Just to answer some frequently asked questions: -The 3D design CAD software used in the video is Autodesk fusion 360, which is free for students and startups. -There's a complete step by step manual available for this catapult gift card, you can find it on thingiverse and on hackaday.io, links are in the description. -Links to the STL-files and instructions are in the video description.

Recently found your turntable design, and it’s clear, you sir are a stallion among mules. Aim high my friend

@BrianBrocken

4 жыл бұрын

Thank you very much man, appreciated 😁👍

@juantap5740

4 жыл бұрын

Damn what a beastly comment 🙏🙏

Thank you for your hard work! I printed one of these for my little brother doing a school assignment on catapults.

@BrianBrocken

4 жыл бұрын

Hahaha awesome man, glad it was usefull to your brother ;-)

Very cool! 😎 Thanks! I got this as a gift. My only real problem is figuring out how to wind the string. Even when I watch the video at 0.25 X speed, it's too fast to see how to do it. I'll take a look on thingiverse. Still very fun!

Cool print man! I can't wait to try it out and give one to my niece. Thanks!

Magnifique travail. Merci ! Very good job. Thanks!

It's an awersome thing!

Thanks for the awesome designs! Amazing work!

@BrianBrocken

4 жыл бұрын

Thanks man 😁👍

How do i string it ?

I think its awesome! great model

thank you friend, my son loves it

Thanks for the video and the model. Great music choice!

@BrianBrocken

3 жыл бұрын

Thanks man ;-)

Danke, gute Arbeit

Just built this one tonight. Works great 😆👍 I will put a video up on my channel on 3rd of February (obviously with credits to your design).

@BrianBrocken

3 жыл бұрын

Haha thanks man that's great ;-) (thanks for the sub btw 😁👍)

This thing I found else where, just saw this video - Printed it - this has some punch

¡Genial!

I had to resize a number of parts to make them fit, so no trimming and sanding. I can now give them to my grand kids and don't drive the parents crazy. On the trigger-beam. There are two things to look for. First - on the cross support trim any over hang the might interfere with the arm. Second - if your slicer is set for brim. make sure to remove any over hang from the brim. This correct the problem for me.

Best example of 3d printing ever, and very nice work.

@BrianBrocken

4 жыл бұрын

Thanks man 😁👍

Is there a trick to getting the release lever into the holder (number 7 in the instructions)? I've broken 3 of the holder tabs trying to put it together and the video cuts to it being installed already. :)

@BrianBrocken

4 жыл бұрын

I’m aware of the issue and I’m working on an updated version but currently all my projects are on hold because I have exams.

@dthomas81

4 жыл бұрын

@@BrianBrocken Sweet! Good luck on exams and I look forward to an updated version. 😁

@BrianBrocken

4 жыл бұрын

Thank you Dana! 😁👍

Awesome but can you upload some details about how the windings should be made in the axle?

@BrianBrocken

4 жыл бұрын

I uploaded a complete manual in pdf format on thingiverse you can find the info in there.

Can one effectively print this with SLA resin too?

Is it possible that you could make a version with looser tolerances?

i am too dump to allign the string, so that it pulls even on both sides, please help!!!

Can this be scaled up?

Thanks dude.., But, is there any trick from assembly design to multiple bodies for printing 1:01 ? I did some search without any luck.

@BrianBrocken

2 жыл бұрын

Hello Angga, There's no real trick to it. First you design your model and then you arrange all the individual parts flat on the grid manually with the move command and then you draw runners between all the parts to connect them like in a model kit.

How many walls did you use? I used 4 and its to thick

@BrianBrocken

4 жыл бұрын

Hello Steven, I use 2 walls.

how far does it go

None of the pieces fit together for me

@themblue8236

2 жыл бұрын

That means your printer isn't configured correctly

1:20