pretty sure the shifter debounce, like all other debounces in electronics, doesn't add a delay...it prevents the second shift for 80ms. I can't imagine anyone needing to shift a second time within 80ms :D

@TeroD333

16 күн бұрын

Exactly this

@JCRacing57

16 күн бұрын

in the text info next to the value it says "Add delay in Milliseconds to sequential shifter to reduce double shifts". So taking that at its word, it is a delay, but yes calling it a Debounce defenitally adds some confusion, either way it doesnt hurt to make it 0!

@TeroD333

16 күн бұрын

@@JCRacing57 Wording is a bit misleading, I'd agree there, but it's probably chosen so to be understood by as many people as possible. If you think how a debounce works then you know it won't add a delay but instead doesn't allow another shift within the set timeframe.

@Kevin.Savoie

9 күн бұрын

The 1st click is instant. After this, it wont register another click for the value in that line. This is in case your paddles or buttons don't accidently trigger to quickly and cause a double shift. With most racecars now having a safety built in to not over rev into the electronics, this is moot... but if your buttons have bad contacts in say the V8 Supercars that don't have that, you could downshift from 6th to 1st in a ms if the button registers multiple button presses for no reason.

The laser scan settings is only relevant if you run the New Jersey tech track. It means nothing anywhere else. It’s just a visual thing for the trackside art that wasn’t rendered.

Hi there! FYI: Laser Scan settings: - PointSizeMM - PointSizeMin - PointSizeMax - MaxLaserScanVidMem Do not have anything to do with FFB: "These have to do with the pre-release tracks we have pushed out from time to time. These are tracks with just the racing surface completed. The rest of the world is represented as a point cloud of dots from the raw laser scan data (this is a distilled down set of dots, the raw data is many hundreds of gigabytes). You can tweak these values to make the dots more or less visible." Best, Miguel

Cheers mate great video. Had no idea on single screen curve setting.

@JCRacing57

16 күн бұрын

Yeah it’s kinda tucked away, I didn’t know until I looked!

Love this, thanks.

@JCRacing57

16 күн бұрын

Of course! 😊

Also, if u hit ctrl + f12 on the sim it will pop up the camera settings, allowing for further tunning of the sitting position and saving these settings per car

@JCRacing57

16 күн бұрын

i know, but thats not really a secret is it ;)

@marijn17s

16 күн бұрын

@@JCRacing57i can assure you 80% of iRacers don’t know this

@Remko_Simracing

16 күн бұрын

@@ConradoMazaro Yeah calculate the FOV and use the camera tool to set your seating position. For example if you think your FOV it way to close to the steering wheel, set your seat backwards rather than setting FOV higher.. Like Marijn says, not many know about it or think the camera tool is only for replay stuff..

@theloneracer1935

16 күн бұрын

Lol it took me years to figure out I could use it to adjust my seating position instead of just cool angles for replays. Was an absolute game changer

@BeanDip96_

12 күн бұрын

Yes! I use this all the time to adjust driving position ✌️

Just a note on the triples setting for curved, if you have triples, even if they are curved, you should leave the settings at 3 flat, iracing cant figure out triple curved.

@Zee20Ate

3 күн бұрын

Either way is the same. Using the curved option your curvature is essentially the side monitor angle. Most people using curved option make the mistake of setting that to the curve of a single monitor, rather than correctly setting it to the curve of 3 monitors combined.

Always a good idea to make a backup first, if you are messing with config any config files.

@JCRacing57

16 күн бұрын

Yes definitely something to mention!

Thank you

@JCRacing57

16 күн бұрын

@@kptv75 of course!

Thanks!!!

@JCRacing57

16 күн бұрын

Of course!

Great vid

@JCRacing57

16 күн бұрын

thanks :D

Wouldn’t mind some VR tweaks in the INI

@JCRacing57

16 күн бұрын

i dont use VR so i dont have any sadly 😅

Do these settings matter if you have a mid tier or low tier gpu??

@JCRacing57

17 күн бұрын

the laser scan points may have a slight impact on your FPS, i personally lost around 5ish depending on the track. It shouldnt make a huge diffrence, but if it does feel free to revert it, the rest shouldnt!

@DirkFedermann

16 күн бұрын

@@JCRacing57 That is BS. Laser scan points are only relevant on the Tech Tracks and describe the size and the number of dots VISUALLY. And there is currently only one Tech Track available (New Jersey Motorsports Park) it does not affect other tracks - especially not driving/physics related.

@louiienation8497

15 күн бұрын

@@JCRacing57I updated all the files for iRacing and I feel no difference nor see any difference. Thanks for the video tho.

Great video learned something new

@JCRacing57

17 күн бұрын

that was the goal! :P

If you choose 3 projections for single/curved monitor, you can notice projection edges between them - vertical lines where they are not 100% aligned. Its not very noticeable, but difficult to unsee. :)

@JCRacing57

16 күн бұрын

Really? I’m going to really have to pixel peep and see on mine, never noticed anything out of the ordinary myself

@here2race

16 күн бұрын

@JCRacing57 I've seen it quite a while ago and never used 3 projections since then. So I checked again - they somehow blurred it. It is barely noticeable now, only if you know where to look. I can still find it, but it's definitely false alarm here, sorry. :)

@kellygreenhoe3954

12 күн бұрын

This!!!! It's why I went back to unchecking the box, I could not stand that tiny little un-natural line where the tops of walls and things seem to come to an upward point where they meet, very annoying once you notice it and cannot unsee it like you said.

@here2race

12 күн бұрын

​@@kellygreenhoe3954it seems to be better now if I checked correctly :)

Why are you yelling

@JCRacing57

16 күн бұрын

im not, gain might have peaked a couple times on accident though😅

@Dizturb86

16 күн бұрын

Lol I think they mean that you sound very "energetic" haha

@redcobra1246

16 күн бұрын

IM NOT YELLING

@RichAbe23

13 күн бұрын

😂

@freekoupons9531

12 күн бұрын

He's just excited 😂

I think the laser settings are placebo, personally. 🤷‍♂️

@JCRacing57

16 күн бұрын

its definitely not on every track, and you probably need a DD wheel if you dont have one, but for me, on bumpier tracks like Sebring and Nords, i could feel an ever so slight diffrance, nothing major, but the extra data doesnt hurt!

@TeroD333

16 күн бұрын

@@JCRacing57 It's a setting that only affects the visuals of so called Tech Tracks on iRacing. Long Beach was one for several years until they finished it.

Wow. So wrong on the first two settings. Complete lack of understanding of denounce.

1. Uninstall the game. 2. Refund. 3. Play other sim and have fun :)

@Remko_Simracing

17 күн бұрын

Or just get good at it and not cry because you are not so good at the sim in some random comment section. :)

@Nuxzy_

17 күн бұрын

iracing shits on them all

@BiIboSwaggins

17 күн бұрын

1. Realise that every other sim is basically crap 2. regret refunding 3. re-install iRacing. 4. accept that iRacing has the market cornered for a good reason, it's simply the best.

@tome1903

17 күн бұрын

Find me another dirt track Sim and sure

@JCRacing57

16 күн бұрын

if you dont like iRacing thats totally fine, but i question if that is the case, why your watching a video about iRacing settings 😅😂

RaceRoom gots better FFB