Attention everyone! I've been getting comments on this video guessing this is like a 500-SHTT or something. If you really want to leave a guess in the comments, please do so. All comments are appreciated 😃 However, if you're just looking to find out what model siren this is, @romainetomatoes2416 and @Siren-experiments have comments with the correct answer for you to view. I also have a community post I made a while back of an update on version 3 of this project. I have already filmed a test video of this siren, but it didn't go according to plan lol... I'm editing it anyway cause I still think it will be entertaining to watch, and I want to get back into posting soon for you guys! Anyway, thank you all so much for your engagement and support!

@Fyrekitten

Ай бұрын

mobil directo right?

@DieSirenenwerkstatt

Ай бұрын

can't wait for new content about the siren ;-)

@TheOfficialDorianelevator

9 күн бұрын

might be a carter siren or some UK siren

Wow very nice. These are based upon the Mobil Directo & first generation Allertor rotor, stator sets. I've studied the rotor design on both sirens, the rows of the smaller blades are all equal length in both rows, while 4 of the big blades line up with 4 of the smaller ones on the 12 port side, while two only line up with two on the 10 port side. Then the remaining two of the 4 big middle blades of the 10 port side sit inside of the inside edges of the pairs of the smaller blades around it to make the sound pulse & not protrude further than the inside edge of the middle & top rotor ring.

@breadsyt9975

Жыл бұрын

Nice one! I'm assuming you saw the community post I made of the redesigned model

@Siren-experiments

Жыл бұрын

I have not. The first generation Allertor is my favourite siren. On that rotor design as it can rotate clockwise or anti clockwise rotation the end of the rotor blades are a T shape not L shape like on directional ACA sirens made at a later time of production. To try & give a visual of how the 4 big blades are between both ports, the back is like this + while the front is like this -+-

@Gvacs

8 ай бұрын

​@Siren-experiments So on the 10 port side the vanes stop at the port divider? and the top ones continue through like those of a model 5 per say?

@Siren-experiments

8 ай бұрын

That is correct. The 10 port side is at the front. No The 12 port row at the back is very similar to a Model 5s rotor. Just hasn't got the 8 little rotor blades around the 4 large ones sticking out like on a model 5. Instead the 8 smaller ones are shorter & in line with the bottom rotor ring on that row. Bit like the 8 smaller ones on the 10 port side since only two of 4 middle blades line up with only two of those.

@Gvacs

8 ай бұрын

@Siren-experiments Interesting! Thanks for the explanation. Also pardon the fact I forgot the 10 port side is at the front on these lol.

Maybe Federal Signal 2T22 or ACA Alertor? there are a lot of sirens with 10/12 ports out there.

@ctdcgaming2440

11 ай бұрын

It looks like a Directo rotor

World War II Carter if you spin it at 2840 RPM(I think that’s how much rotations per minute that the siren is)

If you have a shaft on V2, can’t you just fasten the drill’s chuck to the shaft and directly drive it?

@breadsyt9975

5 ай бұрын

Technically yes. However, it would actually sound worse than using the tire because it would accelerate far too fast, but spin slower overall. It's like a large to small gear ratio if that makes any sense. thx for the comment 👍

I didn’t get a clear enough look at all the ports in the 10 port row to tell if it’s an accurate replica of a Mobil Directo chopper. 2 of the ports in the 10 port row should be cut in half by the main chopper blades that extend all the way to the center.

@Siren-experiments

8 ай бұрын

You are correct.

@breadsyt9975

5 ай бұрын

That's exactly what I did with the new design. it took a while to find good reference photos/videos of the siren, but i eventually found a youtube video of some guy who bought a refurbished mobile directo. he literally took it apart and included close up shots of the disassembled parts lmao

@romainetomatoes2416

5 ай бұрын

@@breadsyt9975 which video is that?

@breadsyt9975

5 ай бұрын

​@@romainetomatoes2416The vid isn't out yet, but I have made a community post a while ago with some screenshots of the model. I'm planning on shooting a test video of the new siren in a couple days so that'll be exiting!

It sounds like a thunderbolt 1003 or 1007

@SylvesterTheSupernatural

5 ай бұрын

Wtf is a "1007"?

Hey do you have an update on this project? Id like to see the final or in progress design

@breadsyt9975

7 ай бұрын

I've already made version 3 but I can't seem to get a good recording of it because it's too loud. Like I have to test it in a remote location that also has an outlet, and as far as I'm aware that doesn't quite exist anywhere near me lol. I also need to get some good ear protection for a full blast just to be safe. I made a community post with a screenshot of the final model which I made in blender for some reason (i use fusion now), but that's about all. If you read this whole essay then props to you man lmao

@thedancingpickle6362

7 ай бұрын

​​@@breadsyt9975 read it😁

can u 3d print that?

I want a v2 because v2 sounds like a 2/3t22

maybe a Mobilo directo or ACA alerttor

Maybe this Castle Castings Air Raid Siren

What filament did you use for the second print.

@breadsyt9975

2 ай бұрын

Just some grey Sunlu Pla. It's good for basic things, but If I had to print this again Id' probably go for pla+ or petg. It works fine though so I guess it doesn't really matter lol

Maybe ThunderBolt 1003 hi lo lots somes sirens

First: General Siren Second: Friction Siren

Put motors on it

can you upload a video of version 3?

@breadsyt9975

2 ай бұрын

I'm actually editing that video right now loI! have a pinned comment with an update on that if you want to check it out

Maybe a 500-SHTT

@breadsyt9975

Жыл бұрын

Good guess :) I will say that I was thinking about making a 500-shtt, but instead I settled on an older 10/12 siren no one has ever made a miniature of.

@SirenLover1000T

Жыл бұрын

@@breadsyt9975 so I suppose a omnidirectional CLM or something like that?

@breadsyt9975

Жыл бұрын

I think its hard to guess because in did not use good reference photos when modeling these, so it doesn't look exact. I am redesigning it with better pics so it looks more like what I'm going for. I've made a community post with a screenshot of the new model so it's not unnecessarily hard for people to guess.

@TheCasualSirenEnthusiast

11 ай бұрын

​@@SirenLover1000Tit's a mobil directo. 🗿

@asherhayden5729

11 ай бұрын

that's what i was gonna say

Maybe A 10/12 ACA Allertor

@breadsyt9975

23 күн бұрын

It's a 10/12 Mobil directo, so yeah pretty much the same thing lol

What software did you use to design this?

@breadsyt9975

11 ай бұрын

I designed these sirens in blender, but I've recently been trying out fusion 360 which I will be using for other 3d printed projects I make.

@JuanArgenal-rw9fx

3 ай бұрын

​@@breadsyt9975hdmjdjsi

big sirens sound better than the vid

🗿

2t22

But 😅

😠hmmmmm

Kdslele😅

500-SHIT

😂😂😂😂

Maybe…

ไม่บอกหรอก

555

ACA 10/12 Allertor siren or a Mobil direction Nascarsimracing1 is making a mobil direction so

😂

😂