3d Printed Airsoft Impact Grenades part 2
Ойын-сауық
This vid is a continuation from version 1 of the grenade which is still in use but moved onto a threaded top.
I explain the differences between both versions and show a comparison against a .209 primer in a Dynatex grenade.
If you're willing to experiment with design and printing techniques you can create something bespoke on your own. I hope this can encourage people to take the plunge in designing their own airsoft accessories with all of the free CAD software available now.
- Onshape is free, online, doesn't require powerful computers and easy to learn. But the free subscription allows others to see your designs. I started with Onshape its quite intuitive allowing you to literally login anywhere on any device.
- Tinker CAD, Is free and simple but more complex designs might need either Onshape or Fusion.
- Fusion 360, Is also free for a non corporate account also allowing you to login anywhere as it keeps your work online. Easy to use probably has the largest community as they have the most experience.
If you're after bespoke 3d printed kit check out Airtac www.airtac.me and use code Adventure10 for 10% off.
The grenade
- 40 mm in diameter
- 70 grams fully loaded ready to throw
- Printed 100% infilled PLA for the body and 85% for the cap
For further information please email me at adventure.airsoft1@gmail.com or Facebook @advairsoft.
Link for version 1 below for elasticated cap
Grenade body large
drive.google.com/file/d/1YzEA...
Grenade body small
drive.google.com/file/d/1VG9p...
Grenade cap
drive.google.com/file/d/17NRk...
Version 2 screws cap as seen in video link below
Large grenade
drive.google.com/file/d/1EQ2F...
Smaller grenade 40mm diameter
drive.google.com/file/d/1qXyz...
Large cap
drive.google.com/file/d/17CzW...
Cap for 40mm grenade
drive.google.com/file/d/1TJG2...
My Kit Top to bottom
Fast helmet by Nuprol or close matchebay.us/C4rHYN
UBACS top Bulldog Rogue MTP ebay.us/xo8QrJ
Trousers Bulldog Rogue MTP ebay.us/1KBfdT
Nuprol mesh ebay.us/sqbsWW
Face guard / snood www.deltamikefacepro.co.uk/shop
Gloves Mechanix wear fast fit ebay.us/WetKlF
Boots Altberg Defenders used ebay.us/2B6NYv
Boots Aku Pilgrim ebay.us/s3DEQb
My belt kit heavy Osprey hippo pad ebay.us/BwsuJt
Surefire x300 lightwww.tactical-kit.co.uk/surefi...
Surefire x300 copy ebay.us/xSpRDZ
Safariland QLS quick change holster ebay.us/RTWVCf
Blackhawk omnivore holster ebay.us/75yEuL
Dynatex Dominator timed bombupairsoft.co.uk/products/...
Dynatex 6 shot 209 bombupairsoft.co.uk/products/...
Belt kit heavy Osprey belt similar item ebay.us/60Fyaw
Music in my intro and video is by a legend called Florian who creates bespoke rock and metal tracks, if you're into decent metal check him out.
@OfficialFlorianHaack
www.florianhaack.com/
Пікірлер: 69
Love it. I briefly did a Google search of something like this, but couldn’t find anything. Then I come across this video two days later.
I like it!
with Independence day recent, I found Snap Bangers at the fireworks tents. sadly they're smaller than the thunder snappers so they don't "fill" up the holes. this meant that i had maybe a 10% ignition rate. using a wide soda straw cut just a little larger than the length of my snappers helped a lot but it's still inconsistent on ignition. I'm not blaming the design, adding some info for people wanting to use this. you want the thunder snappers or something 6-7mm wide and about 35mm long.
STL print files now in description hope you enjoy them as much as I have
Nice, many sites are / have banned the use of those types of bangers 😒
this is brilliant. i was looking for something exactly like this. i was thinking of 3d printing a STIELHANDGRANATE and sticking one of these ontop
@adventureairsoft
Жыл бұрын
Hope it can help
@taylerzc1
Жыл бұрын
@Adventure Airsoft just realised the snap bangers are banned in this country now. 😑 I'll need to figure out another way to make replica stielhandgranate
@peterbaan9671
7 ай бұрын
@@taylerzc1- Illegal? What's next, the spoon?
What is the benefit of using a bigger one? Storage wise I would always go smaller wouldn’t you?
Printed the big one off, thank you for the files. The lid is really tight, I had to use a mole grip to tighten it all the way up 🤷♂️
@adventureairsoft
2 жыл бұрын
With printed threads using PLA I recommend a bit of Vaseline on both sets of threads when starting. The new PLA can cause a lot of stick slip making it very tight, once used a bit with Vaseline it works well.
@dannygurney5130
2 жыл бұрын
@@adventureairsoft love me a bit of vaseline for anything tight 😂😂
@chev_FTeam
2 жыл бұрын
@@adventureairsoft thanks, I ended up using some coconut oil just cause it was closer haha. I used 20% infill and the inner tube separated from the main body after about 6 uses. I got a couple of kills with it though
Not sure what I'm doing wrong with these but they don't go off very easily.
Would anyone like the new style grenade complete for free as stl file to print?
@Fourthmark
3 жыл бұрын
Yes please
@adventureairsoft
3 жыл бұрын
@@Fourthmark Link to drive for STL files now available
@whiskeymoon6233
3 жыл бұрын
Oh yes
Im looking for 3d printed 40mm airsoft grenade launcher rounds will these work?
cool
How did you get your caps to screw on so cleanly, I pry the cap on to get the threads to line up correctly.
@adventureairsoft
2 жыл бұрын
Try a little bit of petroleum jelly on all off the threads some materials cause stick slip. You can also use a bit of oil just to get it going.
Where can buy snaps ??
Alas I believe the snap bangers aren’t legal in the UK any more (despite being on Amazon) as a result my local CQB site have said no to me using mine 😢
@isaackalashnikov3681
2 жыл бұрын
God, i hate the UK so much
You should make a version that works with the circular snappers that are packaged in a bag
@adventureairsoft
3 жыл бұрын
Not tried those but might look at it although i have tried the other kids snaps in a little paper bag. Just pop them inside work fine but not a loud
@fork2309
3 жыл бұрын
@@adventureairsoft oof.
@fork2309
3 жыл бұрын
@@adventureairsoft cuz thunder snaps are kinda hard to get here in the US
@charlesxavier5420
2 жыл бұрын
@@fork2309 visit your native firework dealer.
@theinsectoid7536
Жыл бұрын
@@fork2309 bruh I have this memory from when I was like 10 my 30 year old neighbor came up to me and handed me a huge box of snap bangers and I thought it was the greatest day of my life
Silly question but how are you carrying the thunder snaps without the going off I.e being hit or if u trip n fall
@adventureairsoft
2 жыл бұрын
I was using a little 3d printed case that worked like a draw holding 209 primers and snaps. I did see someone use a kinder egg with cotton wool in also.
@camo_girl_uk4150
2 жыл бұрын
@@adventureairsoft sweet having little trouble finding the thunder snaps in UK now especially in Kent...thank you for the reply keep doing what ur doing dude 👏
So if these are 40mm wide could they be launched from an airsoft mortar the same way that NERF footballs usually get launched? (gassed-up 40mm shell behind it with no BBs, used as propellant only I believe)
@adventureairsoft
2 жыл бұрын
I assume so but would have it be under 40mm to slide inside the barrel but if they were yes could launch them. Not sure if any site would allow it though.
@wthk1-teito
2 жыл бұрын
@@adventureairsoft I have attended a site that allows certain types of projectiles for scenarios and the launching player is expected to basically miss on purpose and the projectile has a radius of (xx) number of feet where anyone in that range must call their hit. That'd be why I asked. Thanks for the info.
Live in cali, is there a way one won't cause a spark
@adventureairsoft
2 жыл бұрын
Apologies for the very late reply I missed the comment, Yes to prevent this you can tape around the outside or the inside of the grenade blocking the vent holes it will still function.
Are you still using these ? I'd love to see a one year update
@adventureairsoft
Жыл бұрын
Sadly no the thunder snaps are banned in the UK awaiting safety data sheets
@WildFireburns92
Жыл бұрын
@@adventureairsoft damn that sucks..
When I open the files in CURA the size is wrong, is massive, which is the exact height for each file? Thanks!
@adventureairsoft
Жыл бұрын
Think that’s an issue with cura as I use cura. Try and adjust the scale the diameter is 40mm if that’s set the length should be ok
@santiagodelnegro4920
11 ай бұрын
@@adventureairsoft yes I also use cura, thanks for the answer! I will try it
Hey. The snap bangers i find in my country are 5mm diameter and when i put it in the hole they are too loose . Can you please tell me the diameter of your snap bangers :) Thanks in advance .
@adventureairsoft
Жыл бұрын
Hi when we could buy them Geri the UK they are a similar diameter. The snap is designed to fit loose in the grenade and is set of with the force of the impact of the grenade hitting the floor.
Any new updates?
@adventureairsoft
Жыл бұрын
No sorry what are you after with them?
Do you have the plan somewhere
@adventureairsoft
3 ай бұрын
Do you mean the files if so it's linked in description
Feels like they dont sound enough on video
Hello mate. Can I ask if you sell these?
@adventureairsoft
Жыл бұрын
Hi I did used to when they were allowed in games in the uk but not now. This is due to the actual flash bangs being banned.
so no bb in there?
@adventureairsoft
Жыл бұрын
That’s correct no bbs just a bang
Just a heads up, the links are dead.
@markallen4212
3 жыл бұрын
True, Links are dead
@adventureairsoft
3 жыл бұрын
Apologies seems I have an issue with Google drive thanks for telling me. One back on I will let you know.
@adventureairsoft
3 жыл бұрын
@@markallen4212 Links now working apologies for the wait
@adventureairsoft
3 жыл бұрын
Links now working apologies for the wait
@DaveSmith-cp5kj
3 жыл бұрын
@@adventureairsoft I appreciate the work, thank you very much!
Yeah these are thunder snap holders NOT grenades, useless. (The green one that is)