350z/G35 DE Valve Cover Gasket replacement, the Ultimate Guide

Автокөліктер мен көлік құралдары

This video is a step-by-step guide on how to replace your 350z/G35 DE valve cover gaskets! In this video, all of your questions will be answered! This video is an updated version of a previous video that I had already posted, because it got a music copyright strike.
Music by: Epidemic Sound
Music by: www.davidcuttermusic.com / @dcuttermusic
Music by: Joakim Karud / joakimkarud
Music by: / lakeyinspired
Music by: Epidemic sound
Mountain Wrench set: amzn.to/3PfKD63
Mitzone Aluminum valve covers: amzn.to/43b6AZK
Inch pound torque wrench: amzn.to/4a5CYiz
Foot pound torque wrench: amzn.to/4aa7RCN
Why I stopped running a PCV delete: • What's better, oil cat...
303 Aerospace Protectant: amzn.to/4caW34G
Craftsman 230-piece metric tool kit: amzn.to/3v3LWy2
Follow me on Instagram@: zspeed2
Contact me @: zspeed2561@gmail.com

Пікірлер: 15

  • @killerkennyas
    @killerkennyas4 ай бұрын

    DMn I was looking for the other video and couldn't find it..good timing..

  • @killerkennyas
    @killerkennyas4 ай бұрын

    Hey me.and the son and your video and the Haynes manual really helped us get it done..salute for making a proper video

  • @Zspeed

    @Zspeed

    4 ай бұрын

    Thanks so much for watching!👍🏁

  • @killerkennyas

    @killerkennyas

    4 ай бұрын

    @Zspeed No.prob..hey ingit a question..dunno if you.can help..we did valve covers.and gaskets,plugs and coils..everything was fine last night and this am when he went to.work..then on way home from work these codes p0300.multiple misfires.and p0011 camshaft sensor A,timing over advanced..now that drivers side sensor pigtail broke.and we spliced one on...any suggestions? I really don't wanna take to shop and pay exhorbant amount of money,but I'm stumped..fml..and question,are you self taught or donyou work or own a shop? Sorry for all the questions

  • @Zspeed

    @Zspeed

    4 ай бұрын

    Replace camshaft position sensor A first, use genuine Nissan parts from Z1 motorsports. If that doesn't work, check each coil pack for possible failure! Hope this helps!

  • @killerkennyas

    @killerkennyas

    4 ай бұрын

    @@Zspeed tha ks man..I'm also leaning towards a vacuum leak

  • @Justin-hz8bh
    @Justin-hz8bh4 ай бұрын

    Yeah I'm going to have to do this sooner or later. I keep eyeing the red cover you see on Amazon but just don't know about their quality. On the other hand, the OEM ones are very expensive.

  • @juanarenas1145

    @juanarenas1145

    2 ай бұрын

    Apex, they make for Nissan and don't have a ridiculous price...

  • @saucydijon9514

    @saucydijon9514

    11 күн бұрын

    I just did it it wasn't that bad. I got the white aluminum ones from Amazon and I mean the quality could be better but I definitely wanted aluminum and they look good on there cuz you can't see the minor defects

  • @claveecl1564
    @claveecl15644 ай бұрын

    I was literally planning on buying valve covers this month, perfect timing before buying them. But I wanted to ask did u buy new oem headlights? Because I was planning on doing the same since mine are pretty bad

  • @Zspeed

    @Zspeed

    4 ай бұрын

    Yes, OEM headlights for the 03-04 350z have come way down, under $200 each!

  • @Lvcids
    @Lvcids2 ай бұрын

    So I just replace my valve covers, spark plugs, all the gaskets for the intake manifold and I went to start my car and it turns over and runs but every 1-2seconds my exhaust is popping? Is this because of improper ignition coil connections? I’m stuck

  • @Zspeed

    @Zspeed

    2 ай бұрын

    Sounds like one of your coil packs may have gone bad after being placed back on the spark plugs, that happened to me too. Disconnect the coil packs one at a time. If you get to the bad one, nothing will change, but if it's good, it'll run even rougher when disconnected.

  • @reddeder-xr7eu
    @reddeder-xr7eu3 күн бұрын

    for someone thats never done this how many hours are required total remove and install valve covers...it looks like its quite a bit of work and labor

  • @Zspeed

    @Zspeed

    3 күн бұрын

    Give yourself at least two days, so you can take your time! Putting everything back together was easier than the disassembly process!! You can do it 💪!

Келесі