We don't get enough long-term durability tests on 3d prints. This video is very much appreciated.

Hi, I printed 12 helical spur gears out of PLA+ for an agricultural seed planter. The gear turns very slowly and is used to grab a seed out of a hopper and drop it down a chute. So far so good.

I printed gear for car wipers from PETG half a year ago. Still works.

@gintarasbaranauskas2035

5 жыл бұрын

I use PETG too! Countless parts: levers, gears, handles, boxes and etc. Still works perfectly!

A good way to create reference images for 2D parts is to put them on a flatbed scanner.

@zsigmondkara

5 жыл бұрын

This

@hannesgroesslinger

5 жыл бұрын

Yes! And put a ruler next to it, so it's easier to get the size correct

@MrPashee

4 жыл бұрын

Yea but most of them have very small depth of field and scanned stuff will be not in focus(

@Andreas-gh6is

4 жыл бұрын

@@MrPashee I still think that a flatbed scanner is the better choice unless you go into photogrammetry. You could also try to shoot a video from different angles and then use Blender to track points of interests and compute their 3D space...

@pepe6666

4 жыл бұрын

this is a neat idea.

i work in a printing factory. One of the first things that we printed was a spur gear replacing one made of wood (yes, wood) The machine was so old that there was no replacement parts. This was 3 years ago and the gear is still there, printing km of paper every day :-D Long story short, since then we printed a lot of replacement part, usually we use the PLA gears while we wait for the proper stainless steel part.

@Anonymouspock

5 жыл бұрын

The people from Ultimaker were talking about how a very large beer factory does the same thing because the printed spares are so cheap. So it's becoming a somewhat common practice.

@clarkkent6026

4 жыл бұрын

I dont know what friction you have but I 3Dprinted a laser printer fuser gear in PLA and it only lasted 1 month; then switched to ABS and lasted 6 months; then turned to Nylon and it's still working after 1 year; so PLA in my experience (and if you look at the physical properties in the specs) is no good for anything that requires constant friction; it cracks easily and wears very fast (for example it's not even good for a sliding external hard drive case!)

@throwawayaccountm1325

4 жыл бұрын

Maybe you should get and sls printer to print Metall parts ?

@wernerhiemer406

4 жыл бұрын

@@clarkkent6026 I printed some small sieves. I wish I could or had made them interlocked while stacked to reduce dust emmision. (5, 4, 3 and 2 mm)

@michaelbujaki2462

4 жыл бұрын

@@throwawayaccountm1325 The thing with SLS is that you still need to machine the part after it comes out, it just gives you a starting point closer to the finish line. With PLA spares, you can print the spare, get the part ordered in, then melt the temp help spare back into filament.

Thank you, there needs to be much more "gears for non-engineers" content out there.

First Time I EVER bought something from an affiliate link. ...it was the salad spinner 🤦‍♂️

I 3d printed a gear for my lathe to get the ratio I needed to cut screw thread of the correct pitch. Works perfectly. I used PETG instead of Nylon because that's what I had available, it seemed like a better choice than PLA for the application.

@jonathanhodel3832

3 жыл бұрын

What size is that late?

@AlexanderBurgers

3 жыл бұрын

@@jonathanhodel3832 Tiny. it's an Atlas 618 (6"x18") machine from the 1950's, more or less comparable to the mini lathes of today.

@jonathanhodel3832

3 жыл бұрын

@@AlexanderBurgers ah ok, thanks! I just tried to 3d print a gear for a doughmixer, worked once and broke the 2nd time :/ guess i'll order part :)

@ogt92fromthe1step9

3 жыл бұрын

@@AlexanderBurgers I have the same lathe. And I'm here for the same reason 😁 Great little machine. Works great in my basement for small projects that I don't feel like going out to the garage to turn the heat on to run my clausing 12x48.

The thickness issue you faced can be take care if by adding the backlash parameter. If gears are made perfect they tend to Jam up and therefore the thickness is reduced and backlash added to make the gears more resilient and mesh better

Hey Stefan, Superb revisit, I remember watching the original video 2 years ago. Doesn't time fly. Loved the tip with the chamfer. I will be referring back to this if I ever need to replace gears. Good to see how well the PLA stood up to the job.

Thank you so much for including keyboard details...so few teachers understand new users struggle navigating the key combinations.

Recommend using a flat bed scanner to get reference images of flat surfaces. They don’t really have parallax error like a camera does.

This is your first video I have seen and loved your breakdown in fusion 360 about how you refined and set up the gear. I'm starting fusion 360 now after 10 years of using Maya since I just got a 3d printer. Definitely excited to start learning fusion now that I understand the workflow a little better.

I absolutely love that you walked us through that and showed the circle shortcut for the gear teeth mods. I actually feel ready to tackle a gear design when I need to next. Thanks.

"Because metric" is probably the best explanation for any machining problem. BECAUSE IT'S SENSIBLE!

This was absolutly an amazing Video and Walk through Stefan. Thank you for this. Please Keep up the Good work.

Somewhere out there, someone is spending $1000+ on a Prusa to fix their $20 salad spinner after watching this video.

@dragnet53

4 жыл бұрын

IF they were smart they could go cheap and get an Anet A8.

@wxfield

4 жыл бұрын

@@dragnet53 You missed the point entirely.

@arctic_angel7408

4 жыл бұрын

wxfield lmao

@romjab

4 жыл бұрын

How do you know if someone owns a 3d printer? They get excited when something breaks

@wernerhiemer406

4 жыл бұрын

@@romjab Luckely sheet metal printing or bones printing is not possible or as easy. Or even a soul printer.

You, your countyman Thomas, and Joel 3DPN are the best guys in 3D printing world. Also Chris Riley with his tutorials is worth to mention. GJ guys, I learn a lot from you

@TheLogneo

5 жыл бұрын

Dont forget Angus from Makers Muse

@DelicAlmin

4 жыл бұрын

@@TheLogneo yeah man, Angus is great guy too... Sorry MM

Broke a gear and shaft on a hand held label printer at work. Used LocTite with 3mm bolt as shaft and printed gear. Still works a good as new 2 years later!

@hyperjohn6627

3 жыл бұрын

LocTite is great

GREAT VIDEO! Replicating a gear was my introduction to Fusion 360, took it on for myself and wow! what a challenge. The gear tool certainly was a lifesaver for me as well.

Great video, loved the practical applications and always love to see new filaments. For your great test, print two matched gears and throw one on a stepper and the other on a brake, soon them up for runtime and brake hard for durability. Good luck, can't wait to see that!

Thank you for this video Stefan. Although I have already made gears in Fusion 360, I have learned a lot from it. By the way, I find it amazing how well the PLA has kept it if you actually use this salad dryer a few times a week.

Hey Stefan! Deine Videos sind absolut genial! Du ziehst das Ganze auf eine sehr interessante und dennoch wissenschaftliche Art auf. Deine Videos sind deutlich vorgetragen und nie langweilig. War jetzt kein Anfänger im 3D Druck, hab aber sehr viel durch dich dazu gelernt! Weiter so!

I havent had a chance to repair any broken gears yet, but I have used the tool to make myself a small dc generator from an old dc motor that is able to charge my phone in emergencies. I was really surprised at the ease of use of the spur gear tool and I thank you for showing me how to use it! I appreciate the content! keep it coming!!

Hey, Stefan! Guten tag. Thank you for taking the time in sharing this. Wow! I am going to buy my bride one of those salad spinners. I've never heard of them before and I am going to save this video to help me learn up on 3D printing.

Excellent tutorial, thank you very much, I learned a few new tricks! Your regular videos are great but I would love to see more tutorials from you, very well explained and easy to follow. Cheers!

@CNCKitchen

5 жыл бұрын

Thank you, I'll see what I can do.

Thank you. Nice presentation.Very helpful tips. I had a very similar situation and used the Fusion 360 add-in too. My neighbor needed a gear stack similar to yours, but even smaller. I was still new to 3D printing and thought making it would be a fun project.I spent about two weeks on it! In the end, I made it from Taulman 910 Nylon using a 0.2 brass nozzle. It is still working on his MIG welder 3 years later. Btw, that was a great tip about compensating for elephant foot.

Thank you so much for this amazing step by step explanation and toutorial. You do great work Stefan!

Awesome and practical content. I am completely new to all of this, with my first 3-D printer supposed to be arriving today (Bambu Carbon X1). Your channel popped up in my searches, and I like some of the practical uses that you outline beyond an expensive hobby.

printed a nylon gear for an oil pump in a rotary die cutting machine at work, still holding up after 1 year

Great video Stefan. Lots of good tips and techniques.

Thanks for showing that gear tool! Now I want to make something geared! Great video

Salatschleuder: Lass mich sterben! Stefan: Nein! 🤣 Awesome video and great tutorial! 👍

Stefan Thank you so much. As an F360 neophyte I just learned an immense amount of info.

I really liked learning more about designing mechanical components!

Great video Stefan, great tip about the chamfer inside the gear to aid in 3d printing...I will use that in the future :)

Just perfect 👌 Thanks for every detail

You missed a tooth with the bottom chamfer (17:35)... Maybe it would have been better to compensate in the slicer after all. :P

@alexanderthomas2660

5 жыл бұрын

He did get it right on the final gear though!

@phinok.m.628

5 жыл бұрын

@@alexanderthomas2660 Yeah, I figure he noticed eventually. I guess it doesn't matter much on a "test print", I mean, it wouldn't even really be that bad the final print. Just not perfect...

Very good presentation of a complicated process. I’m trying to learn 3D printing (don’t even have a printer yet) and this kind of content is very helpful. Thank you for sharing your experience.

Love the gears video, would love to see more, also printing them with smaller nozzles and detailed print settings. Looking forward to new content 👍

This was super helpful. I needed this. And thanks for the lead on the nylon filament! 👍

As always another great display of skills . Ty

Nice walkthrough I did learned something to day, as always👍😀

A very nicely made video. I'm exploring all the possible uses for my 3D printer and this is extremely helpful. Thank you, tschuss

Awesome video and excellent explained. Now even I can print gears ! Thnxs for sharing !

GREAT mechanical engineering overview!!! Great job!

Unbelievable. I was using a salad spinner today and thinking, here's something that failed for us before, because the gears failed. I also thought, this is exactly the kind of thing I would try to print. You rock!

danke schae stefan.. was waiting for something like this to come up !

Instead of the chamfer on the inside, you can also use what I've seen referred to as "sacrificial bridging" - make the hole completely closed for one layer's worth of height, the rest prints on top of that, and then you can drill it out.

Thanks for the Fusion 360 lesson. I had fun following along!

Great video. Good walkthrough. : )

I've replaced gears on my old 3d printer extruder and then made my own gears to replace the extruder all together. I have a video on the old 3d printer that was over 10 years ago and before the video, the gears worked just fine so they last a very long time. they were PLA only and I had no issues using them for this. I have since moved on to the CR10S pro and thus did not need the old printer anymore and well it has gone to printer heaven lol. but I hope for the best with your salad spinner. I love the work you do and please keep it up.

Printed a replacement gear for my Littermaid. The nylon had issues with layer adhesion, but the PLA worked perfectly.

That's an awesome gear tutorial! Thanks for this :-)

That was very useful. Many thanks.

Nice Video Stefan!

You are my favorite creator by far. Your engineering approach and focus on detail is great! I am curious which brand and type filement did you use to print the gear?

@CNCKitchen

5 жыл бұрын

That was PA12 Lite from Fiberthree but that's currently not available for hobbyists.

I printed gears for a Pasta machine which is 60 years old, it is called Pastalinda and it was a gift from a firend's mom. Now I have fee pasta since now they work. I use some internet tools to design the ration since I was using Rhinoceros, and just needed the profile. IT works great and stands the abuse

great info. im a newbie to 360, so knowing it has a hidden gear menu is very useful

This was great, i wish there are more videos about gears

Excellent video. I learned about 360 gears with Paul McWhorter's latest 360 class, this added some details, especially about replicating an existing gear. I have an old Sharp front load turntable whose tray load gear broke so I'm planning on printing a new one.

Wahnsinn, wie sich Dein Englisch seit den ersten Videos verbessert hat. Weiterhin viel Erfolg... Impressive how your english improved since the fist videos. Good luck in the Future...

We have fixed a similar spur gear in an Ariete Gratì cheese grater by printing a replacement part with our Creality CR-10s, using standard PLA. Still doing good after 9 months.

Good to know. I made a replacement actuator gear for a car AC a few months back. Was wondering if it would last. Thank you

Thanks for sharing, great work ! I have made gears with my 3D printer but for pre-made work file. May need to make a special gear for a project.

Great info. I've used the spur gear tool many times. You can also edit the timeline to redefine the sketch plane the gear is created on. I wish there was a worm gear tool in Fusion 360. I'm pleasantly surprised that PLA gear has lasted so long.

Omg I fixed the exact same mechanism on my salad spinner about a year ago and just found this video. I was so confused seeing this little gear on your thumbnail. That is 100% engineered to break so that people need to buy a new spinner

You could use a variable speed drill in order to see how the parts perform over long periods of use without actually taking a long time. You could also apply some load to the work gear that you are turning with your test gear and that should allow for some resistance.

I make hard to find or expensive car parts for local autobody repair shops in town. The most often requested broken part is electric window gears or guides. Generally you have to buy an entire assembly sometimes in the several hundred dollar category. After a $40 dollar nylon printed gear, they are up and running again. thanks for the video:)

Gears are probably the most fun things to 3D print! I made a lot of them, and even printed a 0.5 module gear with a 0.4mm nozzle.

Thank you so much. Always was such a pain making gears by hand in fusion 360

Excellent video. This is exactly the sort of thing I bought a 3d printer and am learning CAD for. In my case it will be for RC car and boat parts. I've also found a few things around the house I want to tackle

Thank you. I really enjoy your videos. Thank you very much for sharing your knowledge.

I never made a replacement gear, but i did make a few 16 teeth MXL pulleies for a printer and they worked great in pla with a 0.25 nozzle. As for the gears, the gears in my printers are all in pla/petg and they work 24/7 no problem and almost 2 years and barely any wear. Once the gears wear in and the lines vanish and the surface becomes smooth, they barely ever wear the downside is the temperature resistance, so i use petg for the small gear that goes on the extruder motor.

Outstanding thank You I have a need for a gear that is driven by a worm. I hope Fusion 360 has that too. Great Video!

the channel name gets more and more literally

Love this video!

I printed some M2 gears for my lathe several years ago, they are still in very good condition!

I always wonder how you would make a gear in f360, thanks for sharing.

GREAT VIDEO, thank you

Great video !

Nice Video. Nice new CI, btw.

I printed a replacement gear for a bread cutter, using PETG. Although the original had a metal insert with internal thread, I opted for cutting the thread directly into the plastic and it works great. If it ever fails, I will redo it with the original insert, but my guess is it wil probably live longer than the original one (and likely than the rest of the machine!)

Thank you for this vid. Helped a lot.

For the wear tests, do a couple of gearboxes, One high rpm to low rpm, as a winch or crane, load it until it breaks, filament that pulled the most weight wins. One low to high rpm, with a fan to provide a constant load, drive the input faster until it breaks, filament that survived the highest rpm wins. If you're up for some suffering, you could try acme thread.

@km5405

5 жыл бұрын

fan is not constant load. its curve goes up with its speed roughly quadratically.

@TheVexCortex

5 жыл бұрын

@@km5405 The load is constant, as in, constantly applied, as in, there isn't a time where there is no load.

Probably the best fusion gear video ever...every step not only shown, but spoken in real time. I've avoided gears entirely until seeing this. Would be awesome to see the process of designing and adding a battery powered electric motor to the salad tosser and ditch the pull cord. It would be cool, plus the elements required to do it would translate to thousands of other projects like r/c boats/cars/aircraft, robotics and even the broken gears and support structure in my stupid bmw seat that keeps breaking :-)

Great education, so helpful, thanks a lot 🎉👍

I made an unobtainable head rotation gear for a classic Sony auto reverse cassette deck. The material I used was PLA and the gear was designed using a macro created for 3D printing. The teeth did not mesh properly after I put the gear into use so I used a heat gun to gently heat the gear while I cycled the mechanism and this lapped the gear teeth perfectly to the rack. It has worked flawlessly for 3 years now and I believe this is the easiest way to set the gear lash when using PLA.

Like many here I'm not interested to print anime characters and vases. So this is great.. this type of applications and tests. A simple test rig would be to turn with a motor a gear which is in mesh with a 2nd gear. The 2nd gear could be under measurable frictional tension, and/or be turned on and off with an Arduino, and so on.

Awesome video! Cheers

Yes I learned a lot. Thanks Realy good upgrade.

Ready for year 3 review!

You really covered a LOT in this video!! Great Job - I am going to have to study up on some of it. I didn't know the historical chamfer technique for the teeth, and the internal chamfer for 3D printing was very interesting. Now for the gear I printed - I didn't need to replace it, but wanted to test and see how it would work. Using ABS I printed a spur gear for my South Bend 10K lathe carriage travel. It has been working very well for months now driving the carriage for threading and cutting. I did have one crash (oops) and the gear broke/split. However, this was good as it acted like a fuse, where as the original metal gear probably would have caused much more damage. Note: I had to convert from Imperial to Metric, as you know. I personally wish everything was metric, seems to make more sense to me at least.

Great video! I would love to see some tests addresing 3D printed gears, maybe allowable torque and speeds to see whether they will melt or maybe fail in some other way

@claws61821

5 жыл бұрын

Check out @GearDownForWhat. They're almost entirely focused on 3DP gears. I agree that I would like to see a more scientifically detailed examination of individual gears from @CNCKitchen, though.

@witoldkaptur59

5 жыл бұрын

@@claws61821 thanks, I know his channel :D but I would love to see some scientific-ish data regarding printed gears

Lettuce praise these durable gears!

making gears this small gives me hope i could one day print desk clock molds and make some brass gears for one :)

I was really surprised there is a free gear design tool in fusion360, I already have the program but forgot about it, and was struggling creating gear I needed in other CAD. Thanks for a useful heads up!

For those that wondered what RMB is as well, it's lingo for "Right mouse Button" - I had to stop the video and wonder for a second what that was :D

Excellent video thank you

nicely done!!