3D Printing Custom Lights for my Honda Beat using a 3D Scanner
Тәжірибелік нұсқаулар және стиль
After making custom LED tail lights, there were a lot of comments about the reverse lights being red. We listened to you guys and designed a new solution. Thankfully, we recently got the CR-Lizard 3D Scanner and it was the perfect project to test out the scanner and 3D print something really functional.
We're so excited with how the reverse lights came out and they're so bright!
Special thanks to Zbanx for providing the 3D scanner! www.zbanx.com
Download the STL file for the bezels for FREE on our website: imeemade.com/blog/custom-3d-p...
Links to things we used:
Creality CR Scan Lizard
Official store link: store.creality.com/products/c...
Original official store price: $712
Official Store Custom Code: LizBlog (15% off)
Official store arrival price: $605.20
Note: During the official store event, Code cannot be stacked
Amazon store link: amzn.to/3kz7gpp
Amazon original price: $749
Amazon discount code: LizardScan(15%OFF)
Amazon delivery price: $636.65
3M Double Sided Tape: amzn.to/3FT5zKD
Ender 3 3D Printer: amzn.to/3vdW6bQ
LED Lights: amzn.to/3VkKHS9
ASA 3D Printing Filament: amzn.to/3VqACTP
Waterproof wire connectors: amzn.to/3jswPbs
Foot Powder Spray: amzn.to/3WovQYl
Jigsaw blade: amzn.to/3FW7e1R
Deburring tool: amzn.to/3C0dtRc
Get 15% OFF on Starbond CA Glues with our promo code IMEEMADE15
♦ www.starbond.com/?rfsn=462751...
OUR CAMERA GEAR
♦ Sony A6300 - amzn.to/32V8xuz
♦ Sigma 16mm f/1.4 Lens - amzn.to/32Rxh7a
♦ DJI Mic - amzn.to/3hKkFu4
♦ 77” Camera Tripod - amzn.to/2GsLfVq
♦ Glass Cleaning Kit - amzn.to/2Duw4de
MUSIC
♦ www.epidemicsound.com/referra...
FOLLOW US
♦ Instagram: / imee_made
♦ Website: www.imeemade.com
♦ Facebook: / imeemade
The links provided in the description are affiliate links, where we earn a commission on every purchase at no extra cost to you! This helps us to keep the channel going and continue to make projects. Thank you!
Пікірлер: 103
Pro tip: add a switch for them in the cockpit. Great for tailgaters.
@IMEEMADE
Жыл бұрын
Hahahaha yes!!
@the1991ibrahim
Жыл бұрын
That was thinking about
This actually looks better than i expected it to be great job
@IMEEMADE
Жыл бұрын
Thanks!
This was an excellent piece of work, especially with the extra details put in to it for better results in the rear bumper model 👍.
@IMEEMADE
Жыл бұрын
Thank you so much!
Meisters look good! Nice work on the reverse light pods too.
@IMEEMADE
Жыл бұрын
Thank you!
Looks really futuristic and nice.. matches the car great
@IMEEMADE
Жыл бұрын
Thank you!
dude, another mind blowing video here... nice job.
@IMEEMADE
Жыл бұрын
Thank you!
I love these cool car mods! Nice work!
@IMEEMADE
Жыл бұрын
You know what we love. You, Bao, we love you 🥰
@DesignCraftWorkshop
Жыл бұрын
@@IMEEMADE LOL
Rear high beams like a JDM James Bond car. Love it great work!
Fantastic work!
@IMEEMADE
Жыл бұрын
Thanks!
Clever. Very integrated.
@IMEEMADE
Жыл бұрын
Thanks!
Yoooo this is sick! Great job! 🎉
@IMEEMADE
Жыл бұрын
You’re sick
Awesome job!!!
@IMEEMADE
Жыл бұрын
Thank you!
Discovering this channel was a great way to end my night
@IMEEMADE
Жыл бұрын
This is the best comment ever. Thank you!
Looks great and I love the confidence to cut a hole in your car!
@IMEEMADE
Жыл бұрын
Thanks Dave! It definitely helps if the car is already cut up 😅😅
Damn that beat looks dope!!
@IMEEMADE
Жыл бұрын
Thanks!
I love it
@IMEEMADE
Жыл бұрын
Thanks!
enjoyed this vid and the led tail light one got a new sub here
@IMEEMADE
Жыл бұрын
Thanks for watching and subscribing!
Drivers behind this car : "I said, ooh, I’m blinded by the lights"
What a great video i love it
@IMEEMADE
Жыл бұрын
Thanks!
there a 100% was an easier way to do this but it actually looks incredible, worth it
That’s awesome! I would angle them down a little for politeness. After all, you backing up not traveling. Awesome video though. It gave me a few ideas of my own.
@IMEEMADE
Жыл бұрын
Lol yeah you’re right. It’s better to be polite. Thanks for watching!
Great work, i like it. I am considering the CR for under hood scans to make an air box for an LS swap.
@IMEEMADE
Жыл бұрын
That sounds awesome! I would consider the CR-01 over the lizard for large area scans
using the painters tape as markers is a great hack I do it all thje time.. you can even use small torn pieces as it'll make a feature with the shape and easier to clean up ..
@IMEEMADE
Жыл бұрын
Thanks for the tip!
awesome, more vids of the beat please
@IMEEMADE
Жыл бұрын
Coming right up!
Nice
@IMEEMADE
Жыл бұрын
Thanks!
Awesome as always, my friend! When are we going to get a walk-through of your turbo setup? :-D
@IMEEMADE
Жыл бұрын
Eyyy!! Thanks for watching my dude! Soon! That’s next in the list ☺️
Sheeeeeesh
You can use watersoluble paint for marking points. Washes away after and makes scanning much easier
@IMEEMADE
Жыл бұрын
Thanks for the tip! Definitely going to try that next time
@flirtingdisaster
Жыл бұрын
Or just use your cutter to cut lots of tiny crosses. But thats overengineering 🙃
@IMEEMADE
Жыл бұрын
@@flirtingdisaster I actually did try tiny crosses at first but the cr lizard couldn’t keep tracking on that either…. The random patterns seems to be the winner
Looks kinda cool, reverse lights not in taillights are kinda cool. Also, those are some serious reverse lights
@IMEEMADE
Жыл бұрын
Lol have to make sure I can see behind me.
Brilliant process and result. I'm yet to apply to get some scans of my Ep82. Is that an aftermarket Rx7 spoiler? The beat looks amazing 😍 Awesome content bro!
@IMEEMADE
Жыл бұрын
Thanks for watching! It’s a 326 power wing 😅
@DownAtTheUnit
Жыл бұрын
@@IMEEMADE actually love the look of the wing! loving the beat too :D must say always have a softspot for kei cars.. just need to buy myself one
Great video on real world usage of 3D scanner and CAD. That model had a ton of triangles, did it slow your laptop down? Back up bezels look fantastic. Those LEDs are powerful. Mahalo for sharing! : )
@IMEEMADE
Жыл бұрын
Luckily our laptop has a decent graphics card so it didn’t do too bad when modeling. I couldn’t change the mesh to a solid without the laptop crashing though. Looks like we need to build a PC 🤭
@garagemonkeysan
Жыл бұрын
@@IMEEMADE Yeah, like me. Ha. Really, not like me. : )
@franciscojoseramosrodrigue650
Жыл бұрын
How do you export to CAD file?
pls post more on this car 😪 It's so rare to see someone work on a Honda Beat.
@IMEEMADE
Жыл бұрын
Will do!
Great Job! I just recently purchased the same scanner. Would you be willing to show a little more about how you importanted the scan into Fusion 360 and used it to design?
@IMEEMADE
Жыл бұрын
Absolutely, we have a small write up on our website about the process. I can definitely add more detail regarding the fusion 360 portion!
hey bro, dry shampoo works great too for scanning!
@IMEEMADE
Жыл бұрын
Thanks for the tip!
Can you explain in more detail about processing the scan and design? Feel like that is the most difficult part
@IMEEMADE
Ай бұрын
Absolutely! Lmk if you have any object in particular you would like me to design
Please let me know ..wich program did you used with the scanner?😊
can deodorant works to also you can use petg plastic for outdoor on cars won’t melt and can sand really well
can you tell me please , what software do you use to edit the result from scaner ? thank you
Did the same thing on my car a year ago cuz i lived in a forest with no lights.... sept i just mounted an led fog light under the bumper and ran it to a relay and spliced it in to the reverse circuit, of course it wont pass inspection with that light on it 🙃, so inwas forced to take it off... the plan is to do something like this but ona civic heh.
@IMEEMADE
Жыл бұрын
Awesome!
Would using a LIDAR sensor on the iPhone be a good substitute for the 3D scanner?
@IMEEMADE
Жыл бұрын
Not a bad substitute. Using polycam you can get a decent enough scan but it won’t be as accurate
How did you make it switch on when selecting reverse
@IMEEMADE
Ай бұрын
I wired it to the factory reverse light wire
can deodorant works too
How you managed to print it with ASA on that ender?? :)
@IMEEMADE
Жыл бұрын
Temperature is at the upper limit of the hot end and it took a few tries, but it works!
@kubabeemwu6258
Жыл бұрын
@@IMEEMADE what filament did You use? ;)
@IMEEMADE
Жыл бұрын
There’s a link to the filament we used in the description
You have a Honda Beat and it isn’t a feature piece of your channel????
@IMEEMADE
Жыл бұрын
Didn’t think it was cool enough 😅
@Kapil-Patel
Жыл бұрын
@@IMEEMADE 😪
If your one of those guys where some words interest you enough to make you research them then you'll understand why i did this, I searched what gaping hole was, went to images and was like "Not what i thought i'd see" and clicked off lmao. (7:50)
@IMEEMADE
Жыл бұрын
Hahahaha, oh man....
Hey my car have lights in red which is illegal. So I created lights just like in the front of a car, making illegal white lights. This is still not up to law in any country.
@IMEEMADE
11 ай бұрын
I don’t think you really know
Ni de video
@IMEEMADE
Жыл бұрын
Que?
@leonardoa9155
Жыл бұрын
Nice video, autocorrector 🥲
@IMEEMADE
Жыл бұрын
@@leonardoa9155 ☺ Thank you!
please, do not add music if possible. voiceover is excellent .
@IMEEMADE
Жыл бұрын
Noted
Could you do an in depth video of the process taking scan data and from that making the housing on fusion, i usually use creo, and it wont let me import an open mesh 🥲