48 to 56 Crank Replacement Comparison

Ойын-сауық

Like most eBikes you will experience Ghost Pedaling the standard fix is to change out the rear cassette . In this episode we take a look at the LitePro 56 tooth Crank Set changing out the 48 tooth stock crank set. Will it eliminate Ghost Pedaing?

Пікірлер: 5

  • @johnw65
    @johnw655 ай бұрын

    Thanks Dale! The stock cassettes are usually 7 speeds from 14 to 28 tooth. The 7 speed upgrade 11 to 36 tooth not only pedals faster but also provides much lower '1st gear' for pedaling a dead ebike... Now, for ghost, or what I call air pedaling, I run out of the desire to pedal at all past 16 or 18 mph with std 48T crank sprocket and 14 tooth rear high gear. but note... 48C/14S=3.43 Wrpm/Crpm - 48C/11S=4.34Wrpm/Crpm - 56C/14S=4.0 Wrpm/Crpm.... But, 56C/11S=5.09Wrpm/Crpm Where C is Crank teeth. S is spindle teeth. W is wheel... So spindle change is faster than just crank change! But, changing both is fastest

  • @johnw65

    @johnw65

    5 ай бұрын

    Now, stock 48T crank to 36T spindle is 1.3Wrpm/Crpm... Easiest granny gear for pedaling dead bike... 56T crank and stock 28T spindle is 2.0Wrpm/Crpm... Almost twice as high as the stock crank and spindle change

  • @brucecain3757
    @brucecain37575 ай бұрын

    Ok. What is “ghost peddling “?

  • @DaleMrDSimmons

    @DaleMrDSimmons

    5 ай бұрын

    It’s where your pedaling speed exceeds the PAS setting your in. Your pedaling is accomplishing nothing, thus Ghost pedaling.

  • @johnw65

    @johnw65

    5 ай бұрын

    Bike going faster than you can pedal... On 20" bikes w/14-28T spinner and 48T crank it's about 18mph...

Келесі