Hey ADVinJapan, sending love for your content from India. I own the same bike, well the 2023 version and the brilliant Prospec guys actually work out of the same city that I live in. I had the benefit of visiting them and their recommendation is to route the clutch cable from the right of the ignition key to further reduce any kinks/bends and therefore binding in the cable. Also, they recommended going for the Prospec Pro short cable version of the EasyClutch which basically plugs onto the OEM cable for easier replacements for when your clutch cable lets go.The extra length also allows my bar risers.

@advinjapan

Жыл бұрын

Hey thanks a lot! This is great advice. I contacted them and they’ve also been super kind enough to send me a shorter cable. I may do another video showing how to use it with your existing cable as well. Great advice, brother, thanks!

@regressumdiabolus

Жыл бұрын

@@advinjapan Awesome! Glad to be able to help.

@maykilcordon

Ай бұрын

@@advinjapan Hello! Were you able to do and install as you said?

@advinjapan

Ай бұрын

Hi, actually I went back to the longer cable period the shorter one didn’t quite work out.

Be careful with reducing the pull (or increasing the leverage) too much. As you make the lever pull easier, you reduce how much the clutch arm moves. At some point you will either be not engaging the clutch fully, causing it to slip and burn while riding, or not disengaging the clutch fully, causing it to rub and burn while stopped, or both. Make sure that the bike doesn't creep forward when the clutch is pulled in, and that the cable has some free play when released. And try it with your fingers holding the grip when pulling the lever since this will limit how far you can pull the cable. Hope it works well for you.

@advinjapan

Жыл бұрын

Thanks for the advice bladerunner, yes, I made sure there was no creep on the bike. It’s looks like everything should be alright m. I’ll keep an eye on it

一度交換したクラッチアームをSTOCKに戻して4ケースすべての調査完璧です。勉強になります。ありがとうございます

@advinjapan

Жыл бұрын

Thanks Nokotanu!

Nice breakdown! Appreciate the details.

@advinjapan

Жыл бұрын

Thanks Mok3 as always👍.

Congrats for the video🤝🏻

@advinjapan

Жыл бұрын

Thanks Cristian! I hope it’s helps👍.

I wasn't aware of this mechanical advantage mechanism. Thanks for all of the work you put into this video. For anyone in the US it comes out to about $68 with shipping and a extra cable. Hopefully no customs hold ups or charges.

@advinjapan

Жыл бұрын

Either was I, thanks to this awesome community, I was made aware. And I’m glad to be able to share it all with you. Thank you for the info on shipping, super helpful 👍.

That's is crazy light. Wow.

@advinjapan

Жыл бұрын

Any lighter and I’m afraid the torque of the engine would pull the clutch lever in 🤣

@RonOrud

Жыл бұрын

@@advinjapan Now for the little shorty levers.

@advinjapan

Жыл бұрын

Yes, I’m tired of getting pinched fingers. Any recommendations?

@RonOrud

Жыл бұрын

@@advinjapan unfortunately not yet. I think Ali Express had some I thought about trying. I have had good luck with some of their stuff. (Love the Rhinowalk tool bag you recommended)

@advinjapan

Жыл бұрын

Yes, that tool bag is legit 👍

Nice one. Quick request. Could you post the action camera and mic setup you use for these POV videos

@advinjapan

5 ай бұрын

I sure can. I just updated my setup so it’s probably a good time to do that.

@advinjapan

5 ай бұрын

Hey, I just updated the information, but I’ll let you know here: Filming Equipment: GoPro Hero11 Purple Panda lavalier mic

@virajvrooms

5 ай бұрын

@@advinjapan Thanks for sharing 🙂. Also, do you use a head strap mount for filming the POV videos? I like the idea of keeping both hands free.

I was not sure about the prospec system , eventhough it is an Indian company, all the videos before on this were just verbal non convincing that's why i didn't mention it last time .. but this one is more convincing and very well done :) .. So i take back the hydraulic clutch reccomendation and I myself will be buying the prospec plus one finger arm combo :D..

@advinjapan

Жыл бұрын

Alright! Glad I could be of service my friend. It was hard to find anything on the easyclutch, but the concept seemed pretty legit so I gave it a go. The company is very nice too, good communication.

@Hkmmotologs

Жыл бұрын

@@advinjapan some of their other accessories are amazing too like the crash bar mounts for various accesories :)

@advinjapan

Жыл бұрын

Agreed!

Regarding the clutch free play kzread.info/dash/bejne/haGg19KJp6uXpLA.html

@advinjapan

Жыл бұрын

Thanks ZeroG

I do appreciate these videos but the reality is your showing me Im making all the right choices for me. All the cheap mods are worth it on this model bike to just make it that little bit better. Anything more is just not. For me. If Im gonna spend 7K on the bike and another 4K on mods for what a 10% better experience? Then there are other bikes up in that price range that are 200% better experience.

@advinjapan

Жыл бұрын

Thanks Mike, yeah, to each his own. If you really feel happy with it, more power to you👍.

Does the prospec easy clutch in anyway hamper the clutch plates in the long run ? Your opinion?

@advinjapan

7 ай бұрын

Hey upload, if by hamper you mean wear down, then no. The mechanism simply reduces the load at the lever. Cheers!

Did you tried the pro plus of this model? And will it caused gear change little tight?

@advinjapan

3 ай бұрын

I have not tried the pro plus. I haven’t experienced any tightness in the gear change.

Hi I have a question because I am from Poland and have limited access to some parts tell me where you ordered this Prosper Easy Clutch Pro+ cable for KTM 390 Adventure from ?

@advinjapan

4 ай бұрын

No problem. I post links for everything in the description so be sure to check that first 👍. Here’s the link: prospec.co.in

@czysiek79

4 ай бұрын

@@advinjapan I was on the site from the link . Only there I saw that for the clutch they are 650cc , 750cc , benelki , ducati capacities . Could you please write which device you chose ?

@advinjapan

4 ай бұрын

@czysiek79 hey there, the clutch cable is a universal design for all motorcycles 650cc and below, so this will work with the 390 👍. I recommend the pro plus: prospec.co.in/products/easy-clutch-pro-plus.

Hey Buddy!! How is this mod holding up? For my Duke 390 planning to pair this with a 2 finger Easy Pull V4 Clutch Lever from '1FNGR'. Any ideas??

@advinjapan

11 ай бұрын

I haven’t had any issues with it at all. It’s been a life saver in longer rides.

Hey Buddy!! How is the Easy Clutch holding up? For my Duke 390; Planning to pair this with the 2 Finger Easy Pull Clutch V4 Lever fron '1FNGR'. Any ideas?

@advinjapan

11 ай бұрын

Hey, yeah, the more the merrier🤣

@2-WheelsMoveTheSoul

11 ай бұрын

@@advinjapan 😉

Does all the mechanical advantage change the throw and how far you have to move the lever to hit the friction zone? Are you going to cut the lever? Whenever I pull the clutch lever in all the way, the end hits my 3rd and 4th fingers.

@advinjapan

Жыл бұрын

Hey H M, for the first question, if I understand what you’re asking correctly, in short, no, the install didn’t change where the friction zone was much at all. I changed it with that dial on the stock levers. 5 will put the friction zone closest to your handle bar and 1 the furthest. I believe I have mine at 2 or 3, where as before it was at 4. So my friction zone lays further from the handle bar, meaning I don’t have pull in as much. If you have monster fingers like I do, then maybe somewhere around 2 or 3 would be good, but I still hit my other fingers when pulling in the lever. For your second question, yeah, I may pick up some aftermarket levers to help with that. Do you have any recommendations?

@blastradiu5

Жыл бұрын

@@advinjapan I've been waiting for ASV shorty levers but still nothing. I like the ASVs because of their fine adjustability instead of just 5 or 6 positions.

@blastradiu5

Жыл бұрын

@@advinjapan I have just cut the stock levers on other bikes. Only thing missing is the bulb on the end.

@advinjapan

Жыл бұрын

I will check these out, thanks H M 👍

All things considered, if I'm buying just 1, do you recommended the ali or the prospec?

@advinjapan

Жыл бұрын

Thanks for the comment. As the chart suggests, prospec will give you the better advantage here. Be sure to watch the whole video, there are some things to watch out for if you’re running the stock clutch arm with the easy clutch pro.

Why?? My 2023 model (SW) is ridiculous easy to move the clutch, maybe I would like its little more stiff!

@advinjapan

6 ай бұрын

To each his own. Personally, I struggle with tendinitis, the lighter the better. Also, a lighter clutch pull, in theory, will give you finer, better control over the drive train.

Does this matter if one's bike has QuickShifter+ enabled?

@advinjapan

11 ай бұрын

Hello! Yes is does matter, partially. While the clutch lever is used to shift the bike, it is also used to manage power to the rear wheel. And the easier the clutch lever is to pull, the better clutch control you have. Also the quickshifter, at least on my bike, is also very jerky in the lower gears so I prefer to use the clutch when possible. Thanks!