A laborious project, great work! I'm looking forward to print 3D benchy :D

@BrianBrocken

3 жыл бұрын

Haha me to 😆, thanks man 😉👍

awesome project , I have been dying to get my teeth into something like this thanks for inspiration :)

Thanks you have given me an idea for my diy 3printer project

darn, you have some nice CNC skills there :-)

Super cool! Kudos.

AWSOME WORK! KEEP UP!!

Excellent 3d printer

wow, that's cool!

Awesome project, Brian! Keep it up :)

Great Work Man!

@BrianBrocken

3 жыл бұрын

thanks man 👍

Waw indrukwekkend ! Schitterend werk !

@BrianBrocken

3 жыл бұрын

Merci man 😉👍

우와. 대단하십니다. 멋있어요

Those one hammer hits are pretty satisfying.

Good work

@BrianBrocken

3 жыл бұрын

Thanks man ;-)

Next time you use linear rails, dont remove the small black plastic rail from the carriages, this is to stop the ball bearings from falling out, when you want to add the carrage to the final rail, just slide the black ones off directly next to the rail so the bearings dont have an opportunity to come loose

@BrianBrocken

3 жыл бұрын

That’s exactly what i did 😜👍 the tape around the bearing is to keep the black plastic rail inside

@BrianBrocken

3 жыл бұрын

At 02:30 you can see the plastic rail 👍

Echt wel een heel nice project! En die QR code op het einde is ook wel slim gedaan ;-)

@BrianBrocken

3 жыл бұрын

Haha merci man 😜👍

what materials have you been able to cut using it as cnc ? do you need to bolt them down to the floor for hard materials like wood or alluminum ?

Kudos for the commitment. What materials are you planning to cut with it? It will definitely not cut correctly aluminium, and even in wood it looks like it's going to take days to cut anything of that volume in 5 axes (3 axes would not been able to, except simple pyramids or so)? Fun project though.

@BrianBrocken

3 жыл бұрын

It’s only ment for foam to create fibreglass molds. All the details can be found here: bbprojects.technology

I see 3 axis... what are you plans for the other two?

@BrianBrocken

3 жыл бұрын

This is part 1 where i build and test the XYZ axis. Part 2 will probably about the 3D-print functionality of the machine and part 3 about the 5-axis part. The goal is to mill foam molds with the 5 axis machine.

@williamsteele

3 жыл бұрын

@@BrianBrocken Nice! Can't wait to see it all! Great job!

@BrianBrocken

3 жыл бұрын

Thanks man 👍

@brianware8818

2 жыл бұрын

@@BrianBrocken Did you ever get to the 5-axis part? I have been saving this video for ages waiting for the CNC results. :-)

@BrianBrocken

2 жыл бұрын

@@brianware8818 I didn't get to the 5-axis part yet. I'm currently working on a few other projects. Also when i first started this project Fusion 360 was still free for 5-axis machining. They now charge more then 2000 euro per year for the plugin. So I'm not sure what the future of this project will hold.

Waarvoor wil je deze gaan gebruiken? Lijkt me niet zo stevig dus toch eerder voor een lichte taak?

@BrianBrocken

3 жыл бұрын

Zal enkel gebruikt worden om foam te frezen en zo glasvezel mallen te maken. Metalen, hout en dergelijke is niet de bedoeling.

Hi'' good job bro

laser cutting is very cheap in South Africa can always supply the plates :)

Nice project. Subscribed! I plan to build it too. What worries me most is drilling in aluminum. For me I always struggle with that part. Maybe you could a video to teach us how to get good at aluminum drilling and making threads into aluminium?

@BrianBrocken

2 жыл бұрын

Thanks man, drilling the holes isn’t actually that hard. I used the 3D-printed parts as templates for the holes and this worked great. For some parts I printed the drawings 1:1 scale and used these as templates to create punctures in the aluminium as a guide for the drill. The project didn’t need any threading 😜👍 one advice i would give you is to always keep your drill sharp, if you do this it should cut through aluminium like butter 😉👍

@carstenschmied8455

2 жыл бұрын

@@BrianBrocken Which drills can you recommend? Do you sharpen them yourself? How? As I said, a video detailing all the steps (speed, pressure, drills, drill sharpening, tips, etc.) in real-time would be nice.

Ik vermoed dat deze opstelling wel wat zal flexen en zwabberen bij te zware belastingen. Ik hoop dat het voor jou toepassing goed functioneert!

@BrianBrocken

Жыл бұрын

Ja idd, wou er origineel een 5-asser van maken voor wat vormen in foam te frezen, maar toen werd de plug-in in fusion betalend en is het project eig stilgevallen. Ga hem mss nog gebruiken om te printen, kan ook zijn dat ik de materialen ga recyclen om een large scale delta printer van te maken.

@BrianBrocken

Жыл бұрын

Was eigenlijk ook origineel bedoeld als een testopstelling om nadien een grotere te bouwen van enkel meters lengte.

HI, Brian. How much PLA did you use to make this? Thanks

@BrianBrocken

2 жыл бұрын

Good question, i wouldn’t know. If I had to make a guess i would say at least 1kg.

Damn... i gotta get me one of those hammers!

I didn't yet opened your files but just wonder what spindle you will mount on b/c head and if this will have any endstops to properly zero those axis

@BrianBrocken

3 жыл бұрын

I just ordered this spindle: www.banggood.com/Machifit-ER11-Chuck-CNC-500W-Spindle-Motor-with-52mm-Clamps-and-Power-Supply-Speed-Governor-p-1027937.html?p=E01411629100201406T1&custlinkid=1616560 And yes, at 08:24 you can see the limit switches being installed and the homing sequence in action.

@bogas78

3 жыл бұрын

@@BrianBrocken I meant about 4tth and 5ft axis endstops like in this DIY project kzread.info/dash/bejne/lZaWrrOcddzgYpM.html to properly zero those axis

@BrianBrocken

3 жыл бұрын

Ok, my bad. Yes it will have limit switches on the 4th and 5th axis. I'm currently working on 3D-print function of the machine after which I will attempt the 4th and 5th axis.

Waarmee stuur je dit aan? Heel mooi project btw!

@BrianBrocken

2 жыл бұрын

Merci! Machine wordt aangestuurd door een Arduino Mega met Ramps board. Meer info hier: bbprojects.technology/blogs/projects/3d-printable-1x1x1m-5-axis-machine-3d-printer

Hello, what about hot bets?

will you ever publish part 2

@BrianBrocken

2 жыл бұрын

Since i started building this project the 5-axis machining plugin for fusion 360 went from free to 2000 euro/month so I honestly don't know.

@pedrobalduci7754

2 жыл бұрын

@@BrianBrocken omg I hate Autodesk so much but thanks for your reply

Whare is part2 of vid

Do u have an idea to make rc rocket launchers in future projects ?

@BrianBrocken

3 жыл бұрын

Yes i'm still working in improving the Spacex model rocket, I'm currently looking for different methods to deploy the landing legs (compressed air, gravity or even hydraulics) because they were to weak. I'm also working on an afterburner.

@snprojects7807

3 жыл бұрын

I really appreciate that because as I need to make one so I wait for u r video

And I thought my Anycubic Chiron was big...

Part 2

Start again ur space x project brian

Aluminum is soft, stop hitting it with a metal hammer, get a rubber mallet..

@BrianBrocken

3 жыл бұрын

Couldn’t find one, put rubber tape over it eventually

우와. 대단하십니다. 멋있어요