Excellent detail - clearly for users experienced with the UI. This is my first Davinci project and I had to keep going back, but I got there in the end!

@SmertimbaGraphics

4 ай бұрын

Glad it was helpful!

Excellent, thank you. I tried this with a corporate logo I'm working with. It works well. There are some issues with scaling once the image goes through the ImagePlane3D node. But that can be solved by keyframing the desired size in the Transform3D node as long as the original image has big enough resolution. I experimented with adjusting the copies in the Duplicate3D node as well. Great stuff. 😀

@SmertimbaGraphics

9 ай бұрын

Awesome, thank you too❤

Thanks! You are the best Da Vinci resolve teacher by far!

@SmertimbaGraphics

4 ай бұрын

Thank you so much♥️

Just a quick tip for something I just fought with for quite a few hours, if you make a loop of this, you have to make sure the length of the PNG file is long enough. So I had to edit the properties on mediain to loop as well

I often struggle with things which doesn't work even if I do everything exactly like person in a video, but this time everything works as it should work and I'm enormously thankful for this tutorial! Good job, keep it going!

@SmertimbaGraphics

5 ай бұрын

Thank you, happy to help💯

Thankyou So much brother, I followed this tutorial to make intro for my YT channel. Thanks again.

@SmertimbaGraphics

Ай бұрын

Glad I could help❤️

Good tutorial. Very Fast. I had to go back and forth a lot, because you were going so fast. Thank you.

@SmertimbaGraphics

8 ай бұрын

Glad it was helpful after all 😁

@MrSteve72

3 ай бұрын

slow down the playback speed to 0.75!

Thank you. for people who didn't update to new davinci vision (has EXTRUDE 3D node) to do some old project work. this is very useful.❤

@SmertimbaGraphics

6 ай бұрын

Thank you too ♥️

Thank you so much.

@SmertimbaGraphics

8 ай бұрын

You're welcome!

That's wonderful thanks you so much ❤

@SmertimbaGraphics

6 ай бұрын

You're welcome 😊

@jinkart

6 ай бұрын

@@SmertimbaGraphics 🤗❤️

Your skills are crazy

@SmertimbaGraphics

11 ай бұрын

No they are not😂 but thanks❤️❤️

❤

💖

@SmertimbaGraphics

11 ай бұрын

❤️❤️

bro salute to you to able to understand davinci nodes whenever i use nodes and stuff , its too complex for me sometimes [how do you understand these nodes]

@SmertimbaGraphics

11 ай бұрын

It could be confusing at first but nodes start making sense some time after using them😁 I learned nodes while using blender geometry nodes and shading.

I went step by step, but for some reason when I added color corrector and connected the transform 3d node to the duplicate 3d node, the logo only shows the darkened layers. It does not show the lighter "face" of the logo. I've ensured all the nodes are connected as the video shows. I'm using Davinci 18, if that matters. Any tips on the reasoning here?

@SmertimbaGraphics

Ай бұрын

It should bring the front layer forward by default, but if it does not, you can manually move the front layer, the one that's not darkened to the front by moving it on Z axis, moving it by 1 pixel should do the job

👋🏻💥😉👍

@SmertimbaGraphics

11 ай бұрын

😊🔥👍

A wonderful compact and instructive tutorial! Only that with me, with my logo animation, after connecting the duplicated transform node above with the duplicate 3D1 node of the main line, it produces and connects to the new merge node - but the whole logo remains dark (gain 0.4)! Not only - like in you video - the duplicated layers. Do you have any idea why?

@SmertimbaGraphics

5 ай бұрын

Try changing the operation mode of the merge node or move the bright logo to the front via transform node

@achimforst6097

5 ай бұрын

@SmertimbaGraphics Thank you for the quick reply. But because of my lacking Fusion knowledge I'm not sure if I understand your advice (operation mode of the merge node: I switched on and off the white dots with no result / don't know how to move the bright logo to the front). But maybe you mean the workaround I found by experimenting? : I connected the upper transform3D2 to the ImagePlane3D1, thus creating the merge node before the duplicate node (producing a gain difference between the front and the side of the logo), adding a second color corrector in the upper line and pushing up the gain for the whole composition (to 1.4.).

@SmertimbaGraphics

5 ай бұрын

There are always multiple ways to fix something, usually it's best to just experiment with it until you get it done, you will learn in the process

@achimforst6097

5 ай бұрын

@@SmertimbaGraphics That's roughly what also my Python coding son (19) told me ... 🙂

It's been a while since I saw a tutorial so well done, I followed all the steps and it turned out perfect, the only problem I had was that my PC stuck for about 30 seconds and the program closed, I think I can't stand it lmao do you know the way to stop me does that happen? right now I have 32gb of ram PD: this channel is amazing

@SmertimbaGraphics

4 ай бұрын

Thank you❤ Well there are many reasons as to why the pc may get stuck, it might be hardware issue or even software, crushes happen all the time and that's just something we all have to deal with😁

@retop8970

4 ай бұрын

@@SmertimbaGraphics i'm gonna upgrade the ram and see if works, keep doing this your are amazing bro

@SmertimbaGraphics

4 ай бұрын

Thank you, will do my best❤

When I connect the Transform node to the Duplicate node in order to get the shadow, it still leaves the entire thing as the darker color instead of making the front look light, like it does for you. Can't seem to figure out why. Thanks for your previous input

@SmertimbaGraphics

5 ай бұрын

You've got to move the layer with original bright color to the front, try it via transform 3d node

@killat0r

5 ай бұрын

@@SmertimbaGraphics Hmm, can't seem to see anything that allows me to do so through the Transform 3D node

@ShreyPlays

4 ай бұрын

Same issue

@ShreyPlays

4 ай бұрын

didnt work@@SmertimbaGraphics

Works great, but the logo I used doesn't look right with perspective turned on. How do I turn it off?

@SmertimbaGraphics

6 ай бұрын

You mean the darker layers in the back? If yes, you can just disconnect those nodes

shadows dont work for my logo. if i decrease the gain, the whole logo is darker and the merge does not add the bright logo back on the front. just everything is darkened

@SmertimbaGraphics

4 ай бұрын

Add a transform node to the front layer and move it on the Z axis slightly until it comes to the front. Sometimes it glitches out

please I tried view images and texts on the image plane but it is not displaying except in the render 3d.. how can I fix this? thank you

@SmertimbaGraphics

8 ай бұрын

Not sure, try reconnecting the notes, it bugs out sometimes

@we_xist

8 ай бұрын

@@SmertimbaGraphics I have tried it on different occasions, though I was able to animate the logo using 3d render.. I think the issue is with davinci resolve 17.2

How do I make this animation longer? I want it to rotate after it fades in

@killat0r

5 ай бұрын

The animation is only 119 frames, and won't let me extend passed that

@SmertimbaGraphics

5 ай бұрын

You need to extend fusion composition from edit page, then increase the distance between keyframes

The final example is nearly completely blocked by the suggested videos

shadow thing is not working, can u please help me

@hiteshsinghrajpurohit9284

3 ай бұрын

after connecting transform 3D to Duplicate 3D, still every part of logo is shadow

@SmertimbaGraphics

3 ай бұрын

Basically, you need to move the front layer that's not darkened down to the front, add another transform node to it and try moving it on Z axis

if i go back to the edit tab there is no animation, the photo just pops up outta nowhere

@SmertimbaGraphics

7 ай бұрын

Did you create keyframes for the animation?

@lcm_2080

7 ай бұрын

@@SmertimbaGraphics yes

when i connect to duplicate3D, nothing happen ???

@SmertimbaGraphics

3 ай бұрын

You pretty much have to move the layer without the shadow to the front, try moving it on the Z axis until it's at the front

@Tinhde810

3 ай бұрын

@@SmertimbaGraphics i figure out this bro, thanks