Just when you thought genius was finished

This engine is ideal for ultralight Helicopters!

Ive been designing an airplane for 25 years this engine would be the perfect one.

Complex, but simple, great tech. With bright future.

Best description I've seen.

Good innovation

it works, the only question now is durability or reliability

@georgesheffield1580

11 ай бұрын

Fuel efficiency ?

@zackrider3708

4 ай бұрын

According to experts, this engine cannot run well without a turbo or supercharger, it's uses the supercharger or turbo to prevent the exhaust air from getting inside the intake Port

@javadog6288

2 ай бұрын

And what about lubrication , cooling , and exhaust emissions? Does it burn and consume oil ? I'd like to see it adapted for a small, light vehicle like the Aptera . I would expect this drivetrain to be much lighter than an EV with a big, heavy battery .

@zackrider3708

2 ай бұрын

@@javadog6288 if you love technology just like me, then you know this engine needs to go through countless number of testings before it gets into production

This thing will wear out very fast. And BTW you can't have a "1-stroke" design because the power and exhaust strokes have to take place at different time.

@kopronko

8 ай бұрын

Well, a little faster , yes, Because of not precisely good paths of the cylindrical rollers towards the round curve of the guides .

@Vibakari

3 ай бұрын

Did u not watch the video it’s explained

@jebise1126

Ай бұрын

you dont need to run it for long on torpedo...

Esse novo motor pode ser a salvação dos motores a combustão .

Lubrication is not a problem. A bigger problem is the shock load on the rollers at the beginning of the explosion and the different peripheral speeds on the cam mechanism depending on the cam diameter and width of one cylindrical rolle. Rrolles must have conical shapes and cam area with half cone angle.

Where i can buy this 500 cc engine ?

The opposed piston design is interesting

its not a 1 stroke anything. its an experimental 2 stroke engine. and that's ok. I'm really interested in its real world abilities.

How abaout fuel consumption, better?

Any place where can I find this 3d plastic model for study?

Awesome

But how much nm torq does it have?

Nice, design of car compresser.,.

It’s like two ac compressors mated back to back sharing cylinder bore

How about mileage?

What about fuel consuption?

this engine will pull down for many decades to come the EV. 500cm3, 35kg, 120CP! That is the greatest achivment in the last 100 years of "German engineering". Farewell Hans!

I'm excited to see the next generation of ice engines

So it's a two strokes engine but we'll call it one stroke because it sounds cool

@kopronko

8 ай бұрын

Yeah !!! 🙂

Excellent Information❤😂

When is this engine being commercialised

Rica etsem altyazı seçeneklerine Türkçe dil seçeneği ekleyebilir misiniz ? Sizi anlamak ve takip etmek istiyorum !!!

Give me some data, please. Brake specific fuel consumption, THC before catalyst, brake mean effective pressure, indicated mean effective pressure. Scavenging will ruin your emissions, side forces from piston and guide to cylinder wall must be very high. How do they make sure that the pistons do not move radial? The bottom bearings contact surface are just lines, considering clearances there must be an additional piston guide. I think it is that linear groove on the lower part of the piston. And the spark plug and injector position... spray will hit the liner and there is a reason why almost all newer engines have a center position for spark plugs... This is not a simple easy engine...

@jebise1126

Ай бұрын

doesnt need all that. its engine for one way drones. or maybe torpedoes... small and strong but wont last long. but if only half of engine was used im sure it would be cheaper too

Where’s the scavenging pressure coming from? In an opposed piston two stroke the scavenging pressure has to come from a blower, and that isn’t shown here.

is this engine already in expluatation? in any car?

É interessante o ar entre na câmera de combustão em forma aspiral e tenha a injeção direta. Isso melhora muito a combustão e a refrigeração do motor , esse é o ponto forte do motor Elko que não deveria ser esquecido .

@jonathanblack3

11 ай бұрын

Looking forward to future automotive developments, and a carmaker/s partnership for engine supply agreement

Shouldn't each side to rotate opposite direction

those roller bearings, in the hot interior of this engine, seem me to be the weak spot

I love the idea cruise oil must drop 1.60

Cam track and piston rollers lubrication would be my first concern. Otherwise, this is very interesting and promising. The less moving parts, the better, plus it seems less technically complicated as compared to Achates.

@kopronko

8 ай бұрын

No, ask yourself, How the rotation of the pistons would be prevented, so, that the bearings would run on the exact predicted/constructed path !!! ??? !!!

@josega6338

6 ай бұрын

@@kopronko Wobbing plate, Axial/ Barrel engines, en.wikipedia.org/wiki/Axial_engine had scavenging, cooling, servicing problems. Lubrication is solved just by adding the adequate amount of oil to the right place, at the right time. The 4 cylinder air cooled INNengine has an unparalleled weight to power ratio. SAE reported that under any circumstance, Schnuerle, Loop scavenging for 2-Strokes is better than Uniflow scavenging. In this type of engine, I'd have the intake ducts largest as possible, with no bends, that in Wankel help blocking backflow of mix into intake manifold, in this type of arrangement may add nothing. Size and shape of ports is also important, deserves specific research. For the combustion chamber in big INNengine having best results, it could be carved on piston head, a lot of Diesel experience exists about this. Gesund +

They accidentally made an AC compressor

@michaelwong4303

11 ай бұрын

Yes it looks like the air con compressor in my Citroen XM

Go one step further! Replace the connecting rods with the amazing Scotch Yoke connecting rods.

Why doesn’t Spain start building cars with their new engines and sell them to the world?

@jebise1126

Ай бұрын

because their engines dont work

hmmm..the angle of attack of those pistons is too shallow, friction ans side loads will be extraordinarily high; that is just a converted A/C compressor,most work that way, but with valves and no opposing pistons.

I think this one is a😮 vibration free engine

Waiting for Inn engine to take over Later I'll get one for my car

Its a two stroke not 1

The swash plates will never handle tork and will fail very quickly. 😎

The side thrust from the rollers climbing the swash plate inclines will cause premature and significant wear to the pistons making this concept a non-starter in its present form.

@teardowndan5364

10 ай бұрын

The pistons have a full-length skirt to help keep them straight and there likely are other locating features not shown or emphasized/explained in the animations. Add some sort of bearing at the cylinder base for the skirt to ride on, that takes care of side-loads much like a crosshead design. Journal bearings on a crank shaft have a much harsher life and still manage to last a long time on nothing more than regular oil and filter changes. The piston-cylinder bearing could be as simple as an oil channel feeding pressurized oil between the skirt and cylinder wall. That may even be how oil gets sent to lubricate the piston rings and cool the piston head.

That is really clever.Lots of luck men and women?

So when will one be sold in a motor bike.

This is not a new concept, it's been done before.

@rll9911

11 ай бұрын

When? Where?

@user-in2xu4qj1y

11 ай бұрын

@@rll9911It look like Opposed-piston put in Dynacam Engine / Revolver-Cam Engine .

@mpetersen6

11 ай бұрын

Damn right it's not a new concept. Barrel engines have been around as a concept since the early 1900s. At least. Cam type, Swash plate, Zee Crank etc. By the early 30s when the US Army gave up on them for aircraft use they had blue prints staked to the rafters of a hanger at Wright Field. Failures one and all. In addition Cam type engines with radial layouts have been tried even to the point of reaching the test phase and actually flying. The Chaminez in the US passed government tests and underwent trials by the Navy.

@roquelopez-qc8fn

10 ай бұрын

Muy interesante el sistema,el hermetismo del motor realmente hermoso

@JuhaK71

10 ай бұрын

@@rll9911 T hink this engine combines the swash plate mechanism to the opposite piston 2-stroke principle(Junkers Jumo 205 for example). Nothing really new.

Question is does it roar like a muscle car? 🤔

Life? Who will last 100,000 km?

The Sarich orbital engine is a type of internal combustion engine, invented in 1972 by Ralph Sarich, an engineer from Perth, Australia. It never was a success

Why does the Mazda have a supercharger on it?

@OtisFlint

11 ай бұрын

Because this goofy engine can't even push a Miata down the road.

External combustion Stirling cycle

Use it as an ultralight engine

i need engine, how much dollars

Swash Plate engine - similar to hydraulic pump.

This engine good for moter bike not for car or truck 😊

Too bad is not in production yet. I would be ready to buy one now in my ultralight airplane, wher I need 100 HP. but need to be a light weight engine.

@19piolin82

9 ай бұрын

El de 120 HP pesa 35 kg.

@djal1030

9 ай бұрын

@@19piolin82 pero cuando va a estar disponible?

@19piolin82

9 ай бұрын

@@djal1030 Están vendiendo ya motores de 0,125 cm3 para aviones de radio control. Todo depende de los pedidos. Para coches no van a fabricar por el momento por que ninguna industria del automóvil va a comprar su idea teniendo departamentos que cuestan cientos de millones de euros al año. De momento van a vender para aviones y generadores eléctricos. Están haciendo una ronda de financiación vía crowfunding.

Micro Deltaic / AC compresor...

It’s great in graphics 😊only

Lubrication & cooling aspect is not explained........... Lubrication is the main concerned area, thus the engine service life is expected to be shorter

How much dollars 😊

How much dollars please

Manufacturers can use smaller batteries which will be kinder to the Earth and weigh less, improving efficiency, The batteries won't need to be subjected to Level 3 charging which heats them up and shortens their life, adding to the landfills. The batteries will always be optimally charged for the longest battery service life. All the simplicity of battery power without the range anxiety. For those who live in condos or apartments, hybrid is a necessity.

one way drones... but not the cheapest ones.

😮suppar

So let's see it work in something??.

You really don't need 8 pistons. One can use 4 and get the same amount of power and save on components

Put in a go cart and let’s see what it sounds like ….

1Stroke. นับยังไง

It’s a two stoke isn’t it? What the piston just goes down and stays there? Lol

This may appear to work if turned , But it will never overcome such a small angle wave drive plate to turn itself effectively

Is this real?

@19piolin82

9 ай бұрын

Si. Y funciona.

The Challenge of Supercharging is solved, if you don't use a piston to compress. intake and expansion should be one stroke. A Wankelesque Trochoid Engine should drive a turbine, and a Tesla Turbine should recover the energy produced.

Cool, a motor for swap my Fiat 126 😂

ถ้าเป็นมอเต้อไฟฟ้าไม่มีสะโตรกแล้วรอบจะดีกว่านี้ครับ

2ストロークに見えるけど？ 1ストロークはピストンの上下で爆発しないと1ストロークに出来ない

2 stroke x 1 rev x 2 p = .5 stroke

A squash plate, opposed piston two stroke, nothing new.

2 stroke

1 stroke? Where? This is a 2 stroke engine, 1 stroke engine is a Jet engine.

What about efficiency? Scavenging looks questionable.

Nothing new ,a swash plate opposed cylinders. Many aircondition compressos work the same . Junkers and Napier in europe/britain operate the same way during WW2

Rankine cycle

It's not 1 stroke. A turbine is 1 stroke

It's a 2 stroke engine. I have big doubts about its area of use. the transmission of the torque produced is really not ideal. and I believe that this engine had been tested on an MX5 with the addition of a compressor, not NA. In short, it seems to me to be yet another hoax.

2 stroke*

Too much smoke without any dyno tests. No info about max/idle rpm, about max torque (150 or 160 nm?) rpms on their site. No info about reliability. And it's 2S engine sure, not 1S.

It is not 1 time because intake and exhaust happen at the same time, th n compression and than ignition. So, 3 times...

@BlindingSun_

3 ай бұрын

Two

It’s just a swash pump engine, nothing remotely new . I drove a prototype car from a major manufacturer powered by one of those thirty years ago. Very smooth, but poor torque and fuel economy.

There's no one stroke not possible

Too complicated and missing free pistons!

It's a 2 stroke..

Every combustion is a waste.

This should be reported to KZread for false information no such thing as an one stroke

Encore un projet de moteur 2 temps dérivé, j'espère que personne n'a subventionné cette technologie déjà morte dans l'oeuf.... le moteur 4 temps a pistons alternatifs a encore de tres beau jours devant lui, diesel ou pas....

This engine is not suitable for boat ⛵⛵⛵

Airplanes need 175hp. This engine is too weak

Axial engines have been around for more than a century, and never a success. The power estimation is overly optimistic.

Too late, the environment has no more time. We should have stopped using fossil fuels by now.

@magnustheman524

11 ай бұрын

You'll condemn hundreds of millions to starvation. If you really think this is an option I ask for you to go first, for science.

Waste technology