3D Printed RC Boat Vanguard Marine Sea Rescue
Тәжірибелік нұсқаулар және стиль
Spec. Vanguard Marine Sea Rescue
Hull 50cm
ESC waterproof 40a
Motor 2215 3200kv
Battery 2S Lipo 850-1000mha
Tx Futaba 3pv
Rx 4ch Corona s-fhss
Servo MG 9g
Prop FT009
Drive Shaft FT011
STL file www.thingiverse.com/thing:546...
Please subscribe to our youtube channel / @mr.rc-creator
Пікірлер: 101
1:59 when the soldering fumes kick in
Отличное творчество Скачал тоже модель
This boat looks beautiful! Great work and thanks for sharing. Very nice and cool 😎👍🏻👍🏻👍🏻
@Mr.RC-Creator
2 ай бұрын
Thank you very much.!
Super gemacht *****
@Mr.RC-Creator
4 ай бұрын
Thanks.! 😊
Saludos y felicitaciones excelente proyecto , buen negocio fabricar piezas y tu propia lancha
@Mr.RC-Creator
Жыл бұрын
@Julian Orozco Thank you so much!!😁
Dang you went all out on this unit heck yeah!!
@Mr.RC-Creator
2 жыл бұрын
I do it because I like.🙂
Nice boat.
@Mr.RC-Creator
Жыл бұрын
Thank you so much. 😊
Nice build, I like all the details you put in! Also, good idea to put some carbon laminate at the seam. Cheers!
@Mr.RC-Creator
Жыл бұрын
Thank you.!!!!
Got the same printer. Thing works great
@Mr.RC-Creator
7 ай бұрын
Thanks a lot!😁
Awesome boat man!
@Mr.RC-Creator
Жыл бұрын
Thanks!😊
Excelente, saludos desde Chile
@Mr.RC-Creator
8 ай бұрын
Muchas gracias😁
On the video shows it in two sections, the file is one large boat)))
6 un genio
Thank you so much.
ติดตามพี่เลยครับ
@Mr.RC-Creator
2 жыл бұрын
ขอบคุณครับ ^ ^
bravo
@Mr.RC-Creator
Жыл бұрын
Thanks!!😁
First, you did an amazing job on the design and on the build. The boat looks incredible. I'm curious, I see that you've said to sake the outboards to match the hull size. What percentage would they be scaled down to if I printed the hull in the size the files are already? I cant think of how to get the proportion right without trial and error and a lot of wasted prints.
@Mr.RC-Creator
10 ай бұрын
Yeah..!! You can print it now.
@poomwahboogins
10 ай бұрын
I know I can print it now, but what percentage is the hull compared to the motor ?@@Mr.RC-Creator
@Mr.RC-Creator
10 ай бұрын
@@poomwahboogins 65 percentage
@poomwahboogins
10 ай бұрын
Excellent. Thank you!
In the thingiverse file comments you recommend scaling down the motors to fit the hull. what if I want to scale up the hull to fit the motors? what scale factor would you recommend? I am using Cura 5.0 and plan on powering with the outboards not an inboard like in the Video.
@Mr.RC-Creator
Жыл бұрын
You have to arrange all the files together as a body and expand the body to fit the motors in your cura 5.0 program.
please put the outboard on this. or better yet, make another one and add 2.
@Mr.RC-Creator
Жыл бұрын
Thanks!
very cool, is this your own design?
@Mr.RC-Creator
2 жыл бұрын
Hi.Norse B Thanks yes i like it🙂
I like it an printed one. Files are good and there were no problems. Exept the first drive. Could you tell me your print resulutions? Thickness of the Hull and Infill? I think my boat is a little bit heavy.
@Mr.RC-Creator
Жыл бұрын
@Patrick S resulutions 0.2 / Thickness 0.8-1.2 /Hull and Infill 0/ Wall 3 🙂 Reply
Not bad
@Mr.RC-Creator
2 жыл бұрын
Thanks.
I really like it and would love to print it, but the print files sadly are totally out of dimensions to each other. Maybe the hull is correct, the chirs, crossbars are too small, the two engines are too big....You think there is a way to make the files again? Or would it be possible to get the CAD files and I would help out. Many Thanks
@Mr.RC-Creator
Жыл бұрын
@trenspoke1 You can resize the file in the program to suit your needs before printing.
hello! i am about to print this boat, is the haul printed WITH support???????? the thingaverse file says no but in the video i see you added support to print the haul properly
@Mr.RC-Creator
Жыл бұрын
I don't remember but you can resize it.
do you have the files posted anywhere other than thingiverse? There seems to be a lot of stuff in the video that isn't in the files.
@Mr.RC-Creator
9 ай бұрын
Link.www.thingiverse.com/thing:5461389
Do you have the STL files for the motor steering brackets?
@Mr.RC-Creator
Жыл бұрын
Let me see.🙂
Das Boot würde mir auch sehr gut gefallen. Was würde das den kosten wenn Du es nochmal machen würdest? Gruß Frank
@Mr.RC-Creator
4 ай бұрын
Hallo Frank Ich stehe nicht zum Verkauf, tut mir leid, vielen Dank für Ihr Interesse.🙂
file is missing parts ?!
Hey there downloaded the file for the boat. On the video shows it in two sections, the file is one large boat, could you upload the version as in the video in two sections? Also in the video the back is flat where the outboard mounts, can you also fix that on the thingverse file? Thanks!
@Mr.RC-Creator
Жыл бұрын
Try again, I updated it.😁.
@JusRc
Жыл бұрын
@@Mr.RC-Creator Thank you!!! One last question, how many inches is the boat in the video, the file defaults very small, for your size or 1/10 what MM what do I put for the X,Y,Z or just size up the largest by bed will do? Thanks Again!!
@Mr.RC-Creator
Жыл бұрын
@@JusRc You can adjust the size as you want or 200%. 🙂
@JusRc
Жыл бұрын
@@Mr.RC-Creator Thank you so much for all the responses, I have been looking for a good zodiac file, one last thing, for hull_2, could you make the back wall thicker? Plan on mounting a Kyosho Jackson outboard to it. Thank you Again!!
@Mr.RC-Creator
Жыл бұрын
@@JusRcTry again hull 2.2.😁
What was the print time on your b1?
@Mr.RC-Creator
Жыл бұрын
It's been so long, I don't remember.😅
bonjour avez vous les stl des supports moteur svp et de l homme merci
Why not having actual outboards
@Mr.RC-Creator
Жыл бұрын
I didn't really have an outboard at that time. Thanks for the recommendation.🙂
maybe 20 hrs or so?
@Mr.RC-Creator
Жыл бұрын
Yes, maybe. 😁
Hello very good job! do you have the trailer .stl file to share? Thanks in advance!
@Mr.RC-Creator
Жыл бұрын
Link e trailer .stl www.thingiverse.com/thing:3539109
@rccustomscale4989
Жыл бұрын
@@Mr.RC-Creator thanks bro !
Hiya can you please post a link for where to buy the electronics? Thank you!!
@Mr.RC-Creator
Жыл бұрын
You mean CR2032 Cell Battery Socket/ LED Light , right?
@Mr.RC-Creator
Жыл бұрын
www.aliexpress.com/item/1005001419496742.html?spm=a2g0o.productlist.0.0.351b41102PXqaC&algo_pvid=a2d37203-b538-48e5-9be4-8b5bd2f81cc8&aem_p4p_detail=2022120918081511668016618030550001898032&algo_exp_id=a2d37203-b538-48e5-9be4-8b5bd2f81cc8-4&pdp_ext_f=%7B%22sku_id%22%3A%2212000016029151515%22%7D&pdp_npi=2%40dis%21THB%2142.39%2135.09%21%21%21%21%21%402103250d16706380959034765e85e7%2112000016029151515%21sea&curPageLogUid=lzCQSUvOtLvj&ad_pvid=2022120918081511668016618030550001898032_1&ad_pvid=2022120918081511668016618030550001898032_1 www.aliexpress.com/item/1005002059922896.html?spm=a2g0o.detail.1000014.2.7c2a17cc8xK4a5&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40050.281175.0&scm_id=1007.40050.281175.0&scm-url=1007.40050.281175.0&pvid=add8e975-2abe-4d48-b749-81bfc669ee66&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.40050.281175.0,pvid:add8e975-2abe-4d48-b749-81bfc669ee66,tpp_buckets:668%232846%238115%232000&pdp_ext_f=%7B%22sku_id%22%3A%2212000018593537168%22%2C%22sceneId%22%3A%2230050%22%7D&pdp_npi=2%40dis%21THB%21242.57%2197.03%21%21%21%21%21%4021032fa616706386915265210e4c97%2112000018593537168%21rec
Please, share new stl)
@Mr.RC-Creator
Жыл бұрын
Link www.thingiverse.com/thing:5461389
@ARCparamodels
Жыл бұрын
@@Mr.RC-Creator Thanks! I didn`t see "Hulk"))) Could you explain difference between Hulk 2 and Hulk 2.2? What scale did you use for print? Thanks!!!
Are stl files available to share?
@Mr.RC-Creator
2 жыл бұрын
Link www.thingiverse.com/thing:5461389
@alexsh3018
Жыл бұрын
@@Mr.RC-Creator 404 page not found
@Mr.RC-Creator
Жыл бұрын
@@alexsh3018 Try again.🙂
@alexsh3018
Жыл бұрын
@@Mr.RC-Creator It's OK now, thank you !
ลำนี้ทำขายไหมครับ
@Mr.RC-Creator
2 жыл бұрын
ไม่ได้ทำขาย..ลองทำเล่นดู ..ครับบ
Bonjour vous le vendez ?
@Mr.RC-Creator
Жыл бұрын
Je ne vends pas, merci pour votre intérêt.😁
I need one how much fir scale build
@Mr.RC-Creator
Жыл бұрын
I don't sell, I just like to play.🙂
@loganthomas4636
Жыл бұрын
@@Mr.RC-Creator OK fair enough it just it would be prefect behind my land rover
@Mr.RC-Creator
Жыл бұрын
@@loganthomas4636 Thank you so much!!!😁
BONJOUR QUEL % POUR LE MOTEUR POUR LE BATEAU QUI EST A 100% SUR UNE ENDER3 MERCI
@Mr.RC-Creator
Жыл бұрын
Vous pouvez ajuster la taille selon vos besoins. Diaporama avant impression🙂
Can I buy it?
@Mr.RC-Creator
2 жыл бұрын
I don't sell, I just like to play.🙂
@athuynh824
2 жыл бұрын
@@Mr.RC-Creator oh so sad, thank you!
@seorwulf1049
2 жыл бұрын
@@Mr.RC-Creator 😢😥😔 you need to sell them, they're great!
@athuynh824
2 жыл бұрын
@@Mr.RC-Creator can you tell me your gmail? I'm really excited about this product
@Mr.RC-Creator
2 жыл бұрын
@@athuynh824 Thanks. 😁