Wahh... Bagus banget👍

@Mr.RC-Creator

Жыл бұрын

Thanks.😁

hope you see this but can you tell me where you got the shaft and coupler?

@Mr.RC-Creator

Ай бұрын

th.aliexpress.com/item/2251832754435647.html?spm=a2g0o.productlist.main.5.32d3TzuZTzuZbz&algo_pvid=05318163-eb7c-490c-ba1e-649ce8db6f4a&algo_exp_id=05318163-eb7c-490c-ba1e-649ce8db6f4a-2&pdp_npi=4%40dis%21USD%215.95%214.46%21%21%215.95%214.46%21%402103085c17186046760617711eab6e%2166582458376%21sea%21US%21173671390%21&curPageLogUid=BtATQ8aDPjeh&utparam-url=scene%3Asearch%7Cquery_from%3A th.aliexpress.com/item/3256801305009792.html?spm=a2g0o.productlist.main.37.32d3TzuZTzuZbz&algo_pvid=05318163-eb7c-490c-ba1e-649ce8db6f4a&algo_exp_id=05318163-eb7c-490c-ba1e-649ce8db6f4a-18&pdp_npi=4%40dis%21USD%215.89%215.60%21%21%215.89%215.60%21%402103085c17186046760617711eab6e%2112000016330455606%21sea%21US%21173671390%21&curPageLogUid=i3qohRmaMTLr&utparam-url=scene%3Asearch%7Cquery_from%3A th.aliexpress.com/item/3256806675485980.html?spm=a2g0o.detail.pcDetailBottomMoreOtherSeller.22.6435GSdXGSdXu3&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40050.354490.0&scm_id=1007.40050.354490.0&scm-url=1007.40050.354490.0&pvid=5f55d28c-27fb-438b-9b83-f2ed72a6308c&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.40050.354490.0,pvid:5f55d28c-27fb-438b-9b83-f2ed72a6308c,tpp_buckets:668%232846%238109%231935&pdp_npi=4%40dis%21USD%211.49%211.49%21%21%2110.77%2110.77%21%402101584517186047980984594e58e8%2112000038547818462%21rec%21US%21173671390%21&utparam-url=scene%3ApcDetailBottomMoreOtherSeller%7Cquery_from%3A

hey thank you for the video its great! how did you installed the Bearings and SHaft and what did you use to make it waterproof? I am new to boat stuff so i am not sure. My inital Idea was to use 2 x 2-RS Bearings with the shaft, but i am not sure if this is already enough?

@Mr.RC-Creator

2 жыл бұрын

I put some white grease on the shaft after the bottom of the hull.

I am currently printing this I plan on using my spare traxxas 1/16 power system vxl 3m and 380 brushless motor, the motor measures 2848 and is 4000 kv

@Mr.RC-Creator

2 жыл бұрын

You can use Traxxas 1/16 parts, I think it works.😁

Great video but you left out installing the prop shaft and everything else that goes along with it. One of the most important things to make the jet boat go and work properly. I figured it out but the way the prop is printed out looks backwards. Sorry for the negative comment but I'm sure others would also feel that you left the most important part out.

@Mr.RC-Creator

2 жыл бұрын

Hi.Dragonconley Yeah, I think it's gone too.😅

@dragonconley44

2 жыл бұрын

@@Mr.RC-Creator also left out the water cooling which is different from the boat that I printed out. I tested my boat last night I’m my pool and it’s going to be a ripper other than it overheated a couple times because I don’t have any water cooling setup yet. It’s still needs to be sanded and made waterproof but it’s the small things that I still need to do.

@keybrent64

2 жыл бұрын

@@dragonconley44 What are the dimensions on the prop shaft size? I think I've seen a link for every part but that lol. That's the missing piece I need to finish my boat

@dragonconley44

2 жыл бұрын

@@keybrent64 I will find it and send you the link.

That's awesome. What 3D printer did you use?

@Mr.RC-Creator

Жыл бұрын

I use 3D printer BIQU B1.🙂

Hey I hope you'll still reply to comments, where did you find those nutserts your heating and placing in the screw holes? I like that idea I assume that would be stronger than just threading the screws straight into plastic.

@Mr.RC-Creator

2 жыл бұрын

Hey I used a PCB to support the mounting bracket to prevent the plastic from softening when it gets hot.🙂

Ohhh Boy!! Pretty slick on the design . Whats the total cost on this ? Inclusive for parts and motor?

@Mr.RC-Creator

2 жыл бұрын

Hi. You can buy it by following the link. www.aliexpress.com/item/1005002395921310.html?spm=a2g0o.productlist.0.0.677671f1bc66fm&algo_pvid=f0fc7e6a-a021-455f-b68a-9be004b89843&algo_exp_id=f0fc7e6a-a021-455f-b68a-9be004b89843-8&pdp_ext_f=%7B%22sku_id%22%3A%2212000020510007646%22%7D&pdp_pi=-1%3B36.92%3B-1%3B291%40salePrice%3BUSD%3Bsearch-mainSearch www.aliexpress.com/item/32760616516.html?spm=a2g0o.productlist.0.0.35024615MnIpWz&algo_pvid=d9ebf978-14b2-4b32-a656-958583d42ae6&algo_exp_id=d9ebf978-14b2-4b32-a656-958583d42ae6-2&pdp_ext_f=%7B%22sku_id%22%3A%2262050185408%22%7D&pdp_pi=-1%3B32.99%3B-1%3B-1%40salePrice%3BUSD%3Bsearch-mainSearch www.aliexpress.com/item/1005001943578133.html?spm=a2g0o.productlist.0.0.41625a98pxK6EL&algo_pvid=fa54fb48-8660-40ee-84f1-9a3d678e8e75&algo_exp_id=fa54fb48-8660-40ee-84f1-9a3d678e8e75-7&pdp_ext_f=%7B%22sku_id%22%3A%2212000018177977674%22%7D&pdp_pi=-1%3B9.17%3B-1%3B-1%40salePrice%3BUSD%3Bsearch-mainSearch

Hi, very well designed project, How many 1 Kg of PLA+ spools are required for all 3D printed parts? you have written on video description as 3-4 but I need the exact kg of PLA+ needed before ordering filament Thank you.

@Mr.RC-Creator

6 ай бұрын

Thanks a lot! Approximately 2 rolls of PLA+ filament

Bicarbonate de soude + colle cyanoacrylate= plastique super dur et ponçage,

@Mr.RC-Creator

2 жыл бұрын

👌😁

did anyone have problems with the pieces not fitting properly when trying to assemble the hull?

@Tdubplayz

6 ай бұрын

I’m having trouble did you ever get it on?

@Mr.RC-Creator

6 ай бұрын

Where are you having problems? Please tell me your problems.

@Tdubplayz

6 ай бұрын

@@Mr.RC-Creator whenever you put the backpiece in the piece that connects to the backpiece it has a lot of problems and I had to spend about 30 minutes shaving it down with a knife to the perfect size

@Mr.RC-Creator

6 ай бұрын

@@Tdubplayz Perdón por mi tardía respuesta. Eres muy talentoso y maravilloso al poder resolver esos problemas.🙂

@Tdubplayz

6 ай бұрын

Thank you😊❤

PLA is very permeable. How do you solve this?...thank and great video

@Mr.RC-Creator

2 жыл бұрын

Hi.Fernando V Thank you so much.😁 I coat it with clear spray.

Nice boat design. Poor build instructions pertaining to the drive shaft and cooling. I see parts list provided by creator and others which vary. As an example 10x4 bearing. Someone else says 9x4 bearing. After printing I measure bearing seat and get 8mm. The drive shaft tube for the 4mm shaft is 9mm in diameter. How does that fit a 8mm hole. My printer is the bambu X1C so it's very accurate. I understand the inlet water cooling off the prop housing and then the outlet further back on the prop housing. So why in the video was there an hole drilled in back along with 2 on the side haul? Confusing.

@Mr.RC-Creator

10 ай бұрын

Thanks!! You can do this if you have the required parts. And printers have many different error values. and you can drain the water as needed. The other 2 holes in the back I made as a reserve.🙂

I'm going to try it. Any links for where you bought the hardware? Drive shafts, rivnuts.... Thanks

@Mr.RC-Creator

7 ай бұрын

th.aliexpress.com/item/33047616164.html?spm=a2g0o.detail.1000014.39.696883TP83TPDn&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40050.362094.0&scm_id=1007.40050.362094.0&scm-url=1007.40050.362094.0&pvid=61b83da7-3c39-4853-aa3d-c55a90998229&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.40050.362094.0,pvid:61b83da7-3c39-4853-aa3d-c55a90998229,tpp_buckets:668%232846%238115%232000&pdp_npi=4%40dis%21THB%2155.96%2141.97%21%21%211.60%21%21%402101c5b117029660616465015eff17%2167421173719%21rec%21TH%21173671390%21 th.aliexpress.com/item/32934303589.html?spm=a2g0o.productlist.0.0.372352b5npeY9O&algo_pvid=46c1fc5d-8e54-4de1-a4bf-158b1c434ef0&algo_exp_id=46c1fc5d-8e54-4de1-a4bf-158b1c434ef0-0&pdp_ext_f=%7B%22sku_id%22%3A%2266132994816%22%7D&pdp_npi=2%40dis%21USD%21%213.96%21%21%21%21%21%402103399116539077670891060e7c93%2166132994816%21sea

Other than the water cooling holes and the air lock hole have you altered this in any way from bashtecs design I'm asking coz I've started printing bashtecs design and bought bearings etc and would like to print the rear part of the hull from your design ?

@Mr.RC-Creator

11 ай бұрын

No, I don't change this from bashtecs design.

Hey, do you remember the print settings, I'm tempted to print at 100% infill, but maybe 3 layers of perimeters and 20% infill is enough?

@Mr.RC-Creator

Жыл бұрын

I don't remember, infill it's not 100%

@chimonoki2868

7 ай бұрын

Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 10-15 Filament brand: esun Filament color: Orange Filament material: PLA

@Mr.RC-Creator

7 ай бұрын

I agree with you!!

Great build , i got u used the water inlet from the end of jet tunnel to cool the esc,motor inline,, what what is the purpose of the water inlet on top of the tunnel as it is not clear where the pipe route go

@Mr.RC-Creator

2 жыл бұрын

Hi.Mahmoud Water inlet at the top of the tunnel I use grease to lubricate the shaft and prevent water from entering the bearings.😁

@mahmoudsaad271

2 жыл бұрын

Thanks for ur reply , so u added two bearing to the drive shaft ? And what size of these bearing ?

@Mr.RC-Creator

2 жыл бұрын

@@mahmoudsaad271 Bearing size 9x4x9🙂

Hi. Fantastic channel!!. Im trying to build mine. Could you tell me witch Shaft did you usé? Thanks thanks thanks!! Love your builds!!

@Mr.RC-Creator

2 жыл бұрын

Hi. So you asked me, you mean the shaft of the boat, right? I use Drive shaft stanless 3mm, length 17cm.

@MrJavitominicooper

2 жыл бұрын

@@Mr.RC-Creator thank you so much! I only find 15 or 17 cm Shaft. 😞

@Mr.RC-Creator

2 жыл бұрын

@@MrJavitominicooper I believe you can do it.🙂

Hi. Do you have the full hardware part list ? Especially bearings and others parts that we are not seeing on the video please ? Also, do you tried it with a 3S battery ?

@Mr.RC-Creator

2 жыл бұрын

Hi.Bro! Yes. I uesing 3s www.thingiverse.com/thing:5424311/files

How did you secure the propellor to the shaft? And did the shaft go through the prop and terminate in the back bearing in the stator?

@Mr.RC-Creator

2 жыл бұрын

Hi.matthwy1 You can use Drive Dog the same size as the shaft. Yes, there is a locking bearing behind the axle.🙂

What distance does it travel before the battery runs out?

@Mr.RC-Creator

2 жыл бұрын

5-8 minutes to play

How does the drive system work? And what parts are needed?

@Mr.RC-Creator

2 жыл бұрын

Hi. FreefallFVP follow link www.boat-ed.com/wisconsinrental/studyGuide/Jet-Drives/103051_55511/ the main components motor, drive shaft, propeller and streeing nozzle.

Hello, whats the brass fitting and clear hose for right behind the motor and that small screw?

@Mr.RC-Creator

Жыл бұрын

@B Kumler Brass fittings and clear pipes reserved drain pipe. Small screw, close the water pipe.

Can the boat propeller be bought?

@Mr.RC-Creator

Жыл бұрын

You can download it from this link. www.thingiverse.com/thing:542...

im wondering if that is the top speed? could you go faster in a larger pond, if not then what kv rating would you recommend for a faster boat?

@Mr.RC-Creator

Жыл бұрын

This can be faster, I use 50% throttle for the clip 😀

@ohladthekewlkid1467

Жыл бұрын

@@Mr.RC-Creator thank you

@ohladthekewlkid1467

Жыл бұрын

@@Mr.RC-Creator ima build this

@Mr.RC-Creator

Жыл бұрын

@@ohladthekewlkid1467 Have a good time.😁

This is incredible build and yet a simple/effective design. Can you share the 3D models?

@Mr.RC-Creator

2 жыл бұрын

you can do this from the link above.

@justinjanes3361

2 жыл бұрын

@@Mr.RC-Creator the edits you did with the files are not available is there any way you can share your remix on thingiverse so others can enjoy the water cooling aspect. also for the water cooling is the pump nessessary?

@Mr.RC-Creator

2 жыл бұрын

@@justinjanes3361 I have not altered the original file, I am ready to help you.🙂

@justinjanes3361

2 жыл бұрын

Ok because I just finished printing the file that was up on thingiverse and there is no deed spots like what was done for the water cooling in and out of the jet tunnel. The shape is different, the holes in the screw inserts are larger on both the body and the steering nozzle. Just a number of things I noticed that were different that’s why I asked if you have edited the files. I used the link that was provided for the files…. I also am curious about your water cooling pump.

@Mr.RC-Creator

2 жыл бұрын

@@justinjanes3361 I understand the problem, you can drill a water-cooled inlet hole from the jet tunnel to cool the speed regulator as well by drilling it in line with the area where the impeller rotates so that the pressure from the impeller pushes the water out. www.aliexpress.com/item/1005002635958696.html?spm=a2g0o.detail.1000023.15.12667b5eQ8h7eV

What type of screws and nuts did you use?

@Mr.RC-Creator

6 ай бұрын

Sorry for my late reply I use M3 Stainless Steel Hexagon Hex Socket Screw 😁 www.aliexpress.us/item/3256806157900927.html?spm=a2g0o.productlist.main.23.1bd31dadlIAjte&algo_pvid=0feb8407-78f6-4801-a2c7-286fe6488624&algo_exp_id=0feb8407-78f6-4801-a2c7-286fe6488624-11&pdp_npi=4%40dis%21USD%213.19%211.69%21%21%2122.70%21%21%402103225217047148847791170ed79e%2112000036843204582%21sea%21US%21173671390%21&curPageLogUid=j5gTTuPRW9Ew

Thanks for your last reply. Do you ever have problems with airlock?

@Mr.RC-Creator

Жыл бұрын

Not at all,🙂

@Mr.RC-Creator

Жыл бұрын

@bkumler You have a problem with that?

@bkumler

Жыл бұрын

Yes, when I was running it last week on the ocean, I did. I thought that brass fitting and tube was away to prevent that, allowing the air escape.

@Mr.RC-Creator

Жыл бұрын

​@@bkumler Ah, I see. I thought.🙂

Nice boat, i print this boat also. At the moment, i am searching to the shaft? I don not find the right size. Have you an tip for me?

@Mr.RC-Creator

2 жыл бұрын

Hi.Sebasian Thank you!! i use a 4 mm shaft, 4 mm shaft coupling and the motor shaft size is the same 4 mm.

@dragonconley44

2 жыл бұрын

I used a 150mm by 4mm shaft and I ended up having to cut it down about 5mm but you probably figured it out by now but if not you can buy them on Amazon.

@Mr.RC-Creator

2 жыл бұрын

@@dragonconley44 Thanks.🙂

Where the top hole (for the tube) is conected? I understand that the one in the back is providing water for the watercooling with an outlet on the side but what does the one on the top do?

@Mr.RC-Creator

9 ай бұрын

The top hole is for grease and lubricant for the drive shaft and bearings. (For pipes) worn to prevent water pressure from flowing in.

@TheAntricos

9 ай бұрын

@@Mr.RC-Creator I got that one, I am asking about the other one the big hole behind the small for the grease.

@Mr.RC-Creator

9 ай бұрын

@@TheAntricos It is the water inlet pipe for cooling.

@TheAntricos

9 ай бұрын

@@Mr.RC-Creator So it has 2 water inlets? One there and one in the back near the propeller? Also thank you for taking the time to reply!

@Mr.RC-Creator

9 ай бұрын

Yeah.!!😁

Could you put a sketch of the water cooling, I don't quite understand how it works?

@Mr.RC-Creator

Жыл бұрын

Water will enter through the drive pipe. and send it to speed controller and finally the motor.

Hi! Ken you tel me please from where did you get the connectors for cooling tubs and what glue use ?. Thank you!

@Mr.RC-Creator

8 ай бұрын

Sorry for the late reply. th.aliexpress.com/item/1005003958009739.html?spm=a2g0o.detail.1000014.23.5622DKxtDKxtIf&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40050.362094.0&scm_id=1007.40050.362094.0&scm-url=1007.40050.362094.0&pvid=58cf09be-eb1a-48f2-9937-ef64f07f37df&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.40050.362094.0,pvid:58cf09be-eb1a-48f2-9937-ef64f07f37df,tpp_buckets:668%232846%238110%231995&pdp_npi=4%40dis%21THB%2198.11%2151.86%21%21%212.80%21%21%402101c5a717017767177161700e0ca3%2112000027568323828%21rec%21TH%21173671390%21 th.aliexpress.com/item/1005005073643814.html?spm=a2g0o.detail.0.0.67dcu5CBu5CB2W&gps-id=pcDetailTopMoreOtherSeller&scm=1007.40050.362094.0&scm_id=1007.40050.362094.0&scm-url=1007.40050.362094.0&pvid=8059653c-84c9-4510-a410-307ac2395747&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.40050.362094.0,pvid:8059653c-84c9-4510-a410-307ac2395747,tpp_buckets:668%232846%238110%231995&pdp_npi=4%40dis%21THB%21106.91%2164.15%21%21%2121.70%21%21%402101c5a717017767055421556e0ca3%2112000031532716499%21rec%21TH%21173671390%21

And the length of the metal transmission tube?

@Mr.RC-Creator

Жыл бұрын

D4mm, L150-200 mm🙂

How is your cooling water route?

@Mr.RC-Creator

2 жыл бұрын

Hi. you watch the video minutes 3:00 -3:25

Hello Great work! I would just like to know where the pipe goes from the water inlet at the top of the tunnel? I really can't see in the video Thanks a lot

@Mr.RC-Creator

Жыл бұрын

Hi.Thanks water pipe out to the back.

@ingetys

Жыл бұрын

@@Mr.RC-Creator Hi, Thanks for your quick answer :-) And what is this water circuit for?

@Mr.RC-Creator

Жыл бұрын

@@ingetys I made it to prevent water pressure. You can turn it off.🙂

@ingetys

Жыл бұрын

@@Mr.RC-Creator ok got it Thanks !

Hello, I want to make a boat like yours, but I don't know what materials to use. Could you send me a list with all the materials?

@Mr.RC-Creator

Жыл бұрын

Sorry for my rate reply. Required Material PLA+ ballbearing 10*4 2 Drive shaft 4mm Cooling nozzl M5 Water Cooling Silicone Tube 2 Rubber Bellows Seals Pipe Fitting Connector Water 6mm Havefan.!!! ☺️

hello, I'm a little lost for the motor axis. I don't know anything about RC boat. Do you have the reference or a URL to buy the correct motor shaft? Thank you

@Mr.RC-Creator

2 жыл бұрын

Hi.Mike follow this link th.aliexpress.com/item/32934303589.html?spm=a2g0o.productlist.0.0.372352b5npeY9O&algo_pvid=46c1fc5d-8e54-4de1-a4bf-158b1c434ef0&algo_exp_id=46c1fc5d-8e54-4de1-a4bf-158b1c434ef0-0&pdp_ext_f=%7B%22sku_id%22%3A%2266132994816%22%7D&pdp_npi=2%40dis%21USD%21%213.96%21%21%21%21%21%402103399116539077670891060e7c93%2166132994816%21sea

@MikelaMenace

2 жыл бұрын

@@Mr.RC-Creator thx :) !

@MikelaMenace

2 жыл бұрын

@@Mr.RC-Creator this version it's ok ? Length L15cm H10cm ?

@Mr.RC-Creator

2 жыл бұрын

@@MikelaMenace Is it the hull? I thought it was small but it could be done.

Hi, Do You have any link to shaft ? Any dimensions of it ? :)

@Mr.RC-Creator

Жыл бұрын

www.amazon.com/Fielect-Shaft-Assembly-Propeller-Universal/dp/B083NY6MBQ/ref=sr_1_1_sspa?crid=A4R0YXX5BK7E&keywords=drive%2Bshaft%2B5mm&qid=1660652565&sprefix=drive%2Bshalf%2B5mm%2Caps%2C305&sr=8-1-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzQ1pCM1hSNzhXVzZFJmVuY3J5cHRlZElkPUEwMTgyOTI4MUtZQkMwU1NBVFFCRiZlbmNyeXB0ZWRBZElkPUEwNDM2NDcxM1BSRUdZVkE4MEdDQiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU&th=1 D 5mm, L150-200 mm🙂

where did you get the bent servo push arm lol,

@Mr.RC-Creator

2 жыл бұрын

You mean servo arm, right?🙂

@ChampTruex

2 жыл бұрын

@@Mr.RC-Creator yeah

@Mr.RC-Creator

2 жыл бұрын

@@ChampTruex It comes with servos.

Petg.abs or pla?

@Mr.RC-Creator

2 жыл бұрын

PLA+.

can you please give me links for the parts like motor and the melt in things and bolts

@Mr.RC-Creator

2 жыл бұрын

Hi. Pandus dog www.aliexpress.com/item/32968483467.html?spm=a2g0o.detail.1000014.5.1c97100631A8we&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40050.274735.0&scm_id=1007.40050.274735.0&scm-url=1007.40050.274735.0&pvid=5edc1d2f-fac5-4597-9995-81552b6bea17&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.40050.274735.0,pvid:5edc1d2f-fac5-4597-9995-81552b6bea17,tpp_buckets:668%232846%238115%232000&pdp_ext_f=%257B%2522sku_id%2522%253A%252266641140822%2522%252C%2522sceneId%2522%253A%252230050%2522%257D&pdp_pi=-1%253B0.8%253B-1%253B-1%2540salePrice%253BUSD%253Brecommend-recommend th.aliexpress.com/item/32760616516.html?gatewayAdapt=glo2tha&spm=a2g0o.productlist.0.0.35024615MnIpWz&algo_pvid=d9ebf978-14b2-4b32-a656-958583d42ae6&algo_exp_id=d9ebf978-14b2-4b32-a656-958583d42ae6-2&pdp_ext_f=%7B%22sku_id%22%3A%2262050185408%22%7D&pdp_pi=-1%3B32.99%3B-1%3B-1%40salePrice%3BUSD%3Bsearch-mainSearch th.aliexpress.com/item/32765780418.html?spm=a2g0o.productlist.0.0.c5a051e0SmDGck&algo_pvid=b8fcd65c-9ec6-4dab-b4bd-7bbe94c7e263&algo_exp_id=b8fcd65c-9ec6-4dab-b4bd-7bbe94c7e263-10&pdp_ext_f=%7B%22sku_id%22%3A%2262203030842%22%7D&pdp_pi=-1%3B1.04%3B-1%3B-1%40salePrice%3BUSD%3Bsearch-mainSearch th.aliexpress.com/item/32614416689.html?spm=a2g0o.productlist.0.0.14f15347WpyFNf&algo_pvid=7614b66d-b76b-4626-b1f8-6e8ec12113dc&algo_exp_id=7614b66d-b76b-4626-b1f8-6e8ec12113dc-17&pdp_ext_f=%7B%22sku_id%22%3A%2265516808801%22%7D&pdp_pi=-1%3B1.33%3B-1%3B-1%40salePrice%3BUSD%3Bsearch-mainSearch

@pandusdog6307

2 жыл бұрын

@@Mr.RC-Creator thank you

Hello Sir I am a student From india i am see your this video (Wiper Moter as a servo.)and i have some small Queshion in that can you please please help me to give the answers...??

@Mr.RC-Creator

7 ай бұрын

Sure, I will definitely recommend it to you.

@ganeshpingle.8423

7 ай бұрын

thank you sir can you please give me your contact so that I contact you to give my answers..@@Mr.RC-Creator

Does it work with 14.8v?

@Mr.RC-Creator

Жыл бұрын

sure can use.

Could you put the link of the motor transmission?

@Mr.RC-Creator

Жыл бұрын

THB 110.55 20%OFF | 10/13/15/20/25/30/35cm Length Stainless Steel Tube Spare Parts 4mm Stainless Steel Shaft Suitable For RC Electric Racing Boat a.aliexpress.com/_mLeRawm THB 1,025.34 51%OFF | Rocket-RC 2948 2958 2968 3400KV 3450KV 3800KV 4800KV Motor with Water Cooling Jacket for 600-800mm RC Boat a.aliexpress.com/_mqNtq6q

what size bearing and what size shaft

@Mr.RC-Creator

Жыл бұрын

Bearing 4x4x9 shaft drive 4mm.😊

what are the dimensions of the bearings you used

@Mr.RC-Creator

17 күн бұрын

If I remember correctly 9*4*9 🙂

Are you willing to share the file for the printer?

@Mr.RC-Creator

2 жыл бұрын

Hi. Jakob Link 😁www.thingiverse.com/thing:5424311/files

What size is the motor transmission?

@Mr.RC-Creator

Жыл бұрын

2968 / 3200-3400KV

Puedes compartir el STL?

@Mr.RC-Creator

2 жыл бұрын

I have a link on the top

Which dimension shaft are used for propeller ..?

@Mr.RC-Creator

10 ай бұрын

Drive shaft 4mm

@KK3DTechnology

10 ай бұрын

@@Mr.RC-Creator and length

@Mr.RC-Creator

10 ай бұрын

length 150cm

@KK3DTechnology

10 ай бұрын

@@Mr.RC-Creator thank you sir

Que medida son los rodamientos del eje

@Mr.RC-Creator

Жыл бұрын

2 rodamientos de bolas de acero inoxidable para eje delantero y eje central 9x4x4.😁

What is a Battery LiPo SS?

@Mr.RC-Creator

2 жыл бұрын

3S 2200mah.

What voltage is the battery?

@Mr.RC-Creator

Жыл бұрын

11.1volt

@sergiosanchez_09

Жыл бұрын

Thanks

STL files please..

@Mr.RC-Creator

Жыл бұрын

Link www.thingiverse.com/thing:5424311/files Have fun. 😁