Am I gonna need to wrap my ethernet cable around my phone for this

@hman6159

Жыл бұрын

Lol

@WaWfan64

Жыл бұрын

Infinite solutions?

@TailsGuy72

Жыл бұрын

Cultured reference.

@clementpruvost8670

Жыл бұрын

No and I've got the reference.

@thegeekno72

Жыл бұрын

I don't get it

"It may look potato, but at least the game play tho" that was both funny and kind of cringe lol

@oftankoftan

Жыл бұрын

it wasn't cringe. You just suffer from Cringeitus. It's where you've assimilated too much online meme culture and hasn't socialized outside with real people enough - that things that aren't cringe appear cringe.

@hayoun3

Жыл бұрын

​@@oftankoftan Wait a minute... Who are you?

@superpork1superboy771

Жыл бұрын

​@@hayoun3Martin Boson

@nicholasdavidson1191

Жыл бұрын

​@@oftankoftanthis was cringe.

@highqualityorangejuice420

Жыл бұрын

​@@nicholasdavidson1191another suffering soul

The tip about lowering textures down is absolutely criminal. Textures are the best bang for your buck for the fps cost per quality increase

@lloydaran

Жыл бұрын

Also, their cost is mostly paid in terms of memory and, if you have 6 or more GBs, at 1080p you will be fine using Ultra quality textures with most games.

@Gren4te

Жыл бұрын

I was gonna say. Aren’t those heavily memory dependent? Any 4gig+ card would work with high quality textures for 1080P right? Shadows and AA can definitely F off but, textures… they kinda make the game look good.

@epmcgee

Жыл бұрын

Only on VRAM limited machines

@epmcgee

Жыл бұрын

@@Gren4te some triple A titles need 6 GB minimum for high/ultra textures even at 1080p.

@Klar

Жыл бұрын

@@epmcgee Yeah

There are countless other graphics settings (like bloom and reflections) that you should try turning off before what they recommend. Higher quality textures will give you better bang for the buck than almost any other setting, as long as you don't over-extend what your GPU's memory can hold. As for anti-aliasing, don't turn it off entirely, but keep it at a very minimal setting; it helps a lot with the quality and you get most of the benefit with the fastest settings.

@janisir4529

Жыл бұрын

For AA, just use TAA and avoid MSAA. Though it's been a while since I saw any games with MSAA.

@filedotjar

Жыл бұрын

@@janisir4529 I typically see just TAA and FXAA

@sigmamale4147

Жыл бұрын

Bro this is so much wrong lol. With graphic settings its just personal preference

@ChristopherHallett

Жыл бұрын

Yep, textures and shadow quality are the most important setting to try and max.

@lloydaran

Жыл бұрын

@@sigmamale4147 Absolutely not, some settings have a huge impact on performance, shadows are a bright (pun not intended) example. Preference about visual quality, sure, but we're talking about boosting FPS here.

Me who does all those things and still gets 4 fps: "Maybe I need a bit of spending"

@madlad_don2387

Жыл бұрын

I feel this comment more than I should.... being broke sucks

@madlad_don2387

Жыл бұрын

@@pixels_per_inch yea this realization made me feel rly stupid when it happened to me once

If you really want those extra frames, try playing at 144p

@Jaydan7709

10 ай бұрын

how

@zidxan6821

8 ай бұрын

lmao

@kunalgaulkar1560

3 ай бұрын

Yes 🙂

@henrikfox8960

11 күн бұрын

on a phone

"depending on which gpu you use" i lost it in there

@fragariasec

Жыл бұрын

Not that hard ;)

@martin0499

Жыл бұрын

Integrated graphics moment

@EliasTHELOL

Жыл бұрын

For Nvidia ggs you need rtx 2000 and up But for AMD you can use fsr on a AMD Radeon integrated graphics Vega 8/Vega7/vega11 and it goes on

@toxicturkeyy

7 ай бұрын

​@@EliasTHELOLmany nvidia cards work with FSR too.

Step 1: Lower graphics settings Step 3: Same as step 1

@baadlyrics8705

Жыл бұрын

No? Watch the video again

@1996Horst

Жыл бұрын

@baad lyrics he is right tho. DLSS is nothing else but turning down your resolution. Which is infact the same as "turn down graphics settings"

@xiao_slayer1013

Жыл бұрын

@@1996Horst how is overclocking and increasing power limit “turning down graphics settings

@1996Horst

Жыл бұрын

@xiao_slayer101 where the fuck is he talking about an OC? It is about enabling DLLS. Which is upscaling technology.

Undervolting alongside OC is also a no-brainer.

@Axiarus

10 ай бұрын

This. Overclocking by itself is just a dated thing to do.

Please dont overclock if you have a gaming laptop though

@hman6159

Жыл бұрын

Lol

@bradhaines3142

Жыл бұрын

depends how temps run. you can underclock the cpu (depending on the hardware) and oc the gpu since almost no game is cpu heavy these days i have an 8th gen i7 that i capped the boost at 3.6 instead of 3.9, and with that i got another 10% out of my 1070.

@mingyi456

Жыл бұрын

@@bradhaines3142 Games can become cpu heavy with newer more powerful gpus at lower settings, even in laptop settings.

@bradhaines3142

Жыл бұрын

@@mingyi456 yeah at lower settings. you gotta find the balance based on your hardware. and if you turn up graphics settings, that makes them less dependent on cpu. if you want to run games at 1080p just stick to 10 series, theyre perfect for it. if you have anything newer, have a better display. i got a 4k120hz screen to go with my 3080, i just wish i got the 12gb instead of 10.

@clyxos3405

Жыл бұрын

@@bradhaines3142 At this point, games like warzone 2 have actually managed to bottleneck my CPU (i5 11400) on my 2060 super

My pc I used for 13 years had no graphics card, just the built-in ones on the cpu. I could barely run anything, but I remember turning all the setting on rocket league to the minimum, lowering the resolution, and still getting a whopping 12 fps. Pretty proud that I climbed to diamond with it.

You forgot making sure your RGB is set to rainbow spectrum cycle. That gives the most FPS.

@Collin_J

2 ай бұрын

Wait I thought I was supposed to make it look like flames or racing stripes?

Expected him to also add the important step of checking for artifacts with furmark

What I usually do is normally turn shadows to the lowest setting helps allot

Undervolting would be a good Recommendation

Additionally, you can use overclocking tools to undervolt and reduce temperatures, while boosting performance at the same time since the card is less likely to thermal-throttle.

in the case of dlss/fsr, not all games support it, however I use something called lossless scaling off of steam and it has an fsr option

I always have a rule to never drop texture quality or anti aliasing if i can help it, i always tweak other things because texture clarity is the most important to me

I'd have to buy a new card to get DLSS though. Then again, I don't have to bother turning RTX off since the card doesn't support it to begin with.

@DanielOfRussia

Жыл бұрын

You don't have to buy nothing to turn FSR on. So that's a bonus.

@Hietakissa

Жыл бұрын

well RTX is off by default anyway, so you wouldn't have to bother anyway

@leonro

Жыл бұрын

@@DanielOfRussia also you can easily "hack" fsr into dlss games by replacing files

I like a good undervault with turning the odd setting down like shadows from ultra, keeps the pc running nice and quiet while not losing any frames from stock and saves 50w in game

Shadows are always the first graphics effect I turn off for performance. They only look good on the highest settings and most games have enough other lighting effects that you won't see the difference when you're invested in the gameplay. That being said, depth of field and bloom always get turned off by default. Most games way over use them and make it hard to see what you're doing while also impacting performance.

would love to see an updated overclocking video

Dude looks like an Irish MrBeast

@2022_temporary

Жыл бұрын

Why isn't no one talking about this ?!

This is all great advice but with some horrible misdirection. DLSS and FSR can be used on most if not all games/GPUs. Some have it natively, some you can mod it into (depending on the game engine). Also don’t change core and mem clock at the same time let alone that much. Start with core, increase 10-20 and run Kombustor until it crashes or shows artifacts, then increase mem clock by 10-20 until the same thing happens. THEN decrease by 10-20 respectively and you will have a very stable OC card.

Msi afterburner also has an OC scan that will OC in about 30m. It is decent. DLSS for sure, but game dependent because of ghosting problems or blurry foliage. Anti-aliesing is always on, so edges aren't rough or glimmers. Shadows and lighting for sure can go down to help the performance, though. My own little take.

Other tips for more preformance: Close background programs when gaming, monitor temperatures to make sure ur not throttling

@brianfox340

Жыл бұрын

Yes! This is the first place to look. Thermal throttling is real, and closing background apps is the easiest thing possible.

Thanks man really helped so much really appreciate it love Linus tack tips

This is a perfect kind of story from lmg small one minute videos

I recommend increasing by smaller increments when overclocking

Love this styler it’s sooo cool

Undervolting can also help

On Linux you can use FSR on *any* Steam game via Proto

Nice tips! I'll try overclocking my MX250 ultrabook and I'll enable DLSS too, might as well disable RTX!

@joelcoll4034

Жыл бұрын

🤣 My tip: try cloud gaming

@duck6966

Жыл бұрын

​@@joelcoll4034 give me a reason for cloud gaming, cost a pc by 1 years of subscrption

@nikoheino3927

Жыл бұрын

​@@duck6966where can i get a gaming pc for 150€?

@duck6966

Жыл бұрын

@@nikoheino3927 old ebay prebuilt then a gpu

@joelcoll4034

Жыл бұрын

@@duck6966 yeah but 1 he has an ultrabook, not desktop 2 that ebay pc wouldn't be as fast 3 you can get gamepass ultimate for way less than 150€ / year

I love the part where he showed and fsr

For the GPU overclock: the core clock is usually pretty much maxed Out from Stock. The memory clock not so much. Most gpus i overclocked we're running perfectly fine with +700 to +1000 MHz on the memory. Also, I wouldn't recommend overclocking the newer gpus, because they are running close to max performance and drain a huge amount of power and therefore create lots of heat. I am personally running my 1080ti at 75% power and paired with lower voltages through curve editor and a memory oc of +800mhz, i only lose 5% performance while never drawing more then 200 watt (before, it drew about 250w)

I want to add checking temps BEFORE trying most other things. It's easy to do, and thermal throttling of performance is real.

Going down one shadow level is usually what I do, in cyberpunk I just lowered the cloud/fog setting

What about RGB?

@2022_temporary

Жыл бұрын

Oh man, legend !

Things that effect lighting like ambient occlusion and Shadow settings eat the most fps when dealing with low to mid cards. But yes, MSI Afterburner is a must.

About fsr. Doesn't matter the gpu brand, only if it's supported

Also fsr can be used on any gpu

"It might make your game look potato, but at least the game Playdough." I fail to see the improvement.

@DenseMelon

Жыл бұрын

lol

You can use fsr on any gpu

and although rare some games that are cpu intensive ex. Star citizen get better performance when general graphics settings are set to very high/high because the higher settings will begin to offload more onto the gpu rather than keep it all on the cpu.

Decrease Shadows/Light, Ambient Occlusion, TAA and other extras and it should be fine. Textures doesnt do much, so keep em high 🔥

This is super helpful

Bro thx that was more helpful than every 15+ min video 😅

You can enable frame generation with lossless scalling and have stable 60 fps (you need to have stable 30 to do so)

fsr is really noticable with vega 8, because you're already at a low res

FSR also works on old Nvidia GPUs, that's amazing

RTX + DLSS = Life could be dream

On some games, shadows are drawn inefficiently and reducing shadow quality gives a considerable FPS boost without a noticeable visual difference. Unfortunately on other games, low-quality shadows are jaggy and horrible and/or don't help performance at all, so... it's really a case by case thing.

Tip: Dlss and fsr actually increases input lag and latency, but if you're getting low fps then you can turn it on if you want to. Hope this tip helped!

why would you recommend to lower textures? textures don’t affect FPS, only uses up VRAM, so unless you are VRAM capped, it does absolutely nothing

I love how relatable this guy is boosting fps from unplayable rate to a playable rate instead of others that start with an extremely good fps to an ungodly amount of fps

Does Msi afterburner work on dell?

Could you guys do a video like this for old cards or even cheap cards for us gamers that just have no budget???? Edit, I just got my hands on a Radeon HD 7570 1gb ddr5 card for my pc for something better than the built in graphics and I also have a Radeon HD 7770 in my other more powerfully pc which has done good for me but I know there r ways to make them run just a little better. I'm broke, like a lot of people r nowadays and just want to at least get a possible helper for those fps hopes!

@iwonttellmynametoamachine5422

Жыл бұрын

Tip #1: Concentrate on one PC

@berenjena69

Жыл бұрын

windows 7. thanks me later

@iwonttellmynametoamachine5422

Жыл бұрын

@@berenjena69 No security updates for years... Thank you for the many viruses? You should never have Windows 7 on a PC that is connected to the internet

@madlad_don2387

Жыл бұрын

@@iwonttellmynametoamachine5422 I already know that, was just asking if there is possibly other things that can be done for specifically older systems

@madlad_don2387

Жыл бұрын

@@berenjena69 Windows 7 is great and would help in some cases but for what I'm asking about its not gonna be what will fix or at least help an older system, my question is specifically about helping older graphics card get better performance in general.

I overclocked my _XFX Merc Black rx6750xt_ to 2823mhz on core, 2312mhz + fast timings on vRAM, a small 1152mV undervolt and +4% on Power Limit (from 230 to 240w tdp). The temps are good as before but without the tweaks i had stock rtx3070 scores on benchmarks and 2080ti level of performance in 1440p@144hz gaming, now i have overclocked 3070 results in benchmarks and 3070ti performance in games 😎 I am already using s.a.m. since June2022 when i dropped this GPU on my r7-5800x build 🥰 Edit: frs2 on Cyberpunk looks better than native and i play at 115+avg fps (without RT) everything on max 👌

Actual tech tips on Linus Tech Tips. Mind blown

All 3 together have now got me from 700 fps average to 1100 fps average Edit: i know i dont need the fps increase but i like seeing 4 digits on my fps. Also i dont know how i have that much fps bc i have a Radeon RX 5600 XT and that is old.

Make sure you get the official msi afterburner though. There's a lot of mining viruses and stuff bundled out there.

If I had DLSS to turn on, or RTX to turn it off, I wouldn't need extra fps would I?

Kenny u know Houdini died taking punches to the stomach. Glad u have gear on

forgot the part about stopping msi afterburner from starting with windows while tuning the overclock

What about resizable bar?

"Three ways most gamers already know about to boost FPS"

And turn on 4G decoding in bios, that helped me a lot

Regarding overclocking though? Some parts are built to be overclocked while others aren't so might wanna do some homework before just deciding to do it. Plus do remember overclocking does put more strain on the part so beware it'll possibly reduce it's lifespan.

Do you have tips for fps drops?

Remember for AMD you must make sure FSR is on in adrenaline and the resolution is set lower then ur native in both adrenaline and in game

and dont forget the most important one: clean your fricking computer insides!

@SemsEssence

Жыл бұрын

Yeah did that recently to my cpu cooler helped atleast with the noise lvl

I want a video like this for amd vega and intel uhd

What an ending 👏

You forgot to mention downloading more RAM 😂 And the rhyme at the end was perfect 👌

If you’re on windows there’s the prefer maximum performance power setting and I think a similar setting in nvidias settings idk if it does anything but mine as well

Thanks!

You forgot one little itty bitty thing thats important dlss only works for 20 and 30 as well as 40 series video cards

On Windows 11, disable Fullscreen optimizations by default in Windows settings under system > display > graphics.

I use DLSS plus supersampling in some games, to get sharpness back to the image. And helps lower the AA tax (I’m looking at you, the last two Tomb Raider games)

Why does nobody mention turning off motion blur tho?

Thought they would mention cooling.

U forgot to mention dlss is only for the Rtx lineup

RSR also, but that is kind of lowering settings (resolution).

Yeah, overclocking the GPU may also lead to graphics glitches in games without crashing in benchmarks, so look out for that too. I got sick of it, so I stopped overclocking.

How to turn on dlss if it isnt a game setting

My pro tip: keep your shadow settings one step below the highest setting, this can sometimes give you a massive fps boost.

@epmcgee

Жыл бұрын

Depends on the game tbh.

i have lot better results by undervolt my strix3080OC. 1920MHz ALL the time... +more stable clock and frames +less power consumption >no run into power limit +max 74° in a NZXT 510 Flow >no run into temp limit +longer lifetime for GPU maybe linus should make a video about it!?

@Yeahimagamer

Жыл бұрын

A bot stole your comment btw

@The_Pink_HUNTer

Жыл бұрын

@@Yeahimagamer what? For what reason?

@The_Pink_HUNTer

Жыл бұрын

@@Yeahimagamer ah i got it... damn internet is getting daily more stupid...

The rhyme at the end tho🤣

wow who would've thought

FSR works just fine on older Nvidia cards that don't support DLSS

Textures just effects the vram

for OCing: - max out the Power/Temp Slider - start at +140 on the Core (raise in 20mhz increments until it crashes, then finetune) - start at +1200 on the Memory (raise in 100mhz increments until it crashes, then finetune). (numbers apply to everything NVIDIA thats relatively current gen). For starting numbers feel free to do some google search. However: Keep in mind that Memory OC doesn't bring as much improvement as Core OC, and sometimes a too agressive Mem OC can hurt your Core OC (which should be prioritized). The 10mhz increments given in the video are BS, as for the Memory you'll be sitting for YEARS until you hit max. Make sure to test your OC. If it can do a 3D Mark Run and a 3D Mark Stability Test it's usually fine for 98% of the cases

@sh4rpys

Жыл бұрын

That heavily depends on the GPU. My card crashes at +110 MHz on the core

@maxzett

Жыл бұрын

@@sh4rpys as i said. but what kinda card do you have that cant do +110? :O

@sh4rpys

Жыл бұрын

​@@maxzett Well it is a factory OC card. If we go from the stock boost clock to mine it would be +255 MHz. With +1500 on the memory

@maxzett

Жыл бұрын

@@sh4rpys understandable but still weird. I've usually also always had factory OCed cards and they still OCed pretty good. Manifacturers rarely push it anywhere near limits

@sh4rpys

Жыл бұрын

@@maxzett Yeah. It thought it was pretty weird too. But I couldn't make past 3D mark with +110. Maybe with a different BIOS I could clock it higher. But haven't really looked into that

Note from Linus: IS NOT AI, IS MACHINE LEARNING!

@joelcoll4034

Жыл бұрын

I still don't get why he says that

@uziboozy4540

Жыл бұрын

@@joelcoll4034 because there's a big difference

@uziboozy4540

Жыл бұрын

@@joelcoll4034 "AI" is a pure marketing buzzword at this point

@nextProgram

Жыл бұрын

You people don’t know what you’re talking about. Machine learning is a subset of artificial intelligence. All machine learning is AI

@joelcoll4034

Жыл бұрын

@@uziboozy4540 machine learning is artificial, is it not inteligent then?

I don’t play for performance, I play for experience. Aka, all graphics settings up and turning less important ones down if I have an unstable framerate

AMD FSR does not use machine learning.

FSR works on any GPU (that isn't older than a 10 series) and DLSS requires an RTX GPU so you'd have to spend money to buy an RTX card

ty

Why do I feel like I've seen Adam before? Was he on the "Good Mythical Show"?

Tip number one and it's already wrong, FSR works on both AMD and Nvidia, which is good as my 1080 Ti doesn't support DLSS.

Armory crate works as an over clocker, right?

@matthewnour97

Жыл бұрын

Apparently armory create sucks to have installed. I'm still new, but I had to spend some time uninstalling it and removing its hidden files