So great !!!! It’s fun watching you figure it out .

@larryluna36

2 ай бұрын

Thanks for watching!!

Hell yeah homie big difference now shit is bad ass

@larryluna36

3 ай бұрын

Thank you man I appreciate the support. I have bigger plans for it still.

these big blocks are awesome, just hard to gear it for starting on hills and slow street riding as you are limited with the 14 tooth clutch

@larryluna36

3 ай бұрын

Yes the only thing you can do is change the rear sprocket

If you can tig weld or know someone that can, I’d suggest you make a custom gas tank that runs along the entire length of the underside of your top tube. Just a thought.

@larryluna36

3 ай бұрын

I actually wanted to do that and get a 1 Gallon cylinder tank but someone I know stopped making them for a while.

Sick dude. Can you do a video on how to tune properly 🙏🏼

@larryluna36

Ай бұрын

Of course I will take my time to explain that and do a video on that very soon.

🔥🔥🔥🔥🔥🔥

Going that fast you need to get a steering stabilizer because if the bars move one way too much while you’re tucked down it will just throw you off. I had it happen to me on a different bike with taller bars where my hands were right in front of me and up some more.

@larryluna36

3 ай бұрын

Thank you for that information. I didn’t know I needed one but I will look into it.

try a polini dream bike 12,5 hp it will lift the front end even at 30mph have to hold it on the back brakes. cute build though

@larryluna36

3 ай бұрын

I’ve heard of those engines 😂 I’ve never actually ridden one but I heard they’re very wheelie happy

74.1 MPH = 119.3 KPH Safe riding brother, be careful and maybe wear more layers because even that footpath is able to turn you into human mincemeat and I'm sure you know that. You don't regret riding naked until it's too late.

@larryluna36

3 ай бұрын

Thank you and that is very true. I appreciate it

Clean bike

@larryluna36

3 ай бұрын

Thank you man I appreciate the support!!

That things a death wish😂 love it

@larryluna36

3 ай бұрын

It really is now and I have more plans for it still😂

Wow 😮

@larryluna36

Ай бұрын

It is a Very fast bike 😂

Yo man what clutch are your using and what do you recommend torque converter or clutch I'ma be doing a 301 build but I might wanna run a clutch you let me know

@larryluna36

Ай бұрын

I’m running a regular $25 clutch from Amazon. I cut the springs shorter from it so it won’t burn the clutch at idle or low rpm but it ran great and had no issues. Right now I’m in the process of making it run with a 40 series torque converter but I will make a video on it once it’s running.

I have other question sir I appreciate ur help in regards to drilling out the dial pen area. I was wondering if you could explain that just a bit more or if by any chance you may have a picture ? Of how u did this in odder to fit everything properly also it’s ok to remove the electric starter and just have that hole open exposed as well ? Thank u sir.

@larryluna36

2 ай бұрын

Yes i removed the whole starter assembly and I now have the hole exposed. It will be safe to run as far as I know as long as nothing gets caught in there because the flywheel is exposed a little. I can actually show you exactly how I drilled out the area where the dial pen goes. I will have a video up soon but I’ll upload a KZread shorts about it since I’m trying out a new torque converter for it to see the difference and I can show you exactly what I did to make it fit.

@nutsnbolts4601

2 ай бұрын

@@larryluna36 brother u are the man thank u sir helping me out me that I rather be safe then sorry and I got everything loking really good at this point just last thing to do is the drilling for the clutch in the shaft to fit as you did I’m super excited and thank u again for the awsome ideas u came up wirh to make it work.

@larryluna36

2 ай бұрын

@@nutsnbolts4601 No problem man!! Thanks for watching and supporting the channel

@larryluna36

2 ай бұрын

Check out my new video i just posted. I explained how I drilled out the dial pen area more and showed exactly how I did it. kzread.info/dash/bejne/opV1z5iamsibXbg.htmlfeature=shared

🎉🎉❤

@larryluna36

3 ай бұрын

Thank you for the support!!

hi back again im having trouble finding the right wheels i was thinking of buying citta girela wheels but i dont know

@larryluna36

2 ай бұрын

I’m running a 5 inch tri-star rim with CST tire

@kikkerdiegamed

2 ай бұрын

@@larryluna36 thx i'l look into it

@kikkerdiegamed

2 ай бұрын

@@larryluna36 ok so i looked and found big 17 inch tires that could go 220km/h and im making mine 200km/h so it will be fine

@larryluna36

2 ай бұрын

Yes you will be fine

nice bike man! you might be able to get more power by using grippier tires and better quality fuel

@larryluna36

3 ай бұрын

I think so too it’s basically all stock right now and just running on regular gas

What frame is this? I want to build one with a 420 or 469 but I’m worried about engine clearance

@larryluna36

Ай бұрын

This is a standard 5 inch BAM frame, not a custom frame it’s just a regular 5 inch frame. You will run into problems with clearance in a couple different places but I’d recommend you buy the gopower sports big block plate adapter to make it a lot easier.

what tire size and gear ratio u got ? i got a 420cc with stock style carb - 3.85 ratio - 145/70-6 tire and just hit 61mph today after i removed the balancer (wanted to see what it does - gained 1mph)

@larryluna36

2 ай бұрын

I have 5 inch tri-star rims with 11/5-5 tire rear and 4.10/3.50-5 front tire. Gearing on clutch is 14tooth and 35tooth rear sprocket. Motor is all stock just 28mm carb, exhaust and governor delete.

i got a 212cc built drag bike but the torque heavy 420cc is drawing me in to build another!! what was your carb size, and jetting ??

@larryluna36

3 ай бұрын

Starting with a 420cc even stock is already a head start because of how much more power and torque it has over a 212cc. The carb I’m using is a flat slide 28mm and the jet is a 120 and needle position is 2nd to the bottom. It runs perfectly smooth it doesn’t bog at all but I think it could use a little more tuning because the spark plug isn’t colored the way it should be

@NouriGains

3 ай бұрын

@@larryluna36 I got a 24mm pwk i got a 140 main 32 pilot silver needle in middle but im at 212cc 308 cam 1:1 champion rockers 27/25mm SS valves. You may need the main to be richer ? Subbed following the progress

Bro you needa seriously upgrade ur brakes 💯 fuckin awesome bike build tho 💯

@larryluna36

3 ай бұрын

Thank you man I appreciate it!! This foot brake finally works good now but yeah i know a actual disk brake set up would be much better

@Pizzastevesgardenandmore

3 ай бұрын

@@larryluna36 yeah get hydraulics 👍🏼👍🏼

are you in the Santa Ana area I ride out on that river bed all the time

@larryluna36

2 ай бұрын

Yes this is the Santa Ana river bed trail

Can you drop ths link for the rear sprocket

@larryluna36

22 күн бұрын

I got the rear sprocket from srericsgarage on insta.

That thing got a lot of room for improvement. Cam/valve springs?? 30mm carb? Better clutch? All things that will MPH faster. I bet you a clutch gets you 5mph. I have a cheap one now and it has to go. It ruins top end

@larryluna36

3 ай бұрын

It certainly does have a lot to improve. The only thing done to it is governor delete, a 28mm carb and exhaust with muffler. I do need to get a new exhaust because this one right now is for a 212 and the tube size is actually restricting the exhaust flow and it has a muffler to make it even more restrictive.

@larryluna36

3 ай бұрын

Internally everything is bone stock. No cam no valve springs or anything it’s completely stock just how it came out of the box

@mdp9810

2 ай бұрын

@@larryluna36where did you get the frame from

@larryluna36

2 ай бұрын

@@mdp9810 I got the frame from @backalleyminibikes on Instagram I messaged them and they were quick to reply.

@mdp9810

2 ай бұрын

@@larryluna36 thank you 🙏

What speedo app do you use

@larryluna36

2 ай бұрын

It’s called Speedometer 55 GPS Speed & HUD it’s only available for iPhone.

I love your video now add a billet flywheel and get more top speed and take off

@larryluna36

3 ай бұрын

It will definitely be a difference I heard the flywheels on these big blocks are significantly lighter. I will start adding performance parts next and just make it even crazier!! 🤣 thanks for watching

@Bighemi82

3 ай бұрын

@@larryluna36 your bike flying

what frame is that engine sitting on?

@larryluna36

3 ай бұрын

It’s a BAM 5” Frame it’s not custom just regular frame.

How did you mount the engine?

@larryluna36

27 күн бұрын

I have a video up on my KZread showing the process but I bought a gopower sports big block mounting plate and drilled new holes on my frame and had to grind the block a little .

@Strict30

26 күн бұрын

@@larryluna36 heck yeah

THAT THING IS FASTER THEN MY 125 I TOP OUT AT 80KMH

@larryluna36

3 ай бұрын

It is 😂 do you have a 125cc dirt bike?

@smoke.tokes420

3 ай бұрын

@@larryluna36 yeah its a pos lmao

@smoke.tokes420

3 ай бұрын

@@larryluna36 its on my page if you wanna check it out 1 down 3 up 125 4 stroke

@micahzetrovamoseley5256

2 ай бұрын

I recently bought a mega moto with a 98cc engine and a slight mod, I was testing out how fast i could go yesterday and reached 71kmh

What's the best carb for a stock 212 with a budget?

@larryluna36

3 ай бұрын

I honestly found the best carb set up for my old predator 212cc was a Amazon 26mm round slide carb. It ran perfect for me with a 125 jet and the little clip being 2nd to the top slot on the needle.

@flatearther5780

3 ай бұрын

@@larryluna36 how much do they cost?

@larryluna36

3 ай бұрын

I’ve seen the whole kit that comes with extra jets,filter,intake manifold and hardware for about $35-50

@larryluna36

3 ай бұрын

My 212cc all it had done to it was springs, 26mm carb, and exhaust and that carb set up was perfect for me and gained a good amount of power/speed.

@flatearther5780

3 ай бұрын

@@larryluna36 thats nice I'll have to look in purchasing one

What was ur gearing?

@larryluna36

Ай бұрын

It’s 14tooth on the clutch and 35tooth on the rear wheel

Goes faster then my 700cc quad 😑

@larryluna36

2 ай бұрын

😂 that quad will destroy this mini bike off road though. They’re so much fun

@theLyzhendricks

2 ай бұрын

@@larryluna36 Tru dat

What rim & tire size?

@larryluna36

13 күн бұрын

Rims are 5 inch tri star and tires are 11 inches

That is so sketch!!! I barely could go 30 on mine and it’s already fast 😭

@larryluna36

3 ай бұрын

It is sketchy and there’s people who go over 90-100 that must feel crazier

That's a stock engine fasho

@larryluna36

27 күн бұрын

Yes all stock internals with this 420cc predator