I love this video... You honestly did an awesome job... !!! That truck looks absolutely good...

I’m mostly into older jdm cars but recently purchased a 97xlt extended cab 6 cylinder only though . Came with a snugtop to match. Been following along with your rig build and your truck is dope man. The 9inch lift you added so nice man. Keep up the cool videos🤙🏽

2018 still the loudest and best sounding 👌🏽

Grapps and no cats💪🏻

@aaronhuff4484

3 жыл бұрын

Makes mo sense

looks good! Larry is coming around pretty quick

I’ve got 3.5” spindles, 1.5” lift coils, 2” rear lift blocks and 3” body lift sitting on 35s on my 98 2wd. I love it.

@orlandosales5218

2 жыл бұрын

Did you have to change anything? Like upper control arms or ball joints?

Enjoyed your content!!! - Your Newest subscriber

Nice I'm thinking bout lifting mines! Thanks for the Install videos save more money and watch and learn! Awesome like the way f150 sounds!

I can smell drop shackles coming 👌🏻

@daviddelacruz3196

4 жыл бұрын

How much was it?

I just bought 3 inch lift spindles for my 97 single cab flareside f-150. I’m excited as hell to put em on

Dude 22inch chrome slide would look sooooo beautiful on ths truck

I just got one and lovin it. Solid truck. You still got a good lookin truck

I love your videos. They are super helpful. I have a 06 f150 2wd and after watching this I may actually go for the spindle lift over a 2.5 level. Was it easy to fit 35s with the spindle lift? Did you have any rubbing or have to do any trimming?

Ford pre-runner! Ground clearance helps in big snow even when you don't have 4wd. I know...believe dat.

Why is the stock tail lights on baby squat ?

Always enjoy your content. Thanks, sir!

If You Add a 3 inch Spacer On The Coil Springs Would It Make Your Truck Higher Than It Is Or Would It Just Reinforce The Suspension Since You Already Lifted The Truck With The Spindles ?

Hell yeah that’s hard , I’m deff installing one on my mine !

Can't wait to see what you do to this one, looking forward to the crazy transformation lol

That ford is lookin good Excited to see the upcoming wheel setup You should get new headlights and grille soon that would make it menacingly clean 🤘🏻🤘🏻

Bed line or something similar on the whole truck would be dope. Whatever you do can’t wait to see the build👌🏽

Wheels+tires restore those headlights tint

i am about to put a 3in spindle lift with 2in lift coil springs on my 01 2wd gmc sierra... may get drop shackles too

FYI. "Cotter" pins. Just thought you'd like to know.

You mentioned the spindle lift opens the gap of the upper and lower arms .... that’s not how it works it only relocates the the spindle . Otherwise it would mess with the ifs Alignment... some vehicles can have more lift or less from a spindle lift all depends on the factory locations of the spindle on the factory spindle ... like vids keep them coming

I just bought mine I’m waiting in the mail

Looks great man!

You live in bama same man

Let that tire rub and beat the box for koonce #longlivekoonce 🙏🏾❤️

I just lift my 03 Silverado 3inch the same way looks great

where is the dust shield that was removed? did you reinstall?

Did you get a aftermarket longer? Control arm for your truck. Larry.

Cant wait to see it with new rims and tires !!

Ford sounds good. I have the exact setup on my truck that is similar to it. But Baby Squat sounds better. Man that is a good looking truck and she fits her looks

I like the teal green color truck

Hi I just found you Video And got cuestión On back disc not have to have the cap for grease??

I enjoyed this informative video. Thank you

New headlights and wheels and tires an tow mirrors 👍💯

thought that hammer would hit me

How much was this lift I have the same Ford

How did you find what to torque everything to? Or could you just tell me what torque you used? I've looked online and get a bunch of different answers and would just like to know what you used for all the bolts

So the kit came with rear struts as well. Did you put blocks in the rear? Or does it kind of level it without the blocks? Are the rear struts okay to put in without putting in the rear blocks?

I’m about to do complete brakes suspension and steering all around on my 99 f150 4.6 2wd

@maxz4065

3 жыл бұрын

Im in the same boat with same engine. I just need to pull the trigger already and get my kit.

@Elon_Trump

3 жыл бұрын

@@maxz4065 I did the lift and everything else while I was down there. took about 5 hours with a knowledgeable friend and lots of tools. I fell in love with the truck all over again. new tires and took her in for an alignment. like riding brand new

@ernievilla6840

Жыл бұрын

@@Elon_Trump any pics

@ernievilla6840

Жыл бұрын

@@Elon_Trump how did effect your gas mileage?

@Elon_Trump

Жыл бұрын

@@ernievilla6840 not bad at all or at least not very noticeable I also check the tires once a month or so to keep them at proper pressure. She is still on the road and drives great.

Larry looking good leaning like that needs to be lower in the back tho love the video's keep up the great content 🤙🇺🇸

I currently have 2” loaded struts could I add a 3” spindle?

Looks great. Gonna attack this over the weekend

You would think it's better to use leverage to take off the cap on the wheel and he whips out a half inch flat head💀 anyway you're videos are great I've been watching for about a year now after I got my first truck

After the 3” spindle lift and the bigger tires, did you have to regear your rear axle? I’m wanting to put the same lift, put 33” tires on, but I’m worried that my 3.55 axle can’t handle the tires.

Hey bud I found a 5.5in spindle lift from spindlesource what would I have to change other then the spindles?

Clear headlights and Mud Grapps.... just some ideas

Drop shackles offset and graps😻

But this was a helpful video. Thank you👍

Factory does have blocks

I have a truck relatively simaliar to your f150. Mine is also 2wd. And everyone else in my family basically has a bigger/4wd truck. And it irritates me. So I'm gonna have to get my P.o.s a lift kit just to make myself feel better.😂😥

You put on them blocks too or just shocks and spindles ?

Just found your channel love watching the Larry episodes. How far out did this spindle lift move the tires out from the body?

New headlights taillights and wheels and tires👌🏻

did you spin and torque the rotor properly to seat the bearing? doesn't look like you did from the video.

Is there a spindle for a 2018 Chevrolet Silverado 2WD that doesn’t require new rims

Did u put on the blocks in the back or did u leave it the same

Needs clear headlights, a big ole cb whip, and window tint

@landon7927

4 жыл бұрын

Maybe drop shackles too

Did you put any blocks in the rear or is the rear completely stock? I really want to do this but I have a completely stock 2001 F150!

Hey ask the shock absorbers are the same size new as used. Excuse me

So do I need to do anything to the bed of the truck also or the splindle just lifts up everything? I have the same truck.

Very cool and can’t wait to do this too my truck. So are these just stock springs on your truck? My current setup is cut springs and lowered, very sick of this rough ride and setup. I see the 3” lift kit on the rough country website but they only offer the 2” leveling kit springs? Should I purchase these over stock or?

I got 98 2wd same lift but a 3 inch body lift also clears 20x12 and 33s

I’m putting the same lift on my 2002 Ford F-150 2WD and I’m having trouble removing the stock spindles. I’m beating the hell out of it to try getting it out. Any recommendations? 8:45

Do you know what color the bottom half of your 2 tone is? Mine is red with that silver and I need to color match the upper piece on my bumper, and I’m sure both silver 2 tones are the same

Did you not install the blocks in the back?

Just installed this on my 03 and now I’m having a rubbing sound which sounds like my abs sensor is squealing. Any issue with this for you?

Did u have ABS sensor rubbing slightly on spline after. I notified mine doing it, trying to figur out what to do

Where can I buy that kit !!?? Thanks for the vid!!!

where did you get the parts?

Do a bubba look. Keep the stocks and throw some 35s on it

How big of a wheel spacers did you end up putting in the rear

Did you install the rear blocks or left the rear stock?

Did you use the rear shocks that came with the new kit ? I want to buy the same kit but only want to install the front

Im about to do the spindle lift do i have to get another kind of larger shocks? Cause i just had all mine changed out 2 months ago

bro how many trucks you finna get?😂👌🏼

@lmfscrew

4 жыл бұрын

I want them all lol

@imfscew do you have to get new shocks when you install any spindle lift?

We’re did u buy kit from

does it need a steering stabilizer

Did you have to shave off the lower Control Arms for the lift spindles to fit?

@lmfscrew

3 жыл бұрын

No

hey what's the rim order number for 'ol larry.? I want the same but can't find them,thanks

Nice truck,how much lift in the back

Spindles on my 2wd Jeep Grand Cherokee...

What is the best lift for a ‘01 f150 lariat ? That isn’t super expensive

could I run a 5 inch rough country lift for a four-wheel-drive on my 2000 model F150 but I have a 2w

Do you have to get a alliment after

Can you make a vid on what your all gonna do to the truck.

Just did this lift but when i hit around 70 its get pretty bumpy. Any thoughts?

First comment again Notification gang

What size tires were on it I this video?

Good Shyt main👍

This truck needs mud grapps and cut them cats off ‼️

What do you recommend for a 2000 f150 4x4 lift?

Ouuuuu baby squat angry on start up😍

Where did you get your taillights on your Silverado?

Where did you buy your shocks at

How long have u had larry and how many videos have u made with it?