This took me a year to build up the courage to try and a week to get set up properly on my loom, but now I've got it going and I LOVE the results I am seeing. I made a youtube short that just really quickly shows the rundown of how to set up the 4 shaft weaving like this, but I want to do a more indepth video for people who were wanting to learn. This is so cool. Thank you so much for inspiring me!

I had no idea that 4 shaft could be done this way. You’ve just saved me hundreds of pounds as I really wanted to try a 4-shaft and all I have is the Kromski Harp

This opens up so many possibilities, thank you so much !

Wonderful! I'm in the process of setting up my own Ashford 24-inch rigid heddle loom using this same twill 1/2-2/3-3/4-1/4 threading on the string heddles. It will be the first time I've woven anything other than tabby weave, and I'm very excited to learn twill. One fine day I might get a table loom, but until that day comes, I'm enjoying what I have. Many thanks for this demo! 😄

Wow!!! How smart you are! Very interesting to see how you do that!

This is brilliant. I love it because it saves $ for extra heddles and can be done on any RH

Absolutely brilliant! Such a beautiful pattern. I'm struggling try to understand double weaving. I can't image 4 shaft weaving on a rigid heddle loom. You are the first on Ytube which I've seen using the Kromski Harp 24". I also own that same loom.

@AllIsWellaus

3 жыл бұрын

But is this double weaving though. From my understanding she is lifting four different shifts to complete the pattern. I am a beginner but that was my understanding from what she had shared.

wow so interesting thank you

thank you for this!

You are so smart! This is amazing.

Brilliant! I must try this! Can you add your heddle pattern to your notes at some point so I can figure this out?

that is SOOO clever! (and i LOVE your accent (i'm in minnesota))

This is awesome ,do you have a video on how to string up the rods? I need to try this .

Surely you mean the warps go just through the slots, not in the holes? You said the other way round, but with warps in the holes you won’t be able to raise the heddle rods.

@pamyclark1263

6 ай бұрын

On the heddle the warp only goes through the holes. The front heddle is typically set up this way as the upshed in the weaving pattern.

Could you please post a video showing “How” you threaded those extra “Reeds”. Thank you

@jessicag630

2 ай бұрын

See weavezine video about backstrap weaving. She shows how those are set up.

Wow.

Thank you. I was having a problem with starting mine and you really helped me out! Thank you Thank you.

@crazedscififan

5 жыл бұрын

I'm delighted it was a help to you! Best of luck with the weaving and I hope you have fun with it :)

@barbararickman8543

5 жыл бұрын

So, how is this begun? I am not sure just how to get the weaving started. I need to spread the warp. How is that done and what do you do if your warps do not raise up to make a shed or will they raise after the warp is spread.

@MJ-jf8nd

5 жыл бұрын

@@barbararickman8543 I am new at this but I found this video that helped a bit too. kzread.info/dash/bejne/qXWny9GDXZjHpLQ.html There are more out there that will help with other parts of this. One being the outside strand sometimes needs to be added by hand. Good luck.

@barbararickman8543

5 жыл бұрын

I did see the video you posted and asked her the same question. Was wondering how you begin the weaving AFTER the threading of the rods is finished. I need to spread the warp. She said to use cardboard but I don't have any of that. Will use a piece of wood to get the warp spread. The videos are incomplete when you don't say how to start the weaving after the rods are strung.

@MJ-jf8nd

5 жыл бұрын

@@barbararickman8543 You can use waste yarn too. Other people use that in their videos. I agree I have to find different videos to fill in the blanks. Hope this helps.

Could you also use pick up sticks or would that disrupt the pattern?

Me gustaria saber como se se va tomando la hurdiembre

What is the weaving width of the Kromski harp forte loom? Thanks.

I've used heddle rods in the past and I want to do the herringbone twill pattern. I'm just unclear on the tie sequece for the heddles. Can you post what sequence each rod is tied in?

I'm planning a weaving project using a second hand large beading loom and string heddles similar to this. Why did you leave the rigid heddle in place? Is it helpful in some way?

@deanofservice6120

3 жыл бұрын

It cuts down the the range of motion of the warp threads from side-to-side and up-and-down to just up-and-down. The warp threads stay in their own slot position and you don't have to worry about them that way. Also, the heddle is also your reed ( or beater) on a rigid heddle loom.

I love this idea...If I have two heddles, could I use both and then two dowels? Im just trying to conceptually work it out in my head.

@crazedscififan

3 жыл бұрын

Yes, I've definitely seen people doing that. Absolutely doable. I just haven't tried it myself :)

I have used 3 heddles in the past. I’m wondering if you could replicate 6 or 8 shafts with 3 heddles and some dowels

@qltygrl3187

3 жыл бұрын

I was wondering this as well.

What size/type yarn are you using? Worsted weight?

@crazedscififan

5 жыл бұрын

It's a DK weight acrylic, Robin I think.

So how is the yarn threaded through this 4 shaft

Houndstooth weave I can do that in plain weaving ? It is possible in 3 colour ?

If you had created actual string heddles that have eyes, I think you would not have to tug upward as hard. Otherwise great job

Why are you not using the heddle except for beating? Will this work on a two heddle loom with two shafts?

Hi, this video starts at a decent volume but shortly thereafter goes so quiet i can't hear the instructions. Very hard to follow for one trying to learn how to do an actual conversion from 4 shaft to rigid heddle. Positions are everything as you know, but if i can't hear it....

@SASoundsRock

2 жыл бұрын

How rude.

J'aime votre façon de tisser . Je cherche votre 1re video qui concerne l'ourdissage , et la trame ..indiquez le site svp.merci et un grand bonjour d'Algerie