Thank you for watching this video. If you have any questions, please leave a comment.❤

@user-md2dp5rp3t

Ай бұрын

Muy.buena.bicicleta

@RichartPedalysudor

Ай бұрын

😂woo esta ñema ñema la 🚲 bici me facina así uyo clásica con componentes modernos Eeee ñio😅😂

@akissawodims

Ай бұрын

Beautifull work. What IS tool's name at 3'51 ? Do you have a link for us to buy le red handelbar'cover at 12'12 ? Thanks from France.

Good as new, another 30 years service. I always say the joy of cycling is only determined by the efficiency of the bike not how new it is or what its made out of.

What a beautiful bike, love the old steel frames so comfy rides

Perfect groupset for a beautiful frame

Im kinda new to cycling, well actually I got back into it after 20 years, not to diminish your great work but there wasnt much to restore in the first place

I took a break from restoring the Ural bicycle from the USSR, fighting an unequal battle with seized screws. I'm browsing the depths of the Internet and come across your recently uploaded video. Immediately the inspiration returned. Greetings from Poland.

@user-om4lh2cg9c

Ай бұрын

As Akella said in the Soviet cartoon: it was a good battle. I am now in the middle of the restoration of the 1959 V-33 "Tourist" made in the USSR.

@user-bc2fh2vn5w

Ай бұрын

I also have one Future projekt - obtained one old road frame. Haven't started yet, but as you say "good inspiration". I love the feelings when I finish. To give new life to sth what almost ended in scrapyard = Priceless❤

Beautiful restoration ❤

Complimenti ottimo lavoro 👋👋👋👏👏👏

도색 및 작업 문의는 네이버 '코멧공방' 검색부탁드립니다.

Классный велосипед! Лайк. Обмотка руля прям красота, хочу себе такую же!

I redid a handmade Bianchi. I love it. And yes, it was a quite old frame, 300 mm rear end. 100 mm front end. 7 speed and it is beautiful. I don't Miss A 12 speed . And yes, it's a steel frame. I love the steel.

@the6ig6adwolf

2 ай бұрын

A 300mm rear end? That seems very unlikely.

@JosephDredd31

2 ай бұрын

I'm sure he ment 130mm rear hub spacing not 300 ​

세상에 진짜 이쁘네요! 복원인가 싶었는데 생각보다 깨끗하고 관리가 잘된 차구나 하고 감탄하던 중 구동계 업글이었다니! ㅋㅋㅋ 근데 또 캄파가 잘어울리니 최고네요!

Великолепная работа изумительное изделие тяжелый труд -- БРАВО ,

I appreciate that you have no problem hitting something with a hammer 👌

Repair?! looked newer than all my bikes at the start 😅

Bravo veske majstore.

I usually bin caged bearings for loose bearings also get more bearings installed as well.

Una bellissima Bicicletta 🤩❤️

This is therapy.

Nice 90s Bike 🤩

Very nice upgrade and restoration. I am doing something similar upgrading my 95 Marinoni from 8 speed Athena with other upgrade components to the beautiful silver 11 speed Centaur. Also going from Mavi Open Pros to Camapgnola Scirrocos.

lovely rebuild as always. I'm so glad you didn't strip and repaint that awesome frame, but why didn't you reuse the crankset which is just fantastic?

3:35 - A few minutes in and, wow, that's a diverse set of components.

Beautiful bike! Great job! What bar tape did you use?

Preciosa bici. Enhorabuena🎉 Cuadros de acero forever. Compartimos hobby. 😊

When I started to see this video I thougth to myself " oh my god another beginner destroyeing a bike" but when I saw campagnolo groupset I said to myself "this man knows what it is doing" and rigth, he knows.

이건 예술작품이다..

Amazing !!!!

Honestly I think every bike deserves to be repaired some see bikes as a tool or even there only form of transportation they are more the a recreational thing. Bikes are awesome.

Great Video, I enjoyed very much that you displayed all steps in detail. One question to COMET: assuming that the original rear hub had a width of 126mm, you did have to widen the rear triangle in order to fit the 11s rear wheel hub, is that right? thx

Nice!

Nice video. Saludos!

montaggio spettacolareeeee

Beautiful work! Love the build. I have a question. I own a 2007 Lemond Buenos Aires road bike. Is it viable to put a modern 105 or Ultegra group set on it?

Definitely!

Cuánto peso la bicicleta ya restaurada? Ya se extrañaban tus videos

If it´s a premier set of Columbus tubing, yes, it´s worth restoring. Rgr

What a beauty ❤

Excellent video. Thank you. I would have named it 30Year Old Italian Bicycle - Upgrade. But nevertheless the content is superb.

@COMETRESTORATION

Ай бұрын

😌

지금도 상태 좋은데요 30년 된거치면 관리 진짜 잘했네요

had to be campag for a beautiful italian frame 👌still think a rolls saddle maybe 🤔lovely restore 🚴wish I still had some of my old classics.

크리몰리 프레임~흔한 카본 프레임과는 확실히 다른 매력이 있네요. 구동계를 은색으로 했으면 더 멋졌을듯...

I missed you so much😘🥲

How is it possible, the condition of parts of the bike is nearly perfect after 30 years life. İt is really true, the quality is not expensive.

They don't make bikes like that anymore.

Nice video. At 0:45 You are not obliged to take out the pin if you want to reuse the chain because it's qite difficult to plae it back in place. The best is to count the turns of screw that you give : approx. 4.5 turns to keep the pin just in the link. Maybe the bike is just too modern after in my opinion.

Definitely worth

I have an old olmo I picked up years ago that had been resprayed badly I'm thinking of stripping all the components and redoing the paint and stickers

Is this a rhetorical question? This beauty has been barely used, so it is worth every single drop of sweat. Mix of Campy, Shimano and Suntour parts is typical for this period.

Can you do a fixed gear one? I really love fixed gear bikes because they're so simple and clean, no cables and brakes just plain bicycle.

@COMETRESTORATION

2 ай бұрын

If i get a chance, I will upload a video.

Given that's a Rossin then yes of course its worth restoring. I have a couple with Potenza, nice machines.

NICE i want it

Che spettacolo

Yes worth it class bike

I see a lot of specialty tools being used I had to watch that bottom bracket come apart I was just waiting for the junk to come out. I have a lot of the tools I saw spanner wrenches etc. I don’t think new bikes even use anything like that anymore.

멋지내요

LEMBRE-SE ! ITENS DE SEGURANÇA, NÃO SE RESTAURA. "SE MELHORA" SEGURANÇA EM PRIMEIRO LUGAR.

The shape of that bike frame is like the manila animal jeprox😊🎉

Did you have to reset the rear dropouts to take the 130mm hub? Why did you remove the Columbus sticker? Why did you take out the headset races?

Before the bike I need to get the tools 😅

👍❤️

А смысл?Я понимаю если бы сохранилась оригинальная комплектация.А так,это новый groupset на старой стальной раме,которую внутри,уже скорее всего съела коррозия.

tops

Bisiklet aynakol mekanizma ve fren ayak sistemi eskisi oldukça iyidi onu kullansaydınız daha iyi olabilirdi eski parçalar daha kaliteliydi

👏👏👍

hhe should just make it into a fixed gear or something or add sti?

Gonna sell it? Nice

Linda demais

😮😮👍👍👍

От старого велосипеда осталась одна рама,это не реставрированный байк.Все компоненты новые.Это не восстановление,а реплика.

🎉

The old chainring was better? Why change it

Any Rossin is worth fixing

@COMETRESTORATION

2 ай бұрын

😘

Mmm .. that bike hadn't spent much time on the rubbish heap. Nice result even so.

Cassette looks dirty after the lube. You need parafin wax of cause

Will you please give away any road bikes please

Emang sepedanya sudah bagus. 😂😂😂

Hm,sehr originell ist das nicht. Jo, dem rennrad ein upgrade verpasst. An sich eine gute idee,aber das machen viele.

Hubiese cambiado el manillar por uno más cómodo

ㅡ..ㅡ 어디를 보면 30년된 자전거? 허위

No, send it to me please and thank you.

Uncle gave me this bike when he got a new bike back in the 90’s. Rode it everywhere for years until the colored kids stole it from Burger King while I was eating.

So let's see. You took apart a great old bike and replaced perfectly good components with new components that don't match the frame. I'm not seeing the magic here. Neither a repair nor a restoration.

Give me bike bro

Is your goal not to spend any $ because I woulda probably just replaced the bearings at least. But your very meticulous.

And not a communist grey looking carbon tube in sight.

Nope.

Can i have it?