can easily see this working for parts and jigs for trades, that is actually brilliant for that market. But how doesn’t affect really thin or small details. If I could produce basic terrain with this setup it’s a win for me. My printer can deal with the small details while larger structures be casted.

@NeckogIndustries

19 күн бұрын

Flovv which is the standalone unit will be $499. If its an ABS mold you can use it 40-50 times without any problems. Temperature depends on the thickness of the part(it doesn't go above 180-190F for a very thick part). For really small parts SLA printing or using silicone molds is way to go. When removing a very small detail from a rigid mold its likely to break unless its from a flexible material(in this case using a off the shelf spray mold release is much better). We never meant it to build very small details as there are a lot of machines for that. But if you are regularly casting this helps a lot with the process also for casting large structures from multiple part molds, its cheaper while also being very easy to use. If user is already casting things manually, Flovv makes it much easier. Thank you for the comments we are trying our best.

@KidHaru

14 күн бұрын

Just look up smooth on products. Buy some oil based clay. Foam core board. And hot glue. Save yourself hundreds of dollars and hours of time. "block mold" "2 part mold" "cavity/matrix mold" are all the tutorials you'll need.

Where will these be made?

@NeckogIndustries

21 күн бұрын

We are based in Texas. We are manufacturing all chemicals and devices in US. Screen and some of the components are bought from China.

@rescuemethod

20 күн бұрын

@NeckogIndustries great. Sounds like the printer will be made in the USA with less than 50% Chinese components. Great you are making it in the US.

@PanayotovOne

20 күн бұрын

How expensive would it be to buy the consumables from The US? Are you going to have a reseller in the EU?

I like to see a working machine

@NeckogIndustries

21 күн бұрын

Next video will be a complete workflow

I like the potential but the deposit prior to the kickstarter is BS. If you have backers on that platform, why should you have to back the project AND your position to back the project?

@NeckogIndustries

21 күн бұрын

To see the manufacturing numbers roughly before the kickstarter.

Can the printer injection mould you a better quality microphone? 🙄

Watched the whole video but still have no idea how the mold is made. You would think for a cheap injection system, you would also want to emphasize how easy it is to make a mold. I am going to assume the mold is a printed part

@NeckogIndustries

19 күн бұрын

Yes mold is a 3D printed part. Mold making starts from designing a mold then printing it. Printing it is easy design on the other hand is not easy for everyone as we say in the video too.

So now you can make 3d injection miniature

@NeckogIndustries

19 күн бұрын

If its a silicone mold yes. Small details from a rigid mold would break easily unless its injected from a flexible material.

Actual ASTM physical parameter testing results of your 'special' resins would be helpful - unless there is a reason you don;t want people to see actual data. Also - how is this different than just printing a 3D mold in any old printer and using whatever 2-part epoxy you wish? Why use your 'special' system?

@NeckogIndustries

20 күн бұрын

RIM machines has always been industrial size. This is for the one thats for makers. We use polyurethane resins. ASTM makes sense we will include this in the future videos. It creates better parts with a much smoother workflow.

So this takes traditional silicone molding to the next level?

Isn’t this just a 3d printer? You can make a mold with certain plastics that you can use as mold

@NeckogIndustries

19 күн бұрын

Flovv-e is a 3D printer with Injection System. Flovv is Standalone Injection System. You can print molds from ABS. Also You can use molds made out of silicone, aluminium materials.

I think the example parts say it all… You have to think, they are showing us the best they can do. The services side is a huge no go for me… I own an engineering firm, we design injection molds, machine them, and then use them in our shop, and these people are telling me that the skills required to design a resin mold are too much for my team? LOL. Who are these people? Also, I’ve 3D printed plenty of resin molds in the past and used off the shelf resins with no issue, so what do I gain here? I don’t get it… Seems like this is a, not very well thought out scam…

@raphofthehills4405

21 күн бұрын

He did not say that one must use their daas mold-design service. Users can design and print their own mold. Seeing your background it is doubtful you are their customer target. But for people new to injection molding, this supposedly affordable and simple to use / clean solution might be an interesting start.

@MrGTAmodsgerman

21 күн бұрын

Your team? This is for average consumers. Not you

@bob84409

21 күн бұрын

I think target market are hobbyists, not people who own teams. That should be pretty self evident from the cost.

@DaveEtchells

21 күн бұрын

AFAICT, the design service is just an option; you’re free to do your own designs. (In fact, you can just use your own printer with their standalone injection machine, I didn’t hear any limitation about design in his presentation.

@SteffenBauer

21 күн бұрын

@@bob84409 i dont think hobbyists are the target. Hobbyists can just cast pour the materials normally or use a syringe. My guess it is for etsy shops or small shops like for prototyping, small batch productions or prop making for theaters and movies.

What is the price per KG for your materials? Your website shows 0.00 for all materials.

@tomyocom5886

22 күн бұрын

In the video $12 kilogram

@sirrodneyffing1

22 күн бұрын

Smooth On and many others sell 2 part resins by the bucket load.

Too many typos to be taken seriously ...

I have no idea what you are saying here. You are displaying two machines, then telling us it is $499. Am I buying machines, or a service? Very confusing...

@henrik.norberg

20 күн бұрын

I was thinking that as well, but go to the link in the information and it explains it as it should have been done in the video. TLDR $499 is for the standalone injection machine to the right. The complete system to the left is almost $4000 msrp.

My ears are bleeding

Can we stop making more plastic

I see so many hidden costs in this system its not even funny! When anyone says something is or uses "proprietary" parts or materials be skeptical because the costs they claim are just hiding the real cost!

@NeckogIndustries

19 күн бұрын

You can use your resins and your mold releases. Our mold release is $20 which is cheaper than almost all.

its only a concept. the flow-e behind the printbed that 2 cable is a LOL . im not convince thats a working printer. the whole thing looks like a 3d printed can see the layered

@NeckogIndustries

21 күн бұрын

Outer shells are made out of thermoformed ABS with flat panels being aluminium. Internal structure is L stainless steel riveted to aluminium bent panels. Yes there are 3D printed parts.

@SuperLittlehorn

21 күн бұрын

@@NeckogIndustries are The Machine a working or just a prototype?

@NeckogIndustries

21 күн бұрын

@@SuperLittlehorn All the cut scenes are actually injected with the machines. instagram.com/p/C4g47kptGtt/ On the link this is at the highest flow setting with the rigid resin.(Since operator is behind the mold he can't see the mold fill. So, when injecting, the operator presses the button multiple times instead of holding it down continuously.).Also on the next video we will do the process from start to finish without cut scenes. After the injection we will do a timelapse without the cut. Also there will be a printing timelapse on the scene. So they are working.

Looks / Feels/ Sounds like Scam. NT

NATO- No Action, Talking Only.

Geez Reup this with decent video, then I'll listen.

How long does it take to run each part? I’d like to see the process of assembling the mold, using the machine to inject, removing the part from the mold, and then on to the next part. I understand this isn’t for large production runs, but say I’ve got 20 parts to make like those on your table-what’s the time and effort involved?

@NeckogIndustries

21 күн бұрын

Sure. On the next video we show from mold design to finished product.