"It's working well enough that there's a very real risk I won't ever finish it." - This resonated straight to my core. Now excuse me for a moment while I go weep in my pile of 80% finished projects that manage to occupy 90% of my sub-conscious mental bandwidth 😂😭.

@arthurmorgan8966

2 жыл бұрын

Hiding them out of plain sight in boxes works to free up the mental bandwidth

@tgirard123

2 жыл бұрын

Oh my God that is so true. I walk out in my garage sometimes and look at everything and go, I'm going to do this, I'm going to do that, and when I'm done with those two things I'm going to do this other thing, then I go back in and watch TV....

@baghdadmerc69

2 жыл бұрын

🤣🤣🤣 🙈🙈🙈

@Clough42

2 жыл бұрын

I have the luxury of being able to just point the camera away from my unfinished projects. :)

@UncleKennysPlace

2 жыл бұрын

@@Clough42 I get to trip over them, my subconscious way of reminding myself.

Dang, how many "learn fusion 360" vids have i watched? And here's James, teaching me more about F360 as a side effect of showing us something else than I've ever learned from those vids. School is in muh-fracken session bruh.

@jstro-hobbytech

2 жыл бұрын

He's like the T-1000 of f360. Wow

@jhengineering3578

2 жыл бұрын

man.. This was one of my top most informative vids about fusion 360.

@3Dgifts

Жыл бұрын

No doubt, he's on point.

The nominal content of your videos is excellent, but I learn more from watching you use Fusion 360 than I ever have from all the actual tutorials I've seen. Would love to have a series from you specifically on F360.

I appreciate the way you do these videos... the repetition it GREATLY helping me with the learning curve for Fusion 360.

Your expertise and mastery of Fusion 360 and CAD is mind boggling....What would be fantastic would be a series of teaching vids for those of us that arent so tech savvy on that.....Heck I still have my drafting table stuff still handy and draw my things out by hand......hint hint hint......Pretty Pleaase !!!!!!!!!

@dangerous8333

2 жыл бұрын

Learning software has nothing to do with being tech savvy. It's not as a daunting as you're thinking either. It just means starting with the basics and slowly learn all the settings. Literally anyone can do it. He doesn't seem like the type that has time to show you how to use software. You can go on KZread and watch literally a thousand different how-to videos on the subject.

@srmofoable

2 жыл бұрын

@@dangerous8333 literally by the people who make the software.

@AMATISIG

2 жыл бұрын

@@dangerous8333 Maybe you will need solidworks.

@nominus1138

8 ай бұрын

Dude, that's not mastery or expertise. This was a very simple part. He used it adequately.

@nominus1138

8 ай бұрын

@@AMATISIG solidworks is a joke.

This video really shows how useful a 3D printer is. & Thank-you for showing your Fusion 360 workflow. 👍🏼

@TheTox1cant

Жыл бұрын

I ended up learning how to use a few fusion features out of this video

Glad to see you use the filament I recommended in the last video! Like I said before. I use this particular filament at our R&D lab often and have had great success with it. Wether it’s for strength or durability.

@Clough42

2 жыл бұрын

Thanks for the tip. I've actually had it sitting here for a month or two and finally got around to trying it.

Color me impressed ! You made that look easy. Well done...Very practical use of 3d printing.

Fun project and I love the CAD lessons.

Really love your style of presentation and logical approach!

Every tool is a hammer! Well pleased as always touche!

This is a really good example of functional 3d printing, in a well equip shop, in a multi material assembly.

Awesome job , that's exactly why I like my three D printer, prototyping stuff. Love your projects!

You let me get again my enthusiasm for diy. Thanks for that. Take care and best wishes from Florence Italy

Amazing video about 3D design, printing, materials, and application. I learned a lot in this video!

Hi James, Excellent use of Fusion 360 to model the part and also the CarbonX Carbon-Fiber PETG for the print. Since I don't own a 3D Printer yet, I would have machined some steel bushings and welded them the the 1" square tubing. Many ways to skin this cat. :-) You and the family stay safe.

Outstanding project. Thanks for the video.

Very cool content! I'm not new to 3D modeling, but now that I'm about to retire, 3D printing will become a major hobby. Thanks, man!

I've printed press tube for installing and removing bearing with this stuff. It's amazingly strong. Glad you gave it a go !

This looks so cool! I think you have to go outside the box to create something that can work! I don't get to do that at my job however if there is another way to do it that's what I do! Great work James!

Great video and thanks for the Fusion tips. Learnt so much.

You absolutely nailed the Cura settings. Thank you, i was having trouble

Great job. Learning to love Fusion 360.

Very nicely done! Love that you took us through the Fusion design process instead of just showing the finished part.

@Clough42

2 жыл бұрын

Thanks. I'm really torn on the Fusion content. Some people seem to get a lot out of it, but many others aren't interested.

@dachr2

2 жыл бұрын

@@Clough42 I can see how it might not appeal to the mainstream audience which would explain why most other channels I follow just skip that part of the process. Maybe you could create a separate video with the design process that you could then link to in the main video? Might not be worth it but at least then you have some metrics to go by.

Great vid and thanks for showing how to design it as well!

This video taught me more about Fusion 360 than any tutorial I've ever watched.

lots of good tips here - thank you!

Very few of us can get a 3D print to come out within "half a thou". Impressive. Well done.

Nicely explained...keep it up

Nice job! 👍

Sure made a clean looking print !

Subscribed to see the next part of this video and hopefully some more Fusion 360 educational videos. I get the student version for free, but am new to CAD. I’m specifically looking at printing VESA monitor mounts to free up space on my desk, which is how I found this video to begin with.

Nylon bed adhesion was an issue for me until I found Fillamentum LockPAd sheet. It sticks quite strongly. Previously used only with Fillamentum non-CF nylons, happy results. Will give it a try with Fiberlogy CF Nylon sometime soon. RE: PETGs, Fillamentum has CPE copolymers, one of them has CF. I’ve ordered a sample to try it out. Regular Fillamentum CPE was quite strong and was not as brittle as regular PETG.

Nice video 😊👍

James -- I'd love to hear what you learn about the strength benefit of the CF in this filament, and especially whether that benefit extends across layers as well.

I know you probably didn't mean it to be - but that was like a really damn good lesson on using Fusion 360....

Those carbon filled materials are really nice. I have been printing a lot with both ColorFabb's XT-CF anf FormFutura's CarbonFil (PETG). Those materials are great and prints are not only stiffer than standard PETG but they also look great due to the rough finish the carbon fibers give.

I am a big fan of that CF-PETG and especially for parts in compression.

@joeldriver381

2 жыл бұрын

@@billyzelsnack Yeah- I would have just used normal PETG for that part. Chopped CF makes stiffer parts not stronger parts... I suspect he just wanted to try it out but the stiffer plastic even constrained in the tube may make for less wobble in the monitor.

@Clough42

2 жыл бұрын

Yes and yes. Less wobble, and wanted to try it out.

Great video Thanks

Nice. The Carbon Fiber I got make me itch like crazy when I touched it - ended up using spray lacquer to make it usable. Good job dude.

@Clough42

2 жыл бұрын

Oh, interesting. I haven't experienced that.

Nice design / build James. I dust these types of parts with talc or cornstarch - makes taking them out in the future a lot less dramatic.

Thanks for sharing! I love my 3D printer. Snapmaker 2.0 a350.

Handy tip: you can add parameter in sketch dimension by typing "pluginside=1.005"

@Clough42

2 жыл бұрын

Yeah, I tried it after someone (maybe you?) suggested it. It makes a parameter, but it didn't end up tied to the dimension, so when I changed it later, it didn't affect the sketch. Perhaps I did something wrong.

Great video. Might be a good idea to swap filament and print out of regular PETG to check fit before switching to the good stuff for the final product.

you are so the man!

I’ve had great luck printing pa6-cf from polymaker. I’ve printed some large and many small parts on my ender 3 pro with the microswiss direct drive.

OMG. I was wondering when you were going to lower your extrusion multiplier. Then you pull out the horizontal offset setting. I never tried that! Seems darn handy!! Thank you! I never knew it existed. I'd be tempted to still try your extrusion multiplier. I know sometimes you hit a perfect infill solid density, and want to retain it. My approach was always to adjust extrusion or infill overlap to get part into spec. Shaving some off the walls is a neat trick I never knew until now. Not sure if Cura can manage that. Luckily I mainly use S3D.

@Clough42

2 жыл бұрын

Extrusion multiplier changes other things, like top and bottom layer fill, and they're already just about perfect.

I apologize I should have watched the complete video before commenting. I think the part came out perfect for the application.

Even though 4 cutoff pieces of pipe and a 1" hole in the cap would have worked ... I am super glad you decided to use Fusion, Carbonx PETG... I hope I learned a little more about Fusion and 3D printing... Great job and Thanks for sharing .. Wonderful video ... Be safe

Nice video, keep it up, thank you :)

Well done. It's a very nice part which looked simple to make. The last part is the most discouraging. I know that it just isn't so easy as you make it seem..😄

Looks like a plan. Going to work.

I have a roll of ProtoPasta PLA-CF - seems to be pretty easy to use on the couple sample parts I made.

Just letting you know I quite liked your video. Just a quick comment about holding up your table when you removed the leg... What I do when I need to support something heavy, I take an adjustable clamp (trigger clamp?) and reverse the ends so I use it as a spreader. I've used it to hold up one corner of a 2' x 6' 400 pound table, and with the trigger, I can lift it even higher. thought that might help you in future endeavors. Thanks also for the fusion 360 guide, I enjoy picking up shortcuts and tips.

That looks very nice! I probably would have just used regular PETG, and replaced it if it broke, but let's face it, I don't have a CNC plasma table with touchscreen either 🤷‍♂️ Nice to see that CF PETG is so civilized in its performance. Glad you also showed your regular filament brands, now I have some ideas when my esun runs out and they're out of stock or something. Though honestly I'll need the PLA Pro sooner, that just prints so nice even on a machine originally designed for ABS, just had to bodge in a part fan and leave the lid off.

welldone!

I'm so glad I watched this. For years now, my dumb ass has been converting fractions to decimals when dimensioning in F360. I had no idea that I could just input the fraction. LIFE HACK. Thanks a lot man! I really need to add the THC that I bought nearly a year ago to my LS table and get the gantry leveled out. I've been living with beveled cuts for too long!

FWIW you may want to experiment with PCTG as well. I've print ~10 kg with both PETG-CF (Atomic) and PCTG (Essentium); I find PCTG to have superior impact resistance, but PETG-CF is slightly easier to print (and of course is stiffer). PC-CF is probably my favorite functional material, but I do have a printer with a heated chamber...

Grabbed it with both hands and pushed right down to the bottom hey? No judgement here man That PETG Carbon finish is nice. Trying my first test print at the moment with the same stuff and excited to see how it comes out!

I also like to model something up before I go and make it. I'm more of a fabricator, and work a lot with tubing, similar to what your table and mount is made of. Just a hint for you James, of my process to model tubing pieces. I've found that in most cases, the outside fillet is twice the metal wall thickness. I normally have that as a parameter. Also the extrude have a neat new functionality with the thin extrude. Therefor I scetch my tube outline, with the fillets. Then by using the thin extrude, the tubing comes out completely done. The inside and outside fillets are mostly correct.

@Clough42

2 жыл бұрын

That's a good tip. I'll play with it. I really wish Fusion had proper weldments. You can get by with duplicating, sizing, and splitting bodies, but it's way more work than with a proper weldment system like in SolidWorks.

Good stuff, i used to love carbon fibre petg, until I tried carbon fibre nylon. Easy to print, beautiful finish and STRONGER than any type of filament i have ever used.

@Clough42

2 жыл бұрын

You may have missed my previous video on NylonX.

@BrianSmith-le6uy

2 жыл бұрын

@@Clough42 nope i didn't, i saw them.

I've been printing some Voron parts with Atomic CF-PETG and the parts are incredible! I'm printing with 5 walls and the parts are basically indestructible lol. I tried hitting some failed prints with a hammer for fun and I could only get a couple of parts to snap on thinner parts of them.

Really liked the video. LEarning Fusion and this gave me a good unederstanding of it. Just don't know how to select edges behind walls as it's done hera. How do do that? Tks.

Another great video, thanks! Would you recommend this material over the (nylon?) carbon fiber filament you used on the tungsten grinder fixture?

@Clough42

2 жыл бұрын

Filament choice is always about application. For the things I imagine doing with printed parts, I think the CF-PETG is a better choice just because it prints so much more easily. I haven't tested flexibility for thin walled parts or other properties yet.

Great video,need to teach myself F360 you got the fit perfect! Be a good build to see where you take it from here,and I found a cheaper place to get filament so thx!

Great video James. I was hoping you would test the trial piece to destruction to get a feel for the strength and properties.

@Clough42

2 жыл бұрын

That sounds like something worth doing, but probably as a separate video.

@Bob_Adkins

2 жыл бұрын

@@Clough42 I was thinking of 30 seconds with a hammer, knife, and pliers, but yeah, it could make a nice video.

I'd like to see more information on building the printer . is there a video on it?

good job. I want to learn 360 and get a 3d printer. Keep up the good work.

Love your channel I just bought the same table as yours hay what computer is that that you got for the table thanks again

My first printer was a MakerFarm i2 clone. Good to see some of their products live on...

@Clough42

2 жыл бұрын

This one does, though it doesn't look much like the original. I've got a lot of custom parts on mine.

Hi James this was a great video. Some people just likes to had their tin of fish but ends up to be irrelevant. If i may, can i ask you how do you send the print straight to Simplified 3D. Is there something that i would have to had on Fusion 360? Sorry for my question and again great video in all aspects. Regards Tony.

The outside radius of sq./rect. tubing is twice the wall thickness for steel. Aluminum tubing is usually sharp corners.

As simple as PLA with a 50% infill would already be overkill under compression, but I like seeing fancier filaments in use.

@Exstaz

2 жыл бұрын

I would say that pla would fail over time. PLA have issues with creap, just as nylon does unless you use pa12 nylon.

Its crazy how accurate those machines can print a piece on...

3DXTechd GF-30 ABS would be well suited and is easy to print also. I have printed a bunch of that cf Petg. Small features were always too brittle. The glass fiber does not have that issue and prints equally as easily.

I'm curious about how much fiber is in that filament and the length of those fibers. It could be pretty close to DIY filament winding.

Great video! Have you tried adjusting the extrusion multiplier for this filament instead of changing the part dimensions? Slightly lowering the flow will account for the horizontal expansion (too large outside, hole too small) and once you’ve got that set for a particular filament you should be able to print the part consistently at the exact size every time :)

@Clough42

2 жыл бұрын

The top fill is good. Lowering the extrusion multiplier might fix one problem but would create others.

In this application I'm not sure the CarbonX is really necessary, but it was a nice demonstration of the dimensional accuracy of the material and printer.

Nice ! I never compensate on slider/CAD. I prefer to use calibration models and adjust flow ratio.

@Clough42

2 жыл бұрын

If flow ratio is your problem, that's the right solution. If you already have the flow ratio correct so your top layers are filling properly, it's the wrong tool to adjust perimeters.

me encanta como usas fusion 350

Turned out very nice. I'm a little confused why you adjusted simplify 3d instead of the fusion model though. Looks like fusion is still exporting to STL? 3MF format is the new kid on the block and generally seems to have higher resolution instead of those awkward triangles. Glad to see you try out CF PETG, about to try it out on my next project. Hope your nozzles are no longer brass.

@Clough42

2 жыл бұрын

The model wasn't incorrect--the dimensional error was in the manufacturing process. If I changed the model, then I couldn't give it to someone else because the dimensions would then be wrong for whatever process they were using.

What retraction settings are you using?

This might be a weird approach, but you could potentially cast a spacer in place. A 3D printed plug could be used to adjust the depth. If you want it to be removable, some judicious use of wax and mold release could help it release.

@Clough42

2 жыл бұрын

People accuse me of doing things the hard way, but it never occurred to me to complicate the project by adding resin casting.

1st i want to ask, are those metal spacers inside the sq tube to keep it5 from crushing when the bolts are tightened? If so why not just remove the crush sleeves and weld them into the 1" sq tube then reinstall it in the 2" tube?

Thank you for the video. I would like to purchase this filament and tried following your link. It works but, I’m wondering if you or any of the people reading the comments know how I or you could cause the link to open in the mobile app? It’s much more convenient and probably better for the you to get a little more money.

I have the same Langmuir Table. I noticed a little rust developing in your water table around 3:00. I had the same issue and bought some 'Plasma Green' concentrate to put in the transfer pump powered reservoir I built for below my table (to reuse and store the water) and it has worked wonders. Its a little pricey but combined with the water reservoir recycling the water, a couple of quarts lasts a loooong time. In other news, I love the vids and watch them religiously. Thanks for the content James!

@Clough42

2 жыл бұрын

I'll check it out. I tried borax, and it rusted in the first hour. I drain it when not using it, and I've learned to live with it.

I noticed you set refinement to "high" in your export settings in Fusion. Does this noticeably improve the dimensional accuracy of your prints compared to "medium" ?

@Clough42

2 жыл бұрын

I think it just controls the number of facets on curves. I set it to high many years ago and left it there.

Any reason for using fusion over regular autocad?

Ah yes, I recognized that Makerfarm printer. It's true, Colin got out of the printer business a few years ago. I have a Pegasus, myself and like yours, it's in a state of...ongoing betterment, I guess. It's really only running on the extrusion it was born with (moving to linear rail soon) and the stock bed. It has a new controller, extruder, hot end, etc. I recognize your profile pic from Thingiverse, now that I think about it. I made a few things you have uploaded, so thanks for those nice designs and the great video.

@Clough42

2 жыл бұрын

Mine is pretty much the way it's been for many years. I fixed all the things that annoyed me about it, and now it just works. The laser-cut MDO frame has held up surprisingly well. I expected it to be a source of trouble over time. Perhaps the dry climate and the coat of lacquer are helping.

@jaymzx0

2 жыл бұрын

@@Clough42 It'll probably work fine for quite some time. Composite sheet wood is really stable as far as temperature and humidity goes. When I initially purchased mine I opted to go with the metal components for additional rigidity. I did most of the tinkering years ago. I just got a 'bug' to start tinkering with it again about 6 months ago. Well, it was more of, "I bought those parts 2 years ago. I should get around to putting them together." That whole 'incomplete project' thing and all. Boy, I have a lot of them, too.

Great video. However, as an owner of that same table, I think you may find that post is going to get in your way. I often need to let the material hang over the edges to cut out parts from larger sheets.

@Clough42

2 жыл бұрын

I buy material in 24x36" pieces, and hang them off the other edges.

Solid as a sock.

@Clough42

2 жыл бұрын

The funny thing is: I can't tell is this is an insult, or an autocorrect error.

@richardsweet5068

2 жыл бұрын

@@Clough42 Neither, just British humor.

Do you know anything about the heat resistance of the PETG CF? Glass transition temp?

@Clough42

2 жыл бұрын

Check the technical data sheet. Other than that, I don't know.

Would you share your FFF settings please?

Jusi fill the spacing with epoxy with some stuffing particles instead?

@Clough42

2 жыл бұрын

Sounds messy and permanent.

What do you know about Outdoor use of CarbonX and whether it will degrade in UV exposure?

@Clough42

2 жыл бұрын

Haven't tried it

The mount is surely more rigid than the rest of the table :-) I already noticed in an earlier video that it seems to be a bit shaky when the plasma cutter rapidly changes direction.

@Clough42

2 жыл бұрын

It's on swiveling casters, so it rolls around a little. I suppose I could lock them if I cared.

How are you scrolling around the canvas this smoothly? I'm using the middle mouse button and the orientation cube. But I can never seem to move smoothly as what you're showing here. How do you move the canvas like that?

@Clough42

2 жыл бұрын

SpaceMouse. I usually try to put a link in the video description.

Hey man. I think your shoo is beyond rad but I don't know what you do for a living. Is it custom machined motor parts?

@22:40 So the outside is oversized, and the inside is undersized... Have you checked if a single wall extrusion ( 30x30mm cube in Vase mode ) at like 0.4mm is actually 0.4mm? When I printed parts in CFNylon for the first time I noticed my first parts having had the very same issue you described until I measured the extrusion width and noticed the 0.4mm extrusions being close to 0.6mm wide necessitating a change in the Extrusion Multiplier for that type of filament.

@Clough42

2 жыл бұрын

The extrusion multiplier is fine, or the top and bottom layers would be overfilled. You could fix the outside dimensions by changing it, but you would then mess up solid fills and reduce horizontal bonding strength. Unconstrained edge behavior varies with material, and the most local adjustment that affects the fewest other things is always preferable.

I know this is an old video and you may not see it but I’ll try. I’m curious if you have overall thoughts on “best filament for X projects”? I saw your video about PLA being the strongest and you pointed out that the tests don’t include factors like heat. I’m curious about the carbon fiber aspect and PLA is useless for me when it comes to Mexico heat. In any case, I’m just curious as to your thoughts on filaments.