Thanks!

@adubbproductions

7 ай бұрын

My pleasure. I appreciate the donation. 🙏🏾 Thank you.

OMG #3 is fire too!

THANK YOU, thank you, you have made my life so much better with this information. I wish someone had shared that with me when I first did a cap in class. You have given me hope because I had lost it. Thank you so You have given me hope because I had lost it. Thank you so much.very much.

@adubbproductions

8 ай бұрын

My pleasure. Thank you for watching.

Been embordering for over 20 plus years and working on designs or names (around a 1000pc a year) You have to train your self to do work upside down or inverted. Sometimes its the only way. A lot of my transfer designs I do/did inverted. Just seems to be easier alignment and centering. Once you do it a few hundred times you get comfortable.

THANKS as always for sharing your knowledge with us

Thank you for teaching me something new. I appreciate you.

Thank you for sharing your experience and insight.

Fantastic video, thanks for the tips!

😮 Bro, this is why I rewatch you. The last time I watched it did not notice about the placement Tool that goes back to where you first started having issues.

Great video Allan! Thanks a million!!!

Great tips. Thank you for sharing your experience and insights!!🎉

Such great Information . Thank you

I want to thank you for all the knowledge you are putting out there for everyone. Your videos are always so clear and helpful. I am just getting into embroidering and your videos are invaluable with how and why you do the things you do. So I would like to thank you from those that are like me and just getting going and searching for tips on how to make things better. Watching your brand grow really is a joy and inspiration to watch. I hope you continue to shoot for the stars.

Thank you for those tips!

Awesome job! Thank you!

Thank you for making this video, you helped me and I appreciate that.

these were super helpful, glad I used your link when I got my MT-1501

Thank you so much for the tips by far this will help

Number two tip is one i for sure didnt know thanks. We all are always learning keep it up and feel better.

This was really helpful!! Definitely using these tips.

Thank you, thank you, thank you for this wonderful video. My trainer didn't even know what that button was for. I so needed to know this about the needle relocation and then the hat issue. Wow! you have helped me so much! Please keep the videos coming. Have a Blessed journey!

Thank you! You are Amazing! You have so much knowledge! Again Thank You!

Tip number 2 is a total life saver! Thanks so much for teaching me. Great video as always.

Very very helpful information. Thanks.

I can't wait to watch more of your videos. First video and you have already answered 2 of my issues that I can't even get our service men to bring up. Legend. Love the needle timing. Never knew

Thank you for the tips -- they were helpful. Please continue sharing these tips with us.

@adubbproductions

Жыл бұрын

Will do.

Bruh, these tips are 🔥🔥🔥🔥🔥. We appreciate you.

@adubbproductions

Жыл бұрын

No problem Marlon. I just wanna see everyone making that money.

Thank you so much! Thats soo cool the last tipp! Wow!

Hey Allan, thank you so much for the awesome tips!! You’re awesome ❤

@adubbproductions

Жыл бұрын

Glad you appreciate them Isa. Thanks for watching.

Bro your videos are really helpful, thank you!!!!

@adubbproductions

Жыл бұрын

No problem. Thanks so much for watching.

Thank you very much for that info

Thank you for the 3 tips number 2 was the most meaningful

@adubbproductions

Жыл бұрын

No problem. Thanks for watching .

Cap tip thank thank you!

Thank you so much! All this info is GREAT! But the ‘needle’ info, for me, was spot on. Again, thanks!

@adubbproductions

Жыл бұрын

No problem. Thank you for watching. I really appreciate it.

Great tips! Thank you.

@adubbproductions

Жыл бұрын

No problem. You’re welcome.

Thanks for the demonstration

@adubbproductions

Жыл бұрын

No problem. Thanks Deborah.

great information thank you i appreciate the tips n tricks

Subscribed thank you for this info. I’m looking to purchase a new embroidery machine and this helps a lot

2nd tip was amazing thank you!

@adubbproductions

6 ай бұрын

You’re welcome. My pleasure.

Awesome information, thanks!

@adubbproductions

Жыл бұрын

No problem.

Great tips!! Thank you so much! I am fairly new to Ricoma and these tips are very helpful. I wish I would have discovered you before I purchased my machine and went through your link for purchase. I have learned so much from you. Thank you!!

@adubbproductions

Жыл бұрын

No problem. I appreciate that. Thanks so much. Hope I can continue to help in your journey.

Thank you - I've had issues with caps and I'm hoping this helps 🙂

Thank you, thank you, thank you for your videos! Never knew about the button for going back to the spot where embroidery ended. I have accidentally hit the moving buttons. Can't wait to try it! love your honest videos!

@adubbproductions

Жыл бұрын

🙌🏾😃. My pleasure Michele. Love when someone gets some good useful information out of the video. Going live today adjusting tension on my machine showing how I get my machine to run so good. Stay tuned.

Thanks for the content 💗

@adubbproductions

Жыл бұрын

You’re welcome.

Thank you for the information 😊

@adubbproductions

10 ай бұрын

You are welcome.

Bro crazy amazing PS using that I test Currently to tune up my EM1010 embroidery machine. Keep pushing those tips and tricks

Very helpful!

@adubbproductions

Жыл бұрын

Thank you.

Great tips, my favorite was #3 I've been having a lot of issues on hats and I'm excited to make this change to my machine.

@adubbproductions

Жыл бұрын

My hats don’t flap anymore at all and registration will be 99% better after you make the adjustment. Idk why they don’t just come like this.

Thanks!

I have yet to do large hoodies and that's a great tip about the small neck holes. Great advice!

@adubbproductions

Жыл бұрын

Thank Kayla. I ruined a few hoodies and made a few designs smaller till I figured it out.

Good Tips! Much thanks....

@adubbproductions

Жыл бұрын

Glad to help.

WOW thanks for the tips

@adubbproductions

Жыл бұрын

No problem.

Thanks for all of the great information you provide. Once I get out of this apartment, I'll make a move on purchasing one of these machines.

@adubbproductions

Жыл бұрын

In due time. 💪🏾💪🏾💪🏾💪🏾

Thank you sooooo much this is a game changer Thank you for sharing

@adubbproductions

Жыл бұрын

No problem Lucy. Always glad to help.

Thank you

Thank you for your help. Looks like your machine inventory has increased!

Great tips ! Thanks

@adubbproductions

Жыл бұрын

Thank you.

Thanks for the tips! I am new and trying to master my Ricoma

@adubbproductions

Жыл бұрын

Hang in there when you get it down it’s a money printer.

Hey Allan, good to see you back at it!

@adubbproductions

Жыл бұрын

Thank you.

Thank you haven’t checked the machine out yet but this was vary helpful👍🏾

@adubbproductions

11 ай бұрын

My pleasure.

I’m not at that level yet but these were excellent tips. Keep them coming, I appreciate you. Thanks!

@adubbproductions

Жыл бұрын

No problem. Thanks for watching.

Thanks for the valuable tips. I have am EM1010 and now a CHT2 1504 and would love some tips on my 4 head especially with the large sash hoop.

This was dope thanks for the jewels these tips helped alot.

@adubbproductions

Жыл бұрын

Thank you.

Much appreciated. My team Just purchased the MT1501 and we about to make a lot of noise in Baltimore! “Major “ remember the name!!

Thank you for the information. My machine is on the way and this was very informative as hats, and hoodies are going to be what I will mainly be doing.

@Roketshipman

29 күн бұрын

Any updates sir?

One of you better videos!!! Thx

@adubbproductions

Жыл бұрын

No problem. Thanks for watching.

Whew just saved a sweatshirt…great tips

@adubbproductions

Жыл бұрын

Thank you. 🙏🏾

Very interesting

@adubbproductions

8 ай бұрын

Indeed. 🙏🏾

I came across your videos by mistake I never ever thought about embroidering or own a machine I've been watching all your videos and I bought one today the 1501

@adubbproductions

Жыл бұрын

Wow. Congratulations on you machine. That’s insane. I hope you used my link. Lol

You came a long way! I want to start my soon. Get my 1st ricoma and get a heat press and printer for transferring images on t shirts and hoodies. What printer and heat press do I need?

hello allan--love your videos! question for you: once you lower your needles for hats specifically, do you have to raise them again to do flats? same question with lowering the cap driver. thank you so much! blessings to you!

Helpful video. Do you mind doing an actual video on tip #3 using a cap. I am a visual learner. Thank you in advance. Thank you for your knowledge. All tips were helpful.

@adubbproductions

Жыл бұрын

Yup will do.

@bridgetgainous5487

Жыл бұрын

@@adubbproductions Fantastic!

Boss Info!

@adubbproductions

Жыл бұрын

Thanks bro.

awesome video thank you. Couple questions for you, what is the bobbin tension your have on your MT-1502 and do you run your pressure foot that low on a Richardson 112 hat?

Along with the pressure foot you also have to lower the cap driver.

@adubbproductions

Жыл бұрын

Yes. They can try that as well. I’ve heard of the lowering the cap driver but have yet to adjusted mine, still embroidering like a champ.

Thanks. I guarantee the shirt thing would have tripped me up.

Thank you. This was good knowledge......I am about to buy the MT-1501....other videos say to go ahead and buy the 1502 so you can grow into it. What is your opinion?

thanks for the tips!! do you have any videos on how to use purchased fonts with the ricoma em1010?

Appreciate the game. With the hats, will that tip work on the EM-1010 knowing I would have to take the front face off? I know the EM-1010 is not the best when it comes to hats.but I have to make due with what I have. Thanks again.

That is very helpful something I learned I do have one question I have a problem with one needle not stitching at all I have rebooted it I have reset it I have diarrassing anything I can but this needle will not stitch any suggestions

@adubbproductions

11 ай бұрын

If it’s not embroidering at all the needle is in backwards.

Hey Allan, can you recommend an embroidery machine just for logo and name (5x7in size) on left chest? We are going to open our uniform buss soon. Thank you!

Thanks for the tips. I guess my issues was added to your content. Just wish I would have known to flip my hoodies before I ruined a few of them.

@adubbproductions

Жыл бұрын

Yea it did. Sorry. I got a bunch of these little tip videos I need to make. Just gotta title them right so people can find them and they won’t ruin my analytics. You’ll get it. I know you will. It’s still frustrating to me at times but i always figure it out.

@queenniyahbingai9347

Жыл бұрын

Hi Katrina on ADubbs video. I appreciate you as well.

@katrinasgracefulcreations3711

Жыл бұрын

@@queenniyahbingai9347 Thank you so much

@katrinasgracefulcreations3711

Жыл бұрын

@@adubbproductions I came back to this video to help lower my presser foot. thanks for the tip!

@adubbproductions

10 ай бұрын

No problem love.

Thank you for this video. Question about lowering the foot... My machine doesn't show 180 degrees it says 172... and does lowering it for caps affect other garments? I'm assuming the only time you would want more clearance is for puff? which I don't care to get into?

Holy shit I am in my second year with a mt 2008 and just learn the last tip I been doing cap at 400 stich per min😅

I have a ricoma 1502 and are having problems embroidering flat bill hats. The hat bills hits the bottom plate and I get needle breaks.

Hello Allan thank you for the videos! I purchased an MT 2001 8S and I've never used a commercial machine before. Wanted to know if you did consulting? If so I would be interested in getting you to help me get started and acclimated with my machine. I always used a 10 needle baby lock for the last 7 years wanted to step my opportunities up a bit and prepare for expansion. So I hope to hear from you Thanks for your time and all of the resources you help with. Don.

Thank you for the tips. Got question for you I hoped you don' t mind. How you get your small spool to go all the way down on thread spool.

@adubbproductions

Жыл бұрын

Take the plastic piece off and it will sit flat on the machine

Hi Alan, another great video. I am having a little trouble and I am waiting for a response from Ricoma. I just thought that you might have the answer. I embroidered some left panel caps (Richardsons 112). Now I am trying to embroider full panel design on caps and my cap driver keeps going to the left. I can not have it centered on my cap. Any idea what may be causing this?

Thank you, I never knew those things. Very helpful! (I knew there was a way to lower the presser foot, but I didn’t know how to do it).

Do you or have you ever used the sash table for the 1501 TC- I can not get my hoops to center back up

Hello, love the tps. I saw that someone else asked if you can leave the foot lowered when you are doing flats but I didn't see a reply. Maybe I missed it but could you please answer that question for me.

@adubbproductions

9 ай бұрын

Yes. I adjusted the foot and leave it that way for everything.

Seeing if I can use your link or give credit for the machine I purchased waiting on delivery.

@adubbproductions

Жыл бұрын

You have to use my link and put in an inquiry. It might not be to late. I’m not sure. Or just call your sales rep and let them know.

will this work on the EM 1010 also

whats the difference between the tc-1501 & MT-1501?

I called them today to apply for business financing. I pray all goes well. I want the MT-2002-8S

@adubbproductions

Жыл бұрын

I hope you mentioned my name Tajuana. As much as I be beggin y’all in every video to use my link. 😳

@adubbproductions

Жыл бұрын

😳

@robertscott3866

Жыл бұрын

If I got financing you should my score is way low

@tajuanahuston2225

Жыл бұрын

@@adubbproductions I just sent Gabe an email 🙏

@adubbproductions

Жыл бұрын

Awesome. Thanks for trying.

Hey Allen. You stated in one of your videos regarding how to back up stitches but I can’t find it. If your thread breaks, and you want to reverse your position of when it stops stitching. (I hope that makes sense) SWD. THANKS IN ADVANCE

@adubbproductions

Жыл бұрын

Yes. Hit the bottom on the screen next to the Lock icon. Put it on F.L float low. Or F.H float high. When it’s in either mode you can rewind using the stop button or fast forward using the start button. You can see on the screen where you are in the design. Once you corrected what was wrong or went back to the point you want flick the toggle switch on the head ( that tells it to start right away.) then hit that button next to the lock a few more times so it goes back into embroidery mode (it will probably say waiting or something like that. ) then press start again. I’ll make a video on that this weekend.

New to embroidery with my first Ricoma RCM-1501TC-7S. I am struggling with cap embroidery. Constant thread breaks. Hoping you can possibly give some assistance.

@adubbproductions

5 ай бұрын

Sure. You can schedule a consultation at Adubbproductions.com I’ll help you set everything up and get it running smooth.

Do you have a video on a ‘no needle’ error? If not can you post one?

@adubbproductions

4 ай бұрын

Yes. I’ll make it tomorrow. Pretty much all you have to do is turn the red dial on the side till a needle is appears on the screen where it says 0.

Allen, The last tip about adjusting the foot, do you know if that is possible to do on the EM-1010?

@adubbproductions

Жыл бұрын

Yes but you would have to take off the entire face plate. A lot more of a pain in the butt cause all the threads come out etc.

👍