The noise you couldve been hearing on start up could be your bushing in the alternator going bad, i had my VVT kit replaced in the hopes of stopping the noise but turns out it was the alternator all along, the clutch pulley was done and so were the bearings. Not a hard install but 2 people help.

Nice vid awesome car sim build other then ur turbo and fmic and car color mine velocity red cobb fmic and stock turbo still but I got cs bushing shifter and plate and corksport big mouth hood scoop and rear carbon wing w and extension and garage very grill but I run stratified pop and freektune but got the weight u need for ur shift plate from cobb I'm running cs but did u do the high pressure fuel pump jw

Those mudflaps alone must add +5hp per corner!

@TomCanino

5 жыл бұрын

Nah they’re Rallyarmour, +7!

I’ve been having issues with my Eonon head unit as well. Mine every about 7th time I start the car it won’t turn on and I gotta unplug the power cable and plug it back in

@TomCanino

4 жыл бұрын

I know what you’re talking about the same thing happens to me except I’m not sure if it’s every 7th time. If you wait like 5 minutes eventually it turns on ive tried resetting it, updating it, can’t figure it out

What oil do you use?

Hey bro! Where did u got the screen sound sistem? I want it, thanks

@TomCanino

4 жыл бұрын

It’s an Eonon Android headunit you can purchase on Amazon!

What where your 0-60 and 1/4 mile times?

Hey Tom! I have a gen 1, Currently has everything to get me to that 350 whp mark except for the 3.5 inch intake. (I've got a short ram air intake) Currently on 93 I'm running 21 psi tuned with PD-tuning. I'm curious to know what the boost pressure is with the 3.5" intake to get you up to that 350 whp mark? Cheers!

@TomCanino

4 жыл бұрын

Hey man thanks for watching the vids! I was pushing around 22psi on the CS turbo and was around 350whp!

@teigensuton5523

4 жыл бұрын

@@TomCanino perfect, thanks for the response! Looking forward to seeing your whip get back on the road! 😄

Get a open mouth grille..itll look good with the front mount..also what about the timing chain and vvt..did you end up not having to replace

@TomCanino

5 жыл бұрын

Ended up not having to replace it! The chain was tight at tdc and the pulleys had ‘C’ on them which is the latest update for the vvt kit. So turns out those marks are from the original VVT but was replaced by the original owner!

@jb6574

5 жыл бұрын

@@TomCanino so what was the noise your buddy was hearing that sounded like the chain hitting the valve cover?

@TomCanino

5 жыл бұрын

lol_ speed3 not sure on that one, but there is some slack when the chain is not at tdc which is normal. At tdc there is no slack at all!

How much did all of your performance mods set you back?

Can you do a review on that Eonon unit and your issues with it? I want to get one but most reviews I see online are ones with like android 6.0. Want to see if the cons are worth it.

@TomCanino

4 жыл бұрын

Definitely! Meant to make a review on the Eonon Unit and then my car blew lol. I love it but i hate it at the same time. I’ll make a review next week!

@rotarynerd

4 жыл бұрын

@@TomCanino thank you!

What exhaust is it exactly??

looking to get one in a couple of months 😁 can't wait. awesome car to own...

@TomCanino

4 жыл бұрын

Love the car! Unfortunately for me I blew a hole in the motor so I'm in the phase of getting one built now haha. Engine is practically done just a few odds and ends then it's time to tear her apart and get that engine in! Shooting for 500-550whp with some port injection! Stay tuned haha

@ethadon1

4 жыл бұрын

@@TomCanino nice brother can't wait to see a video on it. hope everything works out great for ya.. definitely keep me posted fam take care thanks for the response.. Mazda life 💪

@TomCanino

4 жыл бұрын

Eliseo L.M.G. Thank you for the support on the channel bro! 🤘🏼

love it bro!

@TomCanino

5 жыл бұрын

🤙🏽

I'm from the concord, nh area and am looking for a cheap sporty DD any thoughts of where to look and what to look for?

@TomCanino

5 жыл бұрын

Obviously I’m going to suggest a speed 3 lol but that’s just me

@Rosszy305

5 жыл бұрын

@@TomCanino where did you find yours?

@TomCanino

5 жыл бұрын

@@Rosszy305 I found mine on Car Gurus at a small dealership

@rodrigosuarez586

4 жыл бұрын

Mazdaspeed 3 bro! After test driving a GTI, SI, focus ST, and WRX i ended up buying my genpu. Definitely a "drivers" car. It is so damn raw, you'll love it.

@raquielcross5757

4 жыл бұрын

Check on carcomplaints.com and you ll be amazed by the quality of mazdaspeed

dyno chart?

@TomCanino

3 жыл бұрын

It’s on my Instagram @tomcanino_

@shanemouton7606

3 жыл бұрын

@@TomCanino only shows your dyno after you rebuild when the block shredded... thats the 531 reading, nothing i can see before apart from some decent parkour clips...

@TomCanino

3 жыл бұрын

Ooh haha, i didn’t have the car dynoed when it had the mods in this video, but my tuner said it should have been around 350whp

@shanemouton7606

3 жыл бұрын

@@TomCanino sweet the reason I ask is because you have some variation on what I have and I think I am going to be about 300-350whp now, going to dyno soon after remapping and revisions from Freektune. Im in a 2012 with Cobb Tuning SF Intake & Turbo Inlet Hose as well as Torque Solutions Recirculating Hose, Autotech HPFP, Corksport 3" TMIC, Stock Turbo with Corksport tubing, Go Fast Bits BOV, Cobb Tuning GESI Downpipe and Cat Bat Exhaust. Am tuning 91 (California sucks for that) BUT I am going E85 as well so this should close the gap to your turbo hop up and hoping for similar numbers. Was hoping to see the dyno so I could see what to expect... Should be very similar to you here... From this video to 531HP, I see the exhaust manifolds, what else had you done there? You built the motor with conrods and pistons did you? Any other bolt ons?

@tmillner0682

3 жыл бұрын

@@shanemouton7606 I have a 2012 with a BNRS4 on meth and e30. Before I went to the bigger turbo, I was around 320hp with e30 on stock turbo, same as BNRS4 on 93. Not sure if that helps

Nice

You probably forgot about your HPFP and your spark plugs?

@TomCanino

5 жыл бұрын

sharb212 oh i forgot about that! Autotech HPFP internals (first thing i did!) and i have the NGK Iridium 6510 spark plugs (one step colder) 😄

@Checkers_123

4 жыл бұрын

Tom Canino Where they pre gaped? Or did you have to cap them ? If so what is the gal size?

@TomCanino

4 жыл бұрын

Your tuner will tell you what to tap them too, but typically .026-.028 is what I’ve tapped mine to. You’ll want a tool to gap them!

I just raced a built 3 in my built 04 250hp mini , I barely won but it was no 350hp 3

@TomCanino

4 жыл бұрын

adam s i consider “built” a fully built motor haha what do you consider built?

In Germany TÜV say no to 90% of this mods XD i know it i come from there.

Did you blow your motor running this setup?

@TomCanino

4 жыл бұрын

This setup + meth. I think my issue was torn injector seals though

@juice610

4 жыл бұрын

@@TomCanino okay i see. Thankss

Do you have it tuned currently to 350hp ?without the aux fuel or this is actually right now?

@TomCanino

4 жыл бұрын

That’s just on 93oct. With the meth I’m around 400whp and 380 torque! Been meaning to make a video about the meth kit but been so busy!

@raquielcross5757

4 жыл бұрын

Ok sounds good, its really good numbers without the aux I'm thinking

@TomCanino

4 жыл бұрын

My engine blew before i had any issues with the tank hahaha

@TomCanino

4 жыл бұрын

I saved my pennies throughout highschool and pulled the plug Senior year of college! They’re great cars if you treat them right

Where did you get your wing extension?

@TomCanino

5 жыл бұрын

From a homie for cheap! It’s an eBay brand i believe. Like $50? $60?

Ben Affleck, that is an ugly lip on that grill. Great mods though

@TomCanino

4 жыл бұрын

lol what

Says get rid of your Cobb system. Has a Cobb system. Says you need one to mod your car.. lmao

@TomCanino

5 жыл бұрын

I said throw away your ots tune, not the accessport. The accessport is the tool you use to load tunes and record logs lol. The pre loaded Cobb tunes are trash but a pro tuner will send you a file to load on to your ecu via an accessport.

This guy is so agitated...no offence 2:23