Use the same in my shop love it bro it's a game changer mine warns you when filter is blocked great product 👍👍
@georgeg81302 жыл бұрын
Great Mask!! Great for sealer. great for base. Not so much for clearing especially white colors, reflections even with new clean visor. Sata Air Vision 5000 is better, since no visor is used and way less reflections, but still hard with clearing white vehicles. I have both to compare and often i have to put regular 3m mask on final clearing coat.
@juanmata24332 жыл бұрын
I love mine. Did the backpack with shorter tube and it’s pretty awesome bro. Very much worth the investment. I have almost the exact same job set up for Monday morning! NAH used door, quarter repair, bumper repair and blend front door
@kandyman5315
2 жыл бұрын
I was wondering about the hose needing shortened .gonna check it out thanks 💪
@juanmata2433
2 жыл бұрын
@@kandyman5315 I used this 3m part number #37309
@PatAsbury
Жыл бұрын
@Kandy Man how long do your filters last until you need to change it out on average?
@tattoobeast772 жыл бұрын
I use the backpack I used the waist for a while but that rubber strap stretches out a lot and starts hanging on you only complaint on backpack is it’s a pain to put on sometimes
@kandyman5315
2 жыл бұрын
The belt does seem not as good as old one
@jeremyoetken20942 жыл бұрын
I have the Sata 5000 vision. It's nice. I just have one hose going to the regulator with a whip hose going to the gun. That looks like a nice system too
@kandyman5315
2 жыл бұрын
I used that system for years great setup as well as the tr 800
@edilanc3911
Жыл бұрын
Are you sure you have sata 484 filters??photo show
@jeremyoetken2094
Жыл бұрын
Yes
@punkinsgarageandpaint82992 жыл бұрын
I have always wanted on of those.
@kandyman5315
2 жыл бұрын
Great protection for you 👍
@keithbell86902 жыл бұрын
That unit is lighter and feels better. Have you considered the full face versa Flo helmet with replaceable inner and outer shroud?
@kandyman5315
2 жыл бұрын
Haven't seen it thanks for the information
@deborina1792 Жыл бұрын
Great paint job just wondering do they offer tear-off lens that you just rip off when covered in paint? thanks
@kandyman5315
Жыл бұрын
Yes
@jessehndz Жыл бұрын
Nice bro. Love the video. What paint line do you use? NAH wasn’t there stage for me :/
@kandyman5315
Жыл бұрын
Sherwin Williams on this one thanks for watching.
@coastaboi7472 жыл бұрын
Hey man. I'm looking at getting a new air compressor soon. Looking at a rotary screw compressor with air dryer and vsd. What is needed filter wise for a air feed mask?
@kandyman5315
2 жыл бұрын
Sata makes a setup not sure of other companies air has to be breathable free of any oil or water I would go with sata to be safe
@coastaboi747
2 жыл бұрын
@@kandyman5315 thanks man.
@ae44282 жыл бұрын
Hey man are these suitable for our trade though? As in are they designed for us refinishers? I hear the air compressed ones are but not sure about the battery operated air systems
@kandyman5315
2 жыл бұрын
Yes it is tr800 is make sure its for painting they make ones for medical and other trades
@pd74392 жыл бұрын
everything is better about the new papr except battery life. The old school batman battery pack lasted much longer, but charged slower.
@marklynsmith35102 жыл бұрын
How do feel about the iwata supernova 1.3 hvlp entech gun for base and pearls
@kandyman5315
2 жыл бұрын
Haven't tried it heard its a good gun
@deanbrown76432 жыл бұрын
I know it's expensive £1000 about $1.300 but absolutely worth it
@Mr.Snowboard5 ай бұрын
Thanks for the review! About how many hours do you think you get out of a filter?
@kandyman5315
5 ай бұрын
The filter last a very long time and let's you know when it needs to be replaced
@GlennLaguna11 ай бұрын
How much does the helmet/mask and hose weigh? Wondering how much weight your head needs to support
@kandyman5315
11 ай бұрын
It's not bad at all not sure exactly how much it's weight is
@Mechaniclyfe2 жыл бұрын
I have the TR600 , love it , will never go back to anything else
@kandyman5315
2 жыл бұрын
Great system 👏 👌
@meticulousdetail51402 жыл бұрын
How about keeping overspray off face shield or clear part
@kandyman5315
2 жыл бұрын
It has a peel off lens cover that you change when needed.
@meticulousdetail5140
2 жыл бұрын
@@kandyman5315 thanks- is it clear so it will protect from overspray while painting?
@kandyman5315
2 жыл бұрын
Absolutely correct 👍 thanks for watching
@hughjass70252 жыл бұрын
Kandy Man, Are you still liking this mask now that you have had it a while? Any idea if you can wear eyeglasses with this mask?
@kandyman5315
2 жыл бұрын
Yes it is great and I'm sure you can wear glasses plenty of room
@gersoncoelho7972 Жыл бұрын
Quei pode midua uma dessa máscara
@ANDY-we7mr10 ай бұрын
Cracking piece of kit 😅😅
@kandyman5315
10 ай бұрын
🤣
@draganmarunic270910 ай бұрын
how often the filters are changed
@kandyman5315
10 ай бұрын
About every 2 months
@dkv6743 ай бұрын
Do you prefer the 3M TR 800 versus the Sata 5000 vision?
@kandyman5315
3 ай бұрын
Yes it can go anywhere in the shop without a hose connected. And it works great
@dkv674
3 ай бұрын
@@kandyman5315 and it protects from isocyanates??
@kandyman5315
3 ай бұрын
@@dkv674 absolutely
@dkv674
3 ай бұрын
@@kandyman5315 excellent, I see it online for about $2900. Trying to find the best deal. hopefully I can purchase one today. Thank you!
@partyboy03199 ай бұрын
Whatvkind of shirt are you wearing. I hate the full suit it makes you sweat alot.
@kandyman5315
9 ай бұрын
Lab coat
@MachoMaamRandallSandwich4 ай бұрын
Will it protect against nitrocellulose ?
@kandyman5315
4 ай бұрын
I know that's in some paints check with 3m
@jackross7_11 Жыл бұрын
Is it glasses friendly?
@kandyman5315
Жыл бұрын
👍
@kromo232ify Жыл бұрын
Bro ,they’re still fumes and you breathing it after you took off mask to explain at the end ,im just saying I can’t do that especially after clear coat ,that one gets me pretty bad even if I breathe a minimum bit of it ,I use an allegro fresh air ,but this one looks easier to handle and you don’t have a 100 feet hose ,I wonder if the seal on that mask fits tight on your skin
@kandyman5315
Жыл бұрын
👍
@Il-js9ul
9 ай бұрын
How is the allegro
@kathleenross48207 ай бұрын
Can you smell the paint?
@kandyman5315
7 ай бұрын
Not at all
@davidpardo62702 жыл бұрын
What’s up bro how much did you pay for it ?
@kandyman5315
2 жыл бұрын
It go's for around 2500
@juanmata2433
2 жыл бұрын
Damn they are more now than when they first came out.. fckn covid19 did that.. I paid 1800$ for mine
@user-qx9rl2ud1o10 ай бұрын
Is there enough room for glasses?
@kandyman5315
10 ай бұрын
Yes
@user-qx9rl2ud1o
10 ай бұрын
@@kandyman5315 Thanks for the quick reply
@chase_modugno Жыл бұрын
Anyone know of an air fed mask that's comparable to this one, and won't force me to sell a kidney to be able to afford?
@kandyman5315
Жыл бұрын
They are not cheap .but health is important
@ze_german29212 жыл бұрын
Can you still smell the paint while wearing it?
@kandyman5315
2 жыл бұрын
Not at all
@kandyman5315
2 жыл бұрын
If you smell paint it's not safe
@ze_german2921
2 жыл бұрын
@@kandyman5315 which model cartridge do you use? I have a TR-671N and it is just for particulets like silica
Пікірлер: 82
Use the same in my shop love it bro it's a game changer mine warns you when filter is blocked great product 👍👍
Great Mask!! Great for sealer. great for base. Not so much for clearing especially white colors, reflections even with new clean visor. Sata Air Vision 5000 is better, since no visor is used and way less reflections, but still hard with clearing white vehicles. I have both to compare and often i have to put regular 3m mask on final clearing coat.
I love mine. Did the backpack with shorter tube and it’s pretty awesome bro. Very much worth the investment. I have almost the exact same job set up for Monday morning! NAH used door, quarter repair, bumper repair and blend front door
@kandyman5315
2 жыл бұрын
I was wondering about the hose needing shortened .gonna check it out thanks 💪
@juanmata2433
2 жыл бұрын
@@kandyman5315 I used this 3m part number #37309
@PatAsbury
Жыл бұрын
@Kandy Man how long do your filters last until you need to change it out on average?
I use the backpack I used the waist for a while but that rubber strap stretches out a lot and starts hanging on you only complaint on backpack is it’s a pain to put on sometimes
@kandyman5315
2 жыл бұрын
The belt does seem not as good as old one
I have the Sata 5000 vision. It's nice. I just have one hose going to the regulator with a whip hose going to the gun. That looks like a nice system too
@kandyman5315
2 жыл бұрын
I used that system for years great setup as well as the tr 800
@edilanc3911
Жыл бұрын
Are you sure you have sata 484 filters??photo show
@jeremyoetken2094
Жыл бұрын
Yes
I have always wanted on of those.
@kandyman5315
2 жыл бұрын
Great protection for you 👍
That unit is lighter and feels better. Have you considered the full face versa Flo helmet with replaceable inner and outer shroud?
@kandyman5315
2 жыл бұрын
Haven't seen it thanks for the information
Great paint job just wondering do they offer tear-off lens that you just rip off when covered in paint? thanks
@kandyman5315
Жыл бұрын
Yes
Nice bro. Love the video. What paint line do you use? NAH wasn’t there stage for me :/
@kandyman5315
Жыл бұрын
Sherwin Williams on this one thanks for watching.
Hey man. I'm looking at getting a new air compressor soon. Looking at a rotary screw compressor with air dryer and vsd. What is needed filter wise for a air feed mask?
@kandyman5315
2 жыл бұрын
Sata makes a setup not sure of other companies air has to be breathable free of any oil or water I would go with sata to be safe
@coastaboi747
2 жыл бұрын
@@kandyman5315 thanks man.
Hey man are these suitable for our trade though? As in are they designed for us refinishers? I hear the air compressed ones are but not sure about the battery operated air systems
@kandyman5315
2 жыл бұрын
Yes it is tr800 is make sure its for painting they make ones for medical and other trades
everything is better about the new papr except battery life. The old school batman battery pack lasted much longer, but charged slower.
How do feel about the iwata supernova 1.3 hvlp entech gun for base and pearls
@kandyman5315
2 жыл бұрын
Haven't tried it heard its a good gun
I know it's expensive £1000 about $1.300 but absolutely worth it
Thanks for the review! About how many hours do you think you get out of a filter?
@kandyman5315
5 ай бұрын
The filter last a very long time and let's you know when it needs to be replaced
How much does the helmet/mask and hose weigh? Wondering how much weight your head needs to support
@kandyman5315
11 ай бұрын
It's not bad at all not sure exactly how much it's weight is
I have the TR600 , love it , will never go back to anything else
@kandyman5315
2 жыл бұрын
Great system 👏 👌
How about keeping overspray off face shield or clear part
@kandyman5315
2 жыл бұрын
It has a peel off lens cover that you change when needed.
@meticulousdetail5140
2 жыл бұрын
@@kandyman5315 thanks- is it clear so it will protect from overspray while painting?
@kandyman5315
2 жыл бұрын
Absolutely correct 👍 thanks for watching
Kandy Man, Are you still liking this mask now that you have had it a while? Any idea if you can wear eyeglasses with this mask?
@kandyman5315
2 жыл бұрын
Yes it is great and I'm sure you can wear glasses plenty of room
Quei pode midua uma dessa máscara
Cracking piece of kit 😅😅
@kandyman5315
10 ай бұрын
🤣
how often the filters are changed
@kandyman5315
10 ай бұрын
About every 2 months
Do you prefer the 3M TR 800 versus the Sata 5000 vision?
@kandyman5315
3 ай бұрын
Yes it can go anywhere in the shop without a hose connected. And it works great
@dkv674
3 ай бұрын
@@kandyman5315 and it protects from isocyanates??
@kandyman5315
3 ай бұрын
@@dkv674 absolutely
@dkv674
3 ай бұрын
@@kandyman5315 excellent, I see it online for about $2900. Trying to find the best deal. hopefully I can purchase one today. Thank you!
Whatvkind of shirt are you wearing. I hate the full suit it makes you sweat alot.
@kandyman5315
9 ай бұрын
Lab coat
Will it protect against nitrocellulose ?
@kandyman5315
4 ай бұрын
I know that's in some paints check with 3m
Is it glasses friendly?
@kandyman5315
Жыл бұрын
👍
Bro ,they’re still fumes and you breathing it after you took off mask to explain at the end ,im just saying I can’t do that especially after clear coat ,that one gets me pretty bad even if I breathe a minimum bit of it ,I use an allegro fresh air ,but this one looks easier to handle and you don’t have a 100 feet hose ,I wonder if the seal on that mask fits tight on your skin
@kandyman5315
Жыл бұрын
👍
@Il-js9ul
9 ай бұрын
How is the allegro
Can you smell the paint?
@kandyman5315
7 ай бұрын
Not at all
What’s up bro how much did you pay for it ?
@kandyman5315
2 жыл бұрын
It go's for around 2500
@juanmata2433
2 жыл бұрын
Damn they are more now than when they first came out.. fckn covid19 did that.. I paid 1800$ for mine
Is there enough room for glasses?
@kandyman5315
10 ай бұрын
Yes
@user-qx9rl2ud1o
10 ай бұрын
@@kandyman5315 Thanks for the quick reply
Anyone know of an air fed mask that's comparable to this one, and won't force me to sell a kidney to be able to afford?
@kandyman5315
Жыл бұрын
They are not cheap .but health is important
Can you still smell the paint while wearing it?
@kandyman5315
2 жыл бұрын
Not at all
@kandyman5315
2 жыл бұрын
If you smell paint it's not safe
@ze_german2921
2 жыл бұрын
@@kandyman5315 which model cartridge do you use? I have a TR-671N and it is just for particulets like silica
@kandyman5315
2 жыл бұрын
Tr 6510n
@ze_german2921
2 жыл бұрын
@@kandyman5315 thank you so kindly!
😊🤔🤗👍✌️
Stay healthy 💯💯💯💪💪💪💪👍👍👍👍👊👊👊😄😄😄😄
@kandyman5315
2 жыл бұрын
💯💯😁😁
sata air vision 5000 es mejor