3 Mill Upgrades (A Side Project Extravaganza) || INHERITANCE MACHINING
Ғылым және технология
Welcome back to the machine shop! This video I’m installing 3 mill upgrades on my bridgeport style vertical milling machine. A pneumatic drawbar impact wrench for rapid changing of end mills and other tooling. A digital scale / micrometer with a digital readout on the mill’s quill for accurate depth tracking. And a powerfeed unit for the z axis to more quickly change the knee location without breaking a sweat. Along the way I get pulled into many other side projects including (but not limited to) machine leveling, lubrication system repairs, hose and cable management, and even some shop organization.
#inheritancemachining #machineshop #hobbymachininst
Patreon (Early Access + Ad Free + Drawings) - / inheritancemachining
Drawings Store - inheritancemachining.com/?pro...
Instagram - / inheritancemachining
Website - inheritancemachining.com/
Amazon Storefront (affiliate links): www.amazon.com/shop/inheritan...
And a special thanks to my "Micrometer" level patrons!
Ralph M., Brenton, Ethan B., Chris W., Matthew K., Terence K., Charles P., Michael T., Daniel T., Jacob S., Ben M., Jim H.
TIMESTAMPS
0:00 Intro
1:16 The Upgrades
2:07 Lube System Repair
4:17 Storage Upgrades
7:43 Mill Leveling
8:39 Drawbar Impact
10:04 Quill Micrometer
13:07 Z Axis Powerfeed
15:00 Powerfeed Modifications
16:53 Troubleshooting
18:00 Limit Switch Mounting
FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
www.epidemicsound.com/track/S...\
• 3 Mill Upgrades (A Sid...
© 2022 Inheritance Machining, LLC. All Rights Reserved.
Пікірлер: 797
Thanks for watching everyone! If you liked this type of side project content or have a more clever name for the series let me know! Tune in again Friday July 22nd at 10am EST for more machine shop shenanigans
@alp763
Жыл бұрын
I don't think many of us are specifically interested in "main" projects VS "side" projects. It's not like everyone are here to replicate the sine plate 😁 I actually enjoyed this "side" video a lot. I would love to see more of this and with longer videos (even if you keep some extra minutes of what you are doing with only musicu behind it - it will already be great and should not harm). 20 minutes is a bit short for me. With such calm and meditative narration it would make sense to make videos much longer. Please consider this. Also, me personally would be interested if you make some side-side videos, like detailed how-tos on different tools and how to use them. I bet there is something rare and interesting on those shelves.
@InheritanceMachining
Жыл бұрын
@@alp763 Noted! I'm bound to experiment with different things over time. Thanks for the feedback!
@williambnell
Жыл бұрын
I like the name "side projects" it's unique to this great guy named Brandon from Inheritance Machining.
@eatenkate
Жыл бұрын
Side projects is what they are, any other name would just be a needless complication. I like side projects, I like main projects, I wouldn't care if you took up knitting or basket weaving or hula hooping because i believe you'd still make interesting side-project filled videos about it.
@InheritanceMachining
Жыл бұрын
@@williambnell Daww shucks...
The power knee was the FIRST mod I did to my Bridgeport. After being a machinist for a decade for other people I swore I would never crank that thing again. I also tossed the crank handle in favor of a permanently mounted 8” diameter hand wheel. It’s large enough to make fine adjustments, without the risk of hitting you in the nuts.
@KnowledgePerformance7
Жыл бұрын
First day of shop class in college I watched two people smack themselves with a knee handle, seems a wheel makes a lot of sense
@hydroy1
Жыл бұрын
True but over time you will switch out the cheap made in China Enco power feed unit out with a Servo or Bridgeport brand as the Enco will always be a smoke show under hard use in a very short time.
Your grandfather had everything! He even left you some side projects to complete. How generous.
@InheritanceMachining
Жыл бұрын
so many side projects 😂
@creativecraving
Жыл бұрын
I now understand why your grandfather never installed the motorized z-axis himself: he must've reached his side-project limit when he found out it only went in one direction. 😊
If everyone's days were this productive I'd be watching this from the moon. Great work!
@InheritanceMachining
Жыл бұрын
Thanks! But to be fair this was spread out in little chunks over a week
@Likeaudio
Жыл бұрын
That comment is astounding. And so true
@jacob_90s
Жыл бұрын
Lunar Inheritance Machining
@thinking-monkey
5 ай бұрын
I know right? Watching this makes me feel like a lazy bum and I was pretty busy with projects today...or so i thought until i watched this episode lol
Time for another side projects, make metal blocks to replace the wood blocks on the mill
@gfishbait
Жыл бұрын
Cast iron, for stability
@THusbands
Жыл бұрын
Add a few weeks for surface grinding.
@theprojectproject01
Жыл бұрын
Which will, themselves, require side projects for fixturing properly
@rebmcr
Жыл бұрын
Replacement feet, why bother with interfacing to the existing feet when we're already committed to a side project, with tapped holes right there in the place we need them!
@MurcuryEntertainment
Жыл бұрын
Or new longer adjustment screws.
I discovered this channel a month ago and really appreciate your style. I am not a machinist and enjoy how you clearly explain everything where I am able to understand. The footage and narration is perfect. Change is inevitable but please keep making your videos the same as you are now as you are doing a great job.
@InheritanceMachining
Жыл бұрын
I appreciate the support and really like hearing that not only machinist can follow along. Trying my best to stay consistent!
@mgk1397
Жыл бұрын
@@InheritanceMachining I agree, I'm currently in a Technical highschool for machining and electronics engineering. I find your videos to be a perfect balance of pace, explanation, quality recording. Your explanations are well balanced between understandable to those who don't know, and not borig or overly simplified for those with experience.
@nigelnightmare4160
5 ай бұрын
@@InheritanceMachining I'm NOT a machinist,, more of a jack of all with an interest in how things work. Now 60yrs old and find it comforting that young people like yourself still have an interest in doing things by hand, even with the TD using a drawing board instead of CAD.
Your distractability is one of the many reasons we love your videos!
That floating handle only a few mm from the rotating Z drive looks spooky. Mind your forearm and wrist if you kick that handle forward accidentally with the z-axis motor engaged.
@rossilake3430
Жыл бұрын
Remove that Handle from the lower” Z” axis. You don’t need it now. Take that center screw out. If you ever need to hand crank her. Just put on and engage/crank and remove. Throw on a nail in the wall to the left. BOOM! Life is good.
@jaantobro5271
Жыл бұрын
Yeah i also tought of that. I would also ditch the handle.
@killemtoenjoythesilence
Жыл бұрын
I just commented the same thing before I saw yours. Yikes. I've actually seen that happen. It ended in a broken wrist.
@GeneralChangOfDanang
Жыл бұрын
The best thing to do is replace that handle with a round hand wheel after adding a power feed.
@AttilaAsztalos
Жыл бұрын
That handle scares the shit out of me - if it engages at fast travel, it looks like it will break the handle or whatever it slams into, whichever is weaker. Which bone tends to be.
Honoring your grandfather through the maintenance of the machines he left you is messing with my allergies and I got something in my eyes. I'm sure he'd be incredibly proud. You both have my respect .
@InheritanceMachining
Жыл бұрын
Thank you so much! 😁
@CGT80
10 ай бұрын
It is great to see him using his grandfather's tools. I have a number of tools from my grandfathers and love keeping their memory alive. My dad was going to toss a bench grinder that his dad had, but luckily I saved it from the curb. That grandfather passed before I was born, but he was a too land die maker for the aerospace industry near LA. The grinder was probably from the 30's and was a sun brand of packard motors, owned by general motors from what I recall. It is torn down so I can powder coat it and replace the bearings. It gets used to sharpen my tungstens for tig welding and has a wire wheel on the other side.
To be honest, I love the side projects. It satifies the perfectionist tendencies that plague me. Love the channel and all the content.
@InheritanceMachining
Жыл бұрын
haha thanks!
I really enjoy your channel. I'm placing your videos in the "competency porn" category. There is something immensely pleasurable watching a skilled person build, create, and otherwise be productive. Thanks for sharing.
@InheritanceMachining
Жыл бұрын
😂 I'll take it. But seriously, I really appreciate that!
@rebmcr
Жыл бұрын
@@InheritanceMachining I have no doubt your grandad would be proud seeing the care and attention you're giving to his things.
That's called owning a shop. People tell me, "You don't build much?", I build my shop, and mostly fix other people's f ups! Lol
@InheritanceMachining
Жыл бұрын
This is the way of a hobby machinist lol its like manicuring a zen garden
When I first found this channel (three or four videos ago) I kinda liked it. There is a fair amount of machining content on KZread and I didn't realise straight away what makes it unique. It's grown on me in that time and now I can genuinely say I love it!
@InheritanceMachining
Жыл бұрын
I really like hearing that! I know it's somewhat of a saturated "scene" but maybe my twist will resonate with different people. I appreciate the support!
Everything about this video was wonderful. Side projects are just as ripe for learning as main projects
@InheritanceMachining
Жыл бұрын
Absolutely agree. Thanks for watching!
Came for the machining stayed for the side projects 😁
@InheritanceMachining
Жыл бұрын
😁
My huge complaint is that this video wasn’t long enough!!! I could have watched these side projects for hours! Love it, thank you
Nice work as usual. I know nothing slows down productivity like trying to document your productivity, so thanks for taking all the extra time and effort to film your workshop shenanigans. You filming (PLUS narrating, editing, audio syncing, uploading........ And the whole raft of other things needed to create professional looking content) is very much appreciated.
@InheritanceMachining
Жыл бұрын
Thank you very much! You must have a background in production as well. There's so much more than meets the eye
@michaelrice500
Жыл бұрын
My sister edits/repairs videos for production. I had no idea how much work it was until she showed me a 15 second ad she worked on that took a team seven weeks to finish. If only she had a z-axis power feed!
@Reman1975
Жыл бұрын
@@InheritanceMachining Na, No significant history of videography here. I used to work as a mobile IT support guy for a large company, and unfortunately I was senior to most of the other technicians there, so when we got new contracts it was left to me to go in blind on the first weeks worth of their jobs and work out how to setup new kit, and solve various software or config problems. Then, while still onsite (In case I needed to double check info) I'd have to write up a process script for the other techs to follow. It might only have taken me 30 minutes to work out everything I needed to document, but actually writing it all up, adding photos/screen grabs, and testing the script for errors would take hours. So to produce a 10 page script to cover what ended up being a handful of 10 minute jobs might easily take 5 or 6 hours to complete. So THAT'S why I can extrapolate how capturing 20 minutes of video must take multiple days of messing about moving the camera, checking things are in frame, focused, and nicely lit, then yet more time editing all the footage together, before realising that one key shot's unusable, so sneakily spending an extra day filming yourself making a second copy of that part to splice in (And hoping no one notices anything that points out that it was filmed 4 days later than everything else. :D), adding the voice over, realising the run order of the footage isn't quite right, so re editing that, and then redoing the voice over, before finally deciding it's good enough to be uploaded. :D And for all your hard work and troubles, you'll probably still get a slue of people calling you a moron in the comments for not wearing a full suit of bomb disposal tech's body armour as safety equipment when using a hammer in the video. :D
@InheritanceMachining
Жыл бұрын
@@michaelrice500 😂
@InheritanceMachining
Жыл бұрын
@@Reman1975 oh yes... work instructions. the bane of my existence! You're not far off on the process though! But when I do have to remake something, I always make it part of the story haha and usually the opening and closing scenes arent shot until after I write the script. just because I dont know what I'm going to say until I hash it all out 😁 Yeah the sour commenters come with the territory. Especially being less experienced... but it's honestly not that terrible.
I am glad to know that what plagues much of my projects forward momentum (side-projects) affects others as well! haha
Only one other youtuber makes me this happy they posted, TOT
@InheritanceMachining
Жыл бұрын
😎
This man's side projects have side projects :)
Guy Debord would be proud of your dérive situationniste, your perpetual drift!
@InheritanceMachining
Жыл бұрын
it's an unstoppable force
@michaelrice500
Жыл бұрын
C'est bon !
I love how this video is "a dude messes around fixing random stuff in his shop" but the way you put it together makes it interesting.
@InheritanceMachining
Жыл бұрын
Much appreciated. Was a good chance to knock out a lot of stuff I wouldn't get to otherwise
Wow! In all these years of watching and following on YT, I have never been compelled to comment before. I am a late life diagnosed person with ADHD. I have gloriously discovered that my side projects have diminished significantly, or should I say, they don't interfere as bad as they did with my main project at hand.
@InheritanceMachining
Жыл бұрын
are you suggesting I have ADHD? 😂 Just kidding! For the most part these were all part of a plan to knock out as much side projects as efficiently as possible. In hopes they wont interfere with the main projects like you mention
@michaelrice500
Жыл бұрын
Hang in there, Ray; you got this!
@rayswicz5532
Жыл бұрын
Only.....that just looks so familiar!..... just recently, it was time to reorganize my tool box at work....but not before I repaired the oil leak in the pump on the lathe first....and then organize the Ridgid pipe threading machine....and the hydraulic hose crimper. When I had this late life diagnosis, I mentioned it at an extended family gathering and several close relatives all with advanced medical degrees of one kind or another, my sister included, responded like it was no surprise at all to them. I was the only one who didn't know my entire life LOL
Not sure if this channel is your first foray into video production and editing, but right out of the gate it is so polished and well done! I refurbished an old vise that belonged to my grandfather, and I have and use all of my dad's old carpentry tools. The relatability of your story to mine is crazy, and much appreciated. I have watched my way through everything you have posted (up to this video) in a few days. I am trying to pace myself because when I catch up I will be checking your feed obsessively for the next installment. Coincidentally, my career began on a drafting board, and I sold my table and drafting machine when I transitioned to CAD in '94. I still have all my old templates, lead-holders, compass, scales, mechanical pens (and pounce powder), dusting brush, tape dots, Leroy lettering set, erasing shield (and scum bag) and electric eraser. Your use of these old tools slammed me right back to the days of standing hunched over a drawing, and dreading the inevitable revision process and the holes I'd erase in the vellum sheets. Then there was the mylar and plastic lead (my least favorite) and erasing the matte off the mylar. I spent 10 years on a drafting board before I switched to CAD 100%.
yep....that's exactly how most of my projects go.
I love these side-project videos, more than I love just watching a good machining video.
I love the style of that pneumatic quill wrench
Your grandfather apparently loved gadgets more than he loved using them 😂. So much cool stuff just laying around!
Sure have some beautiful machines. All the extras just waiting to be installed . its as if you were ment to be there. I'm jealous and can only dream of machines like that now. Take care of them and your son or daughter will be using them.
@InheritanceMachining
Жыл бұрын
I definitely feel at home in the shop. Hopefully my kids will one day as well!
@michaelrice500
Жыл бұрын
This is all of us; our dream machines. 👏
I've just finished a side project. 2 days to make some big workshop storage shelves, a lot cheaper than the Lista drawer cupboards I really want. For some reason my wife insists on calling the workshop the garage. Back to real work next week. By the way an excellent side project is painting the workshop floor, cuts right down on dust and makes it easier to brush up.
@InheritanceMachining
Жыл бұрын
Very nice! You might have to hand a sign on the door. "WORKSHOP". to avoid confusion 😂 Im really considering this. I didn't realize how much dust was getting kicked up by sweeping! I see a dedicated shop vac in the near future as an interim solution!
@michaelrice500
Жыл бұрын
No one can afford Lista cabs except the USAF. But they do show up at DLA auctions now and then at a military base near you . . . . 😎
@billdoodson4232
Жыл бұрын
@@michaelrice500 I keep looking for them in auctions in the UK. More chance of finding a job lot of Unicorn Horns.
I started in machining in 1973 and worked my way up to prototype machinist. Thanks for the memories!
Gday, fantastic video and who doesn’t like side projects, quite often my day is overran with side projects which I really don’t mind at all, the mill is complete now, thanks for sharing, cheers
@InheritanceMachining
Жыл бұрын
I agree, I don't mind the little side adventures. It's all part of getting the shop to that perfect setup. Thanks as always!
wow, your 20 min video went by in what seemed like 5 minutes, that just shows how great your editing and content is, thanks!
@InheritanceMachining
Жыл бұрын
very much appreciated!!
Nice update! A tip? Replace the "main air hose" with a thicker one, one to two dimensions. Then branch out to each part of the machine(s) with regular hose. This allows you to reduce the power costs of the compressed air, you can actually save a lot. Make sure all connections are tight and not leaking.....
Regarding side-side projects: An air manifold ought to be a simple but interesting project, to replace that arrangement that you made at 9:20
@InheritanceMachining
Жыл бұрын
oh, that might be interesting... I do have NPT taps
Everyone should have a grandfather like yours. Wow
Man the first minute hit so hard. Adjusting the knee, awkwardly reaching up to get to the drawbar and the finger catching adjusters on the head. All those things drive me mad and its a workout on a busy day
absolutely awesome! Grandpa rules with all of his suprises for you.
"This scratches the part f my brain that wants to take EVERYTHING apart"..... OH YEAH! I have that same itch! When I was 12 years old, I completely disassembled our lawn mower to figure out why it wouldn't start - found that a wire in the magneto has broken - then fixed it, and put the mower back together.... and it ran for another 10 or 15 years! I ended up becoming an Aircraft Mechanic in the Air Force and worked on both Helicopters and F-18's! Meanwhile - I've done a ground up restoration on a motorcycle, and at 60, I'm STILL taking things apart and figuring out how they work!
Wow, machining is usually not my stuff, but I love these videos
This in my opinion was your most satisfying video yet! 😍
You have no idea how happy it made me to see you'd put up a new video! :D After watching it: Man, its so strange, I just love your videos, but you've only actually made 2 items(dont get me wrong, I know you made all the other parts to fix first 2). So I cant wait to see all the cool stuff you're make later :D But we all love a good side project too :)
@InheritanceMachining
Жыл бұрын
to be fair all the other tools I made may find more use than the collet blocks 😂 I've got all sorts of things I'll be making for sure. the list grows faster than I cross them off!
@nicosand86
Жыл бұрын
@@InheritanceMachining i can't wait. But those collet blocks are gonna go down in KZread machinshop history 😁😁
@InheritanceMachining
Жыл бұрын
haha I know right...
This is such a wholesome and nice channel - thank you very much!
@InheritanceMachining
Жыл бұрын
Much appreciated!
Just noticed your Bent insignia from Tau Beta Pi mounted on the wall next to your door. Congratulations!
Looking how a guy (who I’ll probably never meet) sweeps his workshop, is such a good thing to do on a summer Saturday night, while my girl wants to go out. No regrets.
I have to say, your calm and collected presentation is very nice. Love watching your videos while working or having them run in the background :)
@InheritanceMachining
Жыл бұрын
No way! Thanks Stefan. I've been learning things from you here and there for years. So that means a lot!
I rarely sweep the floors in my shop. I've determined the dust it stirs up creates a vicious cleaning cycle for me. I almost exclusively vacuum.
@InheritanceMachining
Жыл бұрын
Funny I didn't notice just how dusty it was until watching the footage back. I'm going to have to dedicated shop vac
@michaelrice500
Жыл бұрын
@@InheritanceMachining I highly recommend this one: Festool 574930 CT 26 E HEPA Dust Extractor Expensive, but it gets the small stuff that will eventually kill you, it's fairly quiet and holds an amazing amount of crap. Also has a bluetooth switch that goes on the business end so you can turn it on (and off) when you grab the hose.
@InheritanceMachining
Жыл бұрын
@@michaelrice500 now that is cool!
Very cool upgrades for your vertical milling machine
I LOVE how you show that projects beget side projects that themselves beget side (side) projects. Impressed you still stay on task and complete the *primary* project!
My favorite machining channel
I chuckled at each side project!
@InheritanceMachining
Жыл бұрын
😂 gonna be a tough record to beat
I know that I will have some good time as soon as my KZread bell rings about new video here 😊 BTW please don't be shy to make longer videos.
@InheritanceMachining
Жыл бұрын
😁 believe me, if I had the time they would be longer! or more frequent!
That was great. Thanks for sharing
@InheritanceMachining
Жыл бұрын
thanks!
You hit the nail on the head with how every simple project - that should really work right out of the box - requires so many extra unexpected steps that each can take much longer than the original work. We have probably all experienced this: I tell my family, "oh, this is easy; it's just going to be a half hour," and off we go on a six-hour excursion.
Tons done in one shot. Great new bells and whistles man!
It's kind of funny watching your videos in a somewhat random order. I can now see the before state of things that I've already seen during and after. The air hose manifold and several fixes to the mill (wobble, drive belt) among a couple of others. Also, removing the hydraulic press from in front of the bins!
My favorite channel right now! Wish I can build a Shop like that and hopefully one day give it to my son/grandsons...
@InheritanceMachining
Жыл бұрын
Thanks! It's definitely possible. You may just be eating ramen and hotdogs for a while 😂
@andrepradokrav
Жыл бұрын
@@InheritanceMachining well… I like rammen 😂
You are very lucky, first of all your grandfather must have been, or still is, a wonderful man who devoted a lot of his life to mechanics, which resulted in collecting all these machines and accessories. Secondly, you could have inherited all this equipment from your grandfather, and this was the beginning of your current adventure with mashining. Keep up the level, your projects and their execution is really great! Greetings from Poland, and I wish you further success in developing your yt channel.
This Guy is really living the Dream!
That is a nice looking functional mill.
for those who may be wanting this upgrade for their mill...the Z drive is supposed to be canted clockwise to allow room for the Y drive...thats why the hole pattern was different on the new part
@InheritanceMachining, as a grandfather I can tell you your grandfather is so proud of you for what you’re doing in his old shop. He’s beaming, in fact! As other folk have said on here, either the shop dust or tiny chips are getting into my eyes… i gotta keep wiping’em. I watch quite a few channels but NONE of them move me like your simple style, clear descriptions and folksy manner. I did my share of drafting earlier in life, too, and am continually amazed at how nicely you illustrate your concepts on paper! Please keep on keeping on until I get my measly little shop functional - to inspire me to get there!!
@InheritanceMachining
Жыл бұрын
You are very kind. Thank you so much for the kind words. And good luck on your own shop!
i like this " going sideways " alot
Glad I found this channel.
this is such a satisfying page
Yak shaving like a boss! 🎉
Honestly, it’s the same in everyone’s workshop. Thanks for the video mate 👍🇦🇺
@InheritanceMachining
Жыл бұрын
I have no doubt about that haha thanks, man!
Well done 👍👍👍. Thank you for sharing. Be safe 🇨🇦. No offence meant " But when you were a teenager and your grandfather took you under his wing to show you how to you use all those big man tools you were probably out there like you know "AWKWARD". You went off to study engineering at 18, and after his passing he is still looking after you with 3 mill improvements. What else is there in those boxes for you to discover.? "
@InheritanceMachining
Жыл бұрын
Thanks! My grandfather strangely had a way of instilling confidence when I was learning the machines. And the other tools long before then. Stepping up the the big boy machines felt more natural than was probably reasonable for someone my age at the time. Either that or I was reckless 😂
@michaelrice500
Жыл бұрын
@@InheritanceMachining Brilliance and recklessness know each other well and need one another. And someone to stand by when you fail. Out of the park, Grandpa.
Cool Machine Shop :D I'm very jealous, this Mill is gorgeous
Honestly getting in the habit of taking your last 15 minutes each day to sweep and tidy will pay you back more than you can imagine. Especially once a tiny part goes flying
@InheritanceMachining
Жыл бұрын
Im usually better about things like this, I swear! 😂
That floor after zip tying the air hoses was so satisfying
I would love seeing more of this. Granted, I would love seeing more of anything done in this shop, but side projects are fun
Yes I agree the Z axis handle is spooky. Maybe you can add a micro movement feature to eliminate handle
ASMR for machinists. Lovely content.
@InheritanceMachining
Жыл бұрын
😁 thanks
I'd have never thought I would enjoy machining. Thank you for making this interesting!
That was oilite bronze. Perfect sleeve bearing material.
my advice would be to get that vice off of its rotating base for rigidity and take the rotary table off, the extra weight will bend the table over time.
That is a lot of work in one day. Thanks for the fabulous video.
I had the overwhelming joy of installing all 3 of these at Hughes EDD in Lomita California when I was working for higermen and Nelson Compton California Milwright as an precision machine rebuilder, before working for Hughes EDD in lomita California as a prototype machinist, old da joy. Now A retired old man building and repairing guitars and bass guitars Yes Bob wood is easier to work with.
The whole side project thing really amuses me because one of my best friends suffers from heavy adhd and that’s literally him doing anything 😂 just one thing to another to another
I honestly find "side" projects as invigorating as "making" projects. So much so that I'm skewing towards tool restoration rather than the creative bent I started with. I've had to give up my workshop for the next couple of years. I'm so thankful for KZread and content creators like yourself for keeping be inspired, even if I may only live vicariously for the time being.
@InheritanceMachining
Жыл бұрын
Happy to share! I enjoy the side projects as well, though I don't really have a choice a lot of the time 😂
Very nice upgrades. I need to do this also. I have an Enco Mill. Thanks for sharing. Take care, Ed.
Outstanding sequence of operations. Reminiscent of the old “Connections” series of shows when TV was still worth watching.
@InheritanceMachining
Жыл бұрын
Thank you! I'm not familiar with that show but you have me interested now
👍 love them SIDE PROJECTS
oh sheesh, you doing all the little things while getting to what you need to do reminds me of my boss trying to do anything at work
I find it fascinating where you, a self proclaimed massive overdoer, draw your lines.
Officially binge watching your channel!
@InheritanceMachining
Жыл бұрын
I officially have enough to binge 😂 enjoy!
side projects are just cathartic to complete...and to watch you do, thanks for the content
@InheritanceMachining
Жыл бұрын
I find most shop work cathartic. It's a big reason I love it so much. Thanks for watching!
Something that might help with air distribution could be an overhead manifold.
In all of your videos my favourite part is always the side projects so an entire side project video is pretty great.
The mill has some very nice upgrades. Nice installations and fabrication. That's for sharing. Take care, Ed.
I could watch your videos all day long!!
The modifications needed to get that powerfeed finished would have bordered on making me want to throw the whole thing out the window...BUT in the end it was more than worth it, looks like. Great job on everything you accomplished!
A superb watch 👏👏👌 Cheers Chris
@InheritanceMachining
10 ай бұрын
Thanks!
As always, a great pleasure watching your content. Trying to get organized, the bane of every machinist.
@InheritanceMachining
Жыл бұрын
there always seems to be a better way to organize one's tools! Thanks as always!
good video--thanks for your time
@InheritanceMachining
Жыл бұрын
thanks!
OMG!!! This is beyond awesome!!
@InheritanceMachining
Жыл бұрын
thank you 😁
I love seeing your channel grow so nice. Congratulations!
YES, THOSE ARE GREAT UPGRADES AND GREAT VIDEOS...SEE YOU WHEN...
Thanks for taking the time and effort to post these videos. You’re doing a great job.
@InheritanceMachining
Жыл бұрын
much appreciated!