PLEASE SUBSCRIBE TO MY CHANNEL Part 2: DHCP & inter-VLAN CONFIG: kzread.info/dash/bejne/d5WKspufpamofaQ.html Part 1: DHCP SERVER CONFIG: kzread.info/dash/bejne/lXqeucNmY6-0dZs.html SVI Configurations: kzread.info/dash/bejne/X6GtqpmBnbO7otY.html Router-on-a-stick Intervlan configs: kzread.info/dash/bejne/jH6MvNyAk8THp7g.html OSPF CONFIGURATIONS; kzread.info/dash/bejne/fnaem6uOotCbgJs.html OSPF Basics: kzread.info/dash/bejne/gWSCyZmHk9Wyc8Y.html&ab_channel=GurutechNetworkingTraining EIGRP Configuration: kzread.info/dash/bejne/l3tqldSSadmapNI.html Introduction to EIGRP: kzread.info/dash/bejne/m2GlmbOCabO4qbA.html RIPV2 Configuration: kzread.info/dash/bejne/eWqNrNSQc8S9ms4.html Static Routing: kzread.info/dash/bejne/foGel8h-orPSppc.html Default Routing: kzread.info/dash/bejne/dZN4mduiaKaThdY.html Please subscribe to my channel, thanks for your support good people. LOL

Very useful. Thank u❤

@gurutechnetworks

11 ай бұрын

Cheers 🥂

You have a L3 switch in your network...but do not use it to route. So what is the point of having it there if you could have just used an ordinary switch?

@gurutechnetworks

Жыл бұрын

As a smart guy, you can use it to route, thank you!

hi sir i am following your video very long time my qustion is in this video my access layer switch is unmanaged how to create vlan and i have a one pc connected with d-switch different vlan now how can i manage d-switch and router by telnet or ssh also need to connection with different vlan devices like ap .

@gurutechnetworks

Жыл бұрын

Unmanaged switches for configuration?

Can you do a lab on 2 different ISPs for HA 1 HQ 3 Branches in 3 different locations are connected using VPN and HQ and all the branches should have an ASA firewall (ASA5506-X) . the firewall should have 3 Zones Inside, Outside, DMZ (ZBF) Should be a DHCP server for IP release (HQ and Branches) Subnetting should be there. Minimum 5 Vlans inter Vlan routeing between HQ and Branches each branch should have at least 2 Servers (any WEB, EMail etc...) Hq should have servers and branches should be able to communicate with the servers.

@gurutechnetworks

Жыл бұрын

Okay noted

@chamaragunasena6437

Жыл бұрын

WOW! This is a really good one can you do it before the end of this month Pleas 🙏🙏🙏🙏🙏🤝🤝 I was also looking for something like this I will add some more for the above requirement Minimum 4 switches for HQ and Branches (HQ = 4, branch-1 = 4, etc...) ACL to control the access between branches and HQ ASA should have rules for blocking and permitting DMZ should be protected using ASA(eg-: 2 web server 1 server only open for out side 2 server only for inside) NAT should be configured All the location shoul commuicate with using VPN only (SITE to SITE VPN) All the locations should have wireless access with security enable MAC filter etc..

13:07 How do I display the port label for an extended period of time when the mouse is over it?

@gurutechnetworks

Жыл бұрын

Change preferences settings and tick show port labels under settings

@phananorn2161

Жыл бұрын

@@gurutechnetworks under the interface tab? When you hover your mouse over a port in a logical workspace, the label appears too quickly.

I do not understand, multilayer can route subnets, router is probably just to access outside or other far networks. Why do you route vlans in router instead of in multilayer (l3) switch

@gurutechnetworks

Жыл бұрын

This was meant for intervlan routing on a router.

@gurutechnetworks

Жыл бұрын

This was meant for intervlan routing on a router.

I am not professional but I am quite sure that you wasted multilayer switch. If you are not going to use routing capability of multilayer switch then why do you use one. Just connect edge switches directly to router. The same configuration etc. Why the hassle.

@gurutechnetworks

Жыл бұрын

This was meant for intervlan routing on a router.