3rd Gen 4Runner Lift
Автокөліктер мен көлік құралдары
3rd gen 4runner lift. In this video, I show you how I installed a suspension lift on my 3rd Gen Toyota 4runner (96-02). The process is very similar to many other Toyota vehicles including Tacoma,
FJ Cruiser and newer 4Runners. I'm running 285/75/R16 which measure out to about 32.8"
I used Bilstein 5100 shocks and struts, Ome 2883 coils front & 2890 rear.
Total Lift: Front should be 3" lift and rear should be 3-3.5" lift depending on weight.
*Bilstein 24-248730 & 24-249966 Pair of B8 5100 Front & Rear Monotube Shocks for 96-02 Toyota 4Runner
Sway bar end links ( front 3rd gen 4runner links to the rear) ( rear 2nd gen 4runner links to front)
Пікірлер: 372
This guy kinda sounds like Robert Downey Jr in Iron man 😂
@Beacon_Offroad
3 жыл бұрын
Damn you too huh. I never realized but you're not the first to say it lol.
@calebmelton5989
3 жыл бұрын
Hardly
@dozerboy67
3 жыл бұрын
Totally man! 🤣🤣🤣🤟
@frontrowhurricaneshutters1670
2 жыл бұрын
I was thinking that same..
@MrAlboogie04
2 жыл бұрын
But he looks like Marc Anthony lol
Straight up info and helpful tips.. definitely gonna take on this project. Thanks man👏👏👏
Really appreciate your video and time you take to explain! Great job
Best Toyota video I've seen in forever 😆
Solid! Makes me want to take on a 4runner lift in the future
Thanks bud, very chill and easy to listen to. Unlike all the others loud and obnoxious
You've got me thinking about re-doing my front end w/ OME springs instead of the original springs and the 5100s
Great video, very quick, simple, and not too much blabber.... excellent visual aid! Keep it up!!
@Beacon_Offroad
2 жыл бұрын
Thanks William.
Honestly man, this video was highly informative. Very cool
@Beacon_Offroad
2 жыл бұрын
Thanks
Thanks for the great video and nice lookin Yota
Thanks for this! Very informative!
I think ur videos are Always so informative & well explained. Thank you...if I may suggest ...explanation of the tools u use to explain proper use of the actual tool like this spring compressor. I fortunately have access to many different tools but not sure exactly proper & safe use of them.....Just a mere suggestion 👍👍👍 Keep up the Great Work 💪💯👍💯👍
Wow, the end results look great! Nice job with the truck and the video. Like how you even posted the parts in the description. Thanks!
@Beacon_Offroad
3 жыл бұрын
Thank you.
Super sweet rig !
@Beacon_Offroad
3 жыл бұрын
Thank yoj
Very good one .. really appreciate it and looking forward to get an appointment in future to do it on my 3 rd gen 4 runner ..
@Beacon_Offroad
Жыл бұрын
Thanks, sounds good.
Such valuable information. Thank you very much! Instantly subscribed
Looks good brother
Total badass looking.
@Beacon_Offroad
3 жыл бұрын
🤘
Just found your channel. I subbed and shared it to a few buddy’s. Good work👍
@Beacon_Offroad
3 жыл бұрын
Awesome, thanks man. I appreciate that very much.
Awesome video. Thanks.
Very helpful thanks for sharing
3rd gen 4runners with E-lockers are beasts for what it is. A very valuable asset.
@Beacon_Offroad
3 жыл бұрын
Definitely put it to the test today. She goes places!
@ag1639
2 жыл бұрын
E locker? A dif lock?
@510kali
2 жыл бұрын
@@ag1639 yea..the rear diff lockers "RR diff"
First view of your channel - liked and subscribed. Will catch up on past videos and look forward to new. Cheers.
@Beacon_Offroad
3 жыл бұрын
Awesome. Thank you
Can't wait to do this to mine! Good video, truck looks good as well. 👍
@Beacon_Offroad
2 жыл бұрын
Do it! Goodluck as well. As we speak I'm working the shop building a customers exactly like mine. 👍
Great vid! Keep it up!
@Beacon_Offroad
3 жыл бұрын
Thank you 👍
Great video!
Great Video will order parts and do my truck next week.
@Beacon_Offroad
3 жыл бұрын
Thanks, goodluck with yous.
Nice job!
Great job
Awesome Vid. Thanks Sir!
@Beacon_Offroad
3 жыл бұрын
T You're welcome 🤘
Nice! Thanks
Very nice!!!
Tony Starks arch in his interest in automotive engineering.
@Beacon_Offroad
2 жыл бұрын
😂
Thank you for the helpful video. What top hat (strut mount) did you use for the front shock?
@Beacon_Offroad
2 жыл бұрын
Moog strut mount. Can be found at most parts stores.
Great job! Though it always freaks me out to see people doing this kind of work without eye protection. I guess it's the dad in me.
Wow, I didn't expect a 4runner lift video to pop up in my recommended. I'm getting an extremely similar set up done next week with 883/890 + bilstein 5100. My 98 is literally the same paint with grey flares. You have no idea how happy I am to see such a video. Can't wait to get my 4runner worked on!
@Beacon_Offroad
3 жыл бұрын
Similar? That's exactly what I installed lol. I've been out in it a few times now and its working great, videos coming. Goodluck with your build.
rear shocks: remove the bottom bolt. The top will be rusted so just bend back and for for 2-8 minutes or grind off like he did. Both work well.
If the rear end is open and you decide to regear, i recommend a detroit true trac... we did on my son's '97 and it's great...
@Beacon_Offroad
3 жыл бұрын
Thanks, I'll keep that in mind and investigate when it comes time.
Pro job
Hey brother I have a 98 SR5 I just picked up Bilstein 5100s in Old Man emu coils as well I am getting them installed this weekend at my buddy's shop he will also be doing the same sway bar end links front to the rear second gen rear to the front. I also got a panhard correction kit he's going to be welding on. I appreciate the video your limited looks awesome man.
@Beacon_Offroad
3 жыл бұрын
Hell yeah. You'll love, having a blast on the trails with mine.
@thomasburr9244
3 жыл бұрын
@@Beacon_Offroad awesome man awesome. I did not get a gift drop kit yet I am going to go without it for a couple weeks and if I feel it is necessary I will do it after that when I do the lower ball joints I plan on doing those in a month replacing with OEM Toyota lower ball joints my runner only has 115k but I don't want to take any chances they don't look terrible but they don't look brand new either LOL. would you recommend Toyota OEM lower ball joints? That's what everyone says even though they're somewhat known for failing no one seems to recommend any other aftermarket brand do you know any that you might recommend or would you say oem?
@Beacon_Offroad
3 жыл бұрын
@@thomasburr9244 Well here at my shop we definitely install aftermarket joints regularly. That being said, everyone got in my head as well and I recently bought oem for my truck.
@thomasburr9244
3 жыл бұрын
@@Beacon_Offroad so you have installed aftermarket lower ball joints on 4runners? But you got scared of all the naysayers in the forums so you went OEM for your own runner LOL yea kind of the boat I'm in there's not a massive price difference between the two
@Beacon_Offroad
3 жыл бұрын
@@thomasburr9244 not actually any runners, just usual stuff we see around the shop. After seeing the 3rd gen 4runner lower ball joint failure support group page on Facebook im horrified 😄 hahaha
🔥
I’m installing a 3in Rough Country this weekend, hopefully all will go well
@Beacon_Offroad
3 жыл бұрын
Goodluck
@Adam_Newman
3 жыл бұрын
@@Beacon_Offroad is the Rough County a decent lift ? Later on after installation I’d like to add some Bilsteins
@Beacon_Offroad
3 жыл бұрын
@@Adam_Newman is it a spacer lift ?
@Adam_Newman
3 жыл бұрын
@@Beacon_Offroad The entry level was but I upgraded to the one with new struts in the front & springs rear
@Beacon_Offroad
3 жыл бұрын
@@Adam_Newman oh good, then it should be fine.
Great video(s). I started following along and catching up on all the videos as I just picked up a 97 SR5 project. Just curious (in your opinion as there and many on the web) after having the diff drop for a while now.. do you think it was worth it and did what it was supposed to do? Thanks for any input you might have.
Nice camera angles! Visualises nicely how it's done. How do those 883's ride? They are the heaviest spring for the 3rd gen with heavy bumpers, right? So they would have a lot of preload when on the shock, no? I'm looking for the smoothest off-road ride and can't really find comfort related reviews, it seems everyone is just concerned with lift.
The pan hard kit that you welded onto the rear for correcting the lift for the track bar - is this kit included with the Bilstein suspension lift or is this pan hard kit sold separately? If sold separately, could you please provide the link? Thanks!
I just bought a 99 4Runner today with 110k original miles thing is super clean it's all black I'm going to lift itput it on some fat new tires get a custom front bumper and roof rack it's going to be dope
@Beacon_Offroad
3 жыл бұрын
That's my plan too haha
@thomasburr9244
3 жыл бұрын
@@Beacon_Offroad I just got it I am so excited it's a survivor low mileage extremely nice condition black SR5 I am going to get a nice lift and some nice motors roof rack eventually a metal bumper I can't wait I will be following you thank you for the inspiration
@JamesBond-my8ep
3 күн бұрын
@@thomasburr9244do you still have it and how much did u pay for it
Great Video.. It came out Awesome 👌... keep them video coming & keep up the GREAT WORK..💪👍💪👍💪💪 Yazmin Venice Beach CA ⛱ New subscriber 👍 UP
@Beacon_Offroad
3 жыл бұрын
Thanks Yazmin.
@yazming1720
3 жыл бұрын
@@Beacon_Offroad i have a 10/98 4Runner SR5 2wd. Want to convert it to 4wd. Do you think using a donor 4Runner 4x4 is cost effective $$$ or just buy a 4x4 4Runner? Yazmin Venice Beach CA ⛱
@Beacon_Offroad
3 жыл бұрын
Waaaay less hassle to just sell and buy another. Maybe find one on a used lot and trade plus cash depending on the deal. That's what I'd do.
@yazming1720
3 жыл бұрын
@@Beacon_Offroad Thank You for your advice. I bought this from my accountant (original owner) in mint condition & maintenance regularly. But I going with your advice as far as just buying another one and lift both of them. Thinking 2 inch lift on the 2wd & wheels & 3 in. Lift on the 4x4 i hopefully find close to mint. Thanks again...I ask you for your advice cause you came across confident & clear a trait long forgotten THANK YOU Yazmin Venice Beach CA ⛱
Curious on where you got the bushing for the top of the strut. My 5100 didn’t come with them and my Kyb top hats didn’t come with them but they have the bushing built in just like the ones you have. Thanks! love the vids
Same lift I have on my 4runner
This video was very helpful, I’m new to your channel and I really appreciate it, were new CV axles or extensions required ?
@Beacon_Offroad
3 жыл бұрын
Existing oem axles in vehicle. No issues to report at this time. Been out wheelin almost every weekend.
@pikinachu9850
3 жыл бұрын
@@Beacon_Offroad Good to hear, ive heard people on forums saying they tear their CV boots due to the lift.
@Beacon_Offroad
3 жыл бұрын
@@pikinachu9850 same. I assume eventually the boots will fail but I definitely have pulled mine off. Is heard of that happening. If it does apparently you can get extended heavy boots and that's what I'll do.
@pikinachu9850
3 жыл бұрын
@@Beacon_Offroad Alrght brotha good luck, I’m anxious to further see your build.👍
Niiiiiiiiiiiiiiiiiiiiiiiiiiice video
Great video! Where is the best place to order bilsteins in Canada? Any suggestions?
whats the way to mitigate the driver's side lean as you described/measured in your other video? Isn't one side spring supposed to be longer than the other?
Great video can you tell me where you bought your springs and shocks from the 883‘s and Bluestein 5100 Pt
So stock upper control arms with 3 in lift works ? Saw people saying you need aftermarket but seems like you aligned it fine. About to order same set up for mine thanks for the video
Sir what would you suggest if I were to do outboard rear shocks, with my 891 rear springs, shock that would have an eyelet Top and bottom for this lift? (Upper shock mounts are toast).
How to the 3rd gen fronts compare in length to 2nd gen rears? I am thinking to just use 2nd gen rears all around if they are longer than the 3rd gen fronts...
Thanks for the video. New UCA to clear tires or just proper rims with dimensions to fit them in the wheel well? Thanks for the answer 🙂
@Beacon_Offroad
3 жыл бұрын
I have some spc's sitting under the bench ready for install but not on yet. I geuss just proper wheel fitment.
do you have a link for where you got the spacers for the front dif?
I do have a e locker carrier it came out of a 3 gent 4 runner needs bearing
I know the rear sway bar links for a 2nd gen will work for the front in a 3rd gen. And the front sway bar links for a 3rd gen will work on the rear. What’s the ones you installed here and the part number?
She's looking good. Let's lift my car next 😂
Great vids and info all around… where are you guys located in case we need works done on our 3grunner?
@Beacon_Offroad
Жыл бұрын
You always message me on Instagram. Same name..
2' inch wheel spacers?
Nice video. Are there any downsides to lifting a truck? Does it do any extra wear and tear to a transmission or engine? Thanks-
de cuanta pulgada son los 2 tacos de aluminios que colocas adelante
Hey on a 1999 prerunner, it leans to passnger side about 1 1/2 inch... what could main causes be? I replaced all front suspension. Would it be the leaf springs? ?
Very good video!! Could you please supply the Bilstein 5100 part numbers for both front and rear? I own a 1996 4Runner LTD that I want to lift the same way you did, thanks!!
@Beacon_Offroad
3 жыл бұрын
added part numbers in the description. Thanks
My 2nd gen Yukon is on Bilstein 5100 all around and a leveling kit, what would you recommend for a similar lift please if not more?
Looks awesome! Keep up the great work man. How much did it cost in total for the bolstering and OME? Looking to get the same lift on my ‘00 4runner. Thanks
@Beacon_Offroad
3 жыл бұрын
Thanks. To be honest I don't really remember exactly anymore. Around 1000 I think.
With the 883’s being the more heavy duty spring, how did u find the ride quality with no extra weight at the time?
Hey man I installed the 890’s the coil that has A was taller than B but when installed I have a drivers side rake . Should I switch them. I know the taller coil was suppose to compensate the weight of the gas tank on the drivers side. Any suggestions would be helpful
Hey bro love the videos! I have a question when you got your 285/75/16s did you have Any rubbing issues? I got some pro comp 17x9s just trying to figure out if lll be able to clear those to I just redid the suspension with a 3 inch toytec lift. Obviously I’d need 285/75/17 just want to hear your take on it thanks 🙏
@Beacon_Offroad
Жыл бұрын
Alignment set up is key. We do a lot of Toyota alignments at my shop. Having someone who understands how to get the most clearance will be a big help. Since that set up ive had, 285/70/17, 285/75/17 and now 295/70/17, all with very little to no rub. Check out my channel.
Hey man, I recently installed a 3 inch lift kit onto my 4Runner. I followed all the instructions and now it looks like the front end is higher than the back end. Almost like it’s tilted backward. What do you think the issue is? Thanks
Do you have any link to get the differential spacers I don't get them for the 4runner 3rd gen please help me.
wow is great; How much would it cost me to do all this update to my Toyota RAV4 2017 LE?.
I've been watching for about a month. Juat got an amazing condition 02 T4R. The only thing I cam tell that's bad is the rack and pinion and paint. Stil have to take it to do smog test and register to make it legal, maintenance, and then mods 😀 Also, what do you know think of the front diff drop kit? Did it make a difference and if it did, was it worth it?
@Beacon_Offroad
2 жыл бұрын
Awesome. Tbh I cant really even tell, but considering its so cheap, why not right.
Did you install any wheel spacers to the front and back if you did what size did you installed? L I also wonder if you had any issues with the wheels clearing the frame or body not rubbing when turning Thanks it was great video!!! Loved it
@Beacon_Offroad
3 жыл бұрын
Once the wheels were put on I don't have spacers. Today I'm filming a walk around video on my truck and my nephews who I wheel with. Well go over all these things. I'll drop that video mid or later in the week.
@godo1068
3 жыл бұрын
@@Beacon_Offroad thank you iwill be watching it
que opinan de la suspension dobinson
About how much did you put into the suspension with labor and everything
Thank you for the video. I have a question, how is the ride quality compared to the stock setup? Thanks
@Beacon_Offroad
Жыл бұрын
Its good, slight upgrade.
Hey Kelly, was curious if you considered the 2000-2006 tundra coils up front with bilsteins. Just researching and seeing multiple people with your same set up and ones with the tundra coils. What were your thoughts or research on the two lifts for the front? Hope that makes sense ..Thanks
@Beacon_Offroad
2 жыл бұрын
I definitely have heard of that before. My setup definitely seems to donthe trick. That being said, I'm going to be switching to landcruiser rear springs, they are fairly tall but I plan to carry a fair amount of weight.
@WestCoastTug
2 жыл бұрын
Thanks for quick reply!
The 5100 shocks you put on the rear state they are for a 0-2" lift. The 2890's provide a 2.5"-3" lift. Are there any real issues with using a longer coil on those shocks? I ask because I used the same shocks when I installed FJ cruiser coils on my 3rd gen, and now I would like to go with a 3" coil due to added weight in my cargo area.
@Beacon_Offroad
3 жыл бұрын
Those springs are definitely closer to 2.5" not 3 forsure. No issues on a handful of 3rd gens. Most who go above 3" or closer to 4 run the land cruiser shocks as they are longer.
@txrunroutdoors
3 жыл бұрын
@@Beacon_Offroad to clarify, are the shocks you are using the ones made for the 3rd gen, or are they the ones usually advertised as extended travel (4th gen/FJ cruiser shocks)? Sorry to bug you man, I'm just strongly considering going with the 2890's on the 3rd gen specific 5100 shocks.
@Beacon_Offroad
3 жыл бұрын
Correct, These are the for 3rd gen 4runners, when looked up. They fit others as well I believe.
Why wheel spacers? Is it so it doesn't rub?
Hey, did you leave the stock control arms in or did you have to swap out later?
@Beacon_Offroad
2 жыл бұрын
At that point they were stock. I did change them shortly after but it worked fine without.
I am from Venezuela I have a 4runner 1998 4x4 with front bumper with winch and rear bumper with rubber holder I have weight in front and behind that you recommend me to mount Bilstein 5100 and what springs old man emu
4:10 why does he sound like billy bob thornton narrating bad santa lol
Hello just found your channel very helpful!/ will this setup handle a roof top tent? and added cargo?
@Beacon_Offroad
3 жыл бұрын
The front 883s would be good, I'd opt for the 891s in the rear. I'll be switching to those as well as I carry a lot of gear.
@NPHTV12
3 жыл бұрын
Awesome ! Thank you for the quick response will definitely get 883&891s
Hey, your runner looks great! Your spare tire is the same size 285/75 R16? If yes, what modifications did you make to fit it under the vehicle where the spare tires should go?
@Beacon_Offroad
3 жыл бұрын
Thanks, no it definitely isn't. I dont believe it will fit. Won't really work to drive with but until I figure out a real plan it'll be there for emergency.
@gomezbanda
3 жыл бұрын
@@Beacon_Offroad thanks bro, I really love your runner.
Was the steering behavior affected after you lifted your runner? I lifted my 1996 Limited as per your video and now my steering feels a lot different. The steering wheel does not exactly want to return to the center position on its own. I did not go to bigger tires yet!! Could this be affecting the steering??
@Beacon_Offroad
Жыл бұрын
None what so ever. We lift lots of Toyota's here at the shop. Cant say ive ever heard of this happening for that reason.
Where did you get the kit for the rear track bar that you installed it ? How do I find that 2 pieces that need to be welded on right?
@Beacon_Offroad
3 жыл бұрын
Emkieth pck. Just Google it and you'll find his site.
@KBAutotech&Adventure can we get a link for the parts ive been wanting to put some clearance on my 4runner and wanna make sure i get all the right parts
Does it drive rough with the 883 since they're heavy duty, i wanted to lift my 2" only what should I had gotten. I think i messed up on my order i got 881 front and 891 rear. Advice will really help
@Beacon_Offroad
2 жыл бұрын
No, not at all. I think that's the way it should. You'll be ok 👍
If you had to do this again, and you can have bilstein/OME at the same price point as all OME (shocks and coils) what would you choose for your 3rd gen?
@Beacon_Offroad
Жыл бұрын
For the money, yes, absolutely. That being said, I'll be doing my whole suspension again later this year and ill likely go Dobinsons Ims but thats going to cost double.
What made you choose the 890’s over the 891’s for the rear? Does one offer more height than the other? Thank you.
@Beacon_Offroad
3 жыл бұрын
Availability at the time.
@prodigalvlogs9557
3 жыл бұрын
@@Beacon_Offroad do you know if they both offer the same height? Do you sag when filled with passengers? I’m stuck between the 2890 and the 2891
I’m having trouble getting the bottom strut bolt holes to line up. You used a pry bar and piece of wood. How would I go about it?
@Beacon_Offroad
Жыл бұрын
This usually isn't much of the battle. Wiggle wiggle, if not, put a longish punch or reamer in there to help line it up first.
Any issue with cv axle? Did diff drop spacer works? And if i do 1.5" lift do you think i still need all the extra parts you installed? Llke the links and all the spacers Thank you hope you can answer my questions
@Beacon_Offroad
3 жыл бұрын
It hasnt been too long, but so far no issues with the cv boots. I wouldnt say you need them, but eventually it would be good to do as it will be a bit better.
@nicolasortega2780
3 жыл бұрын
Thank you i really appreciate
Hey man do you still have your front fender/bumper flares, would like to buy them
Would you recommend doing the swaybar link swap with a 2" lift or would they be too long?
@Beacon_Offroad
2 жыл бұрын
You'd be ok either way I'd geuss..
Stock UCAs okay in this configuration?