Marvelous teaching for us that are easily frustrated. Thank you for taking the time and helping us out.

@svcruza

4 жыл бұрын

It's my pleasure buddy if there's anything else I can help with please let me know and I'll make a video covering that.

You covered all of the Basic's! Great tutorial! Thank You!

This was super helpful for me figuring out wtf was going on with my bike despite asking in forums about it. Specifically the fuel pump priming and what that sounds like with the fuel pump relay going off too. I wasn't getting any feedback from people about it so I just started googling and your video popped up so I wanted to say thanks for doing this man.

@svcruza

Ай бұрын

You're welcome brother, I'm glad this video helped out where forums fell short...that's why I made it. If there is any other way I can help let me know and I'll see what I can do.

@WaterMelon_8090

Ай бұрын

You replying to him 4 years after the video fist came out is crazy your the goat. (video helped me out as well)

@svcruza

Ай бұрын

@@WaterMelon_8090 I will always do what I can to help my viewers because there is a reason why you found my video, weather it's for entertainment purposes or educational reasons, not everyone can afford dealership prices or any shananagins they come up with. I'm still actively making content on my own projects or videos answering questions for viewers. Im always around so if you have any questions please feel free to contact me here or my email svcruza18@gmail.com. Again thank you for the comment, its greatly appreciated. 😎✌

This is a very detailed and helpful video! You know your stuff. Thanks!

Yes thx for the info. I had a hunch but having verify all these things is a great help. Especially the era tip on tank.

I don’t hear the whining noise when I turn the key of my Yamaha FZ6R. Thank you for the video man I will try this my next day off👍🏻👍🏻👍🏻

Good advice! Also if you suspect a bad relay, you can switch out the fuel pump relay for another on your bike. car of the same type. It will be numbered the same. Horn relay is one that may be used.

Dude you're a legend making this video thanks

Life saver buddy, thanks mate.

Great video! Thanks for the help.

Thanks for showing each step of the fuel pump problems

@svcruza

2 жыл бұрын

My pleasure brother! If you are having any issues or problems, please feel free to ask.

very explanation and short way to check the fuel pump.....thanks i was very handy

Very informative- mucho thanx.

Thank you for making this learned some good info

@svcruza

3 жыл бұрын

You're most welcome, that's what I'm here for. 😎👍

Bro, best video ever dealing with this issue... thanks bro

@svcruza

4 жыл бұрын

You're welcome dude, I did what I could to ease the headaches of those with this problem. 😎

@SemajWilliams77

4 жыл бұрын

You said you made a video breaking down the pump.... can you send me that link

@svcruza

4 жыл бұрын

kzread.info/dash/bejne/a6xpqLp7lNuqhKw.html The video breaking it down was taken down 2 years ago because the audio didnt download and the quality sucked.

@svcruza

4 жыл бұрын

Just keep in mind when disassembling the unit to "take your time " and remember how it came apart. Take pictures or video if you have to. Trust me it helps.

Brilliant video, thank you 👍👍👍👍

Awesome, trying to help, love it

very good video every time got problems with fuel i know where to look

Good job man!

Appreciate it you helped me diagnose the problem pushed my bike 2 miles all because of a fuse

@svcruza

2 жыл бұрын

I've been there and learned of the fuse issue that day which is why I put that part in the video. I try to help other people from my personal experiences. Let me know if there is anything I may be able to help you with bud.

Thank you for your help and information Its really helpful

@svcruza

3 жыл бұрын

No problem dude, I do my best to educate folks like yourself so they can do things on their own instead of having to take it to a mechanic or dealership and get ripped off or way over charged. Especially in this day and age. Have a blessed day buddy. 😎✌

@bekhaledkaissar8463

3 жыл бұрын

@@svcruza thank you brother its totally true man..and I'm thinking to buy a R1 yamaha 2002 needs some work (not big work) oil cooler and feul pump so I'm watching your vedios to learn again thank you very much 😊

THANKS FOR SHARING

@svcruza

4 жыл бұрын

You are most welcome sir. 😎

Lovely video 📹

very imformative brother thank you for this

@svcruza

Жыл бұрын

You're welcome brother!

Thank you buddy ❤

Thank you, my bike won't start I tried carburetor jet cleaning, got battery checked up, whan I trunk the key on light trunk on but no fuel pump noise gonna check the relay hope after this bike runs. Thank you for sharing

Nice explanation of standard troubleshooting tips. One correction... at the 15 minute mark of your video you essentially replace your fuse with your ohm meter. You should never have current applied to any circuit that you are attempting to check for resistance. If you turn your key on, that is exactly what will happen. Otherwise you will have an open circuit until you turn the key on, as evident from your test...

If you’re starting your bike and low on fuel... and have to give your bike some throttle to keep it running and from dying.... BAD Fuel Pump. I delayed this for awhile... by keeping the gas topped off then it finally gave out lol. Took me 10 mins to pop in a new pump on my 04 zx6r. If you work on cars... don’t nuke it.. it’s all the same (motorcycles) lol.

@laflamesplashin2539

3 жыл бұрын

Did you change the whole assembly or just the little pump

@CornratedGhost

3 жыл бұрын

LAFLAME SPLASHIN just the little pump. Just be careful with the wires on the assembly if you have an older bike.

@brandonkirby7940

Жыл бұрын

Damn this is my first bike I don't have the air filter whatever it's called over the carbs is that something that will cause me problem

@AverageF30

3 ай бұрын

Hey buddy I have a r6 and in order to keep it running I have you twist the throttle and if I don’t it dies you think I should replace the fuel pump

@CornratedGhost

3 ай бұрын

@@AverageF30 or a kinked fuel line under the tank.

Whats it mean when you drain water from the tank, blow the last of the water out the empty spark plug hole then fill it back up with fuel then the full gauge doesn't read a full tank and it stalls a few seconds after starting if it manages to start at all?

Thanks

@svcruza

4 жыл бұрын

You're welcome John. 😎👍

Really a nice practical hands on this is what things look like and where to find them video.

@svcruza

4 жыл бұрын

Thank you Peter, I did my best and tried not to miss anything.

Yes the cap is stock and it did this before and I change the fuel check valve and it crank right back up.

Sick paint

@svcruza

4 жыл бұрын

Thank dude it's marble.

easier to tell when its bad when its fully done for.. harder to know when its going bad. and still able to keep restarting and runs good most the time.. im hoping im having a bad fuel pump issue.. it will stall on me.. i get these stutters / misfires sometimes.. other times it runs like a champ.. but if it does attempt to stall. i notice the engine still on but when i try to give it fuel nothing happen then it will stall.. after that it usually take a couple tries to get it to start up to maybe a minute or so.. then it will start again.. and then maybe fine for rest of ride or keep happening randomly... its a pain..so not even sure if its the fuel pump.. i order a spark plug a fuel filter a fuel pump and a injector.. hopefully it fix it. i hasnt stranded me yet and i still ride it but ya knock on wood its all i got.. lol gotta wait for parts and take it to shop.. i never changed all that stuff before and dont have a manual for my bike.. i have around 25k on my bike in around 3 years now and never had any issues like this.. so im just guessing. though someone was saying a faulty wire or water in the system can do the same.. so hopefully i didnt buy a couple hundred in parts for nothing.. but its never bad to put new parts on i guess. luckily grom parts are a little cheaper then bigger bikes. today on ride to work work fine full way on last turn into housing complex it stall out.. when i was leaving it stalled once.. as soon as i got on main road it drive normal rest of ride.. just saying how wierd its acting.. other day died twice on ride to work.. some days doesnt do it..

I have a question man I just bought a 2004 zzr 1200 and I can ride it for about 30 minutes perfectly fine with no issues and then it dies and I can get it to start but it will barley idle. It’s kind of confusing to explain but my dad thinks it’s the fuel pump, just getting a second opinion before I buy a 160$ fuel pump

Quick question. I have a 2008 kawasaki zx6r that I am only seeing the back and nutural lights on the dash. No RMPs or temperature readings.

@thackerybinx2755

Жыл бұрын

same issue

Thank you. I will check why my fuel pump/relay action. No sound when I turn the ignition/kill switch to the on position. 2015 Yamaha.

awesome

I put my hand on my Burgman 400 2005 gas cap and felt the fuel pump come on. Thanks. 😊

Fuel pump went out on me riding down 75 in Atlanta. Felt the bike lose power, so I coasted off the nearest ramp into a grocery store. Diagnosed the problem to be fuel pump. Like you, had no spare. I rerouted fuel, bypassing pump, directly from tank to carburetor. Try that next time if your bike is carburated. The gravity fed method. May not work on fuel injection system.

@philzail2532

2 жыл бұрын

His bike is fuel injected, won't work. It's a high pressure pump.

I know this video is old but I need some help. I got a 2007 Zx-10R bike bogs at 20-30MPH only. Then at 10K rpm the bike can’t go any higher. I cleaned my fuel filter and it helped slightly. And ideas would be appreciated thanks

@svcruza

2 жыл бұрын

The Gen 3 was the first of the ZX-10's to use the secondary injectors. With 8 injectors, the top 4 pick up in the high RPMs while the lower set drops out. You are having a fueling issue my friend. Either a fuel pump or fuel flow problem. If the secondary (high rpm) injectors dont have the proper flow AND pressure, the engine will top out at a certain RPM. The primary injectors start to shut down at around 8k RPM while the secondary injectors start to increase at that point. There's a crossover range around that mark where one shuts down and the other picks up as the RPMs increase. My opinion bro, your pump is failing so change that and be sure to change your air filter, these bike love to breath! Pumps are usually are $50 and get a new fuel filter as well. Tip: while the tank is off, clean it and wash it out. Be sure there's no sediments that have collected at the bottom over the years. Hope this helps dude.

The problem could also be corrosion in the connector that feeds the fuel pump .

Do u have to have the tip-over sensor plugged in for the fuel pump to prime

@svcruza

Жыл бұрын

Yes or the computer thinks the bike is on its side and will refuse to start or energize the fuel injectors and pump.

Hey I have an 07 zx6 r, the bike was running good, it did feel like the full power was not there. My clutch cable broke so I replaced it once I did, now my bikes having a hard time picking up speed. Its like after 1st gear I go into 2nd i cant pass 70 mph, my rpm will end up redline if I full throttle trying to speed passed 70mph

@svcruza

Жыл бұрын

The 4 things I would check would be easiest to most difficult to repair or access. 1. I would first check the fuel pump itself and make sure the fuel filter screen at the bottom is clean and not clogged with junk. That motor has 2 sets of fuel injectors, the primary injectors operate from idle to 8k rpm and the secondary injectors transition from 8k rpm and up. So check your fuel flow. Also check your fuel pressure regulator because that will restrict fuel flow as well. 2. Check the fuel injectors and make sure they are operating as designed. 3. Take a look at the clutch plates to see if they need replacement. 4. Make sure there isnt anything obstructing air flow, check the filter because a clogged filter will hinder performance. Hopefully this helps, if there is anything else I can come up with I'll let you know. Good luck brother. 😎

Hey I’m so lost I have a 2000 sv650 it has spark, air and fuel. It cranks over really good and wants to start but I don’t hear the fuel pump whining. Could that be an issue?

@svcruza

8 ай бұрын

Spray some starter fluid in the intake and see if the bike will bark. If it does, then that means you have a fuel delivery problem so the next easy thing to check is the fuel pump relay. Tap it a few good times with like a lighter or pocket knife. Enought to break up the carbon on the points in the relay. You can put your finger on the relay at the same time you turn on the key and feel for a click in the relay. Check that first before diving into a new fuel pump. Hope this help brother.

You forgot to put the fuel fuse back before checking for pump sound, just an observation.

How could i tell if the pump is working, but not well? i can hear the pump engage when i turn the ignition on, but i'm having very similar symptoms of a bad pump but the bike will run for 15 or 20 minutes, then die and not start for a while

how can you pull the fuse and then check for the noise at the pump...

did you leave the fuel fuse out when you listened to the tank?

@svcruza

3 жыл бұрын

No I put the fuse back in. I just forgot to record that part.

Thanks for the information. I have a 2005 Kawasaki zx6r and everytime I try to turn my bike on it never starts but flashes the FI light. Does this sound like a dirty or bad fuel pump or injectors? My bike was sitting for a couple years because I didn't ride it so I am assuming maybe bad gas? Any advice would be greatly appreciated! :)

@svcruza

2 жыл бұрын

Absolutely as a matter of fact I ran into the very same problem with that ridiculous FI light and my solution to that was changing the oil pressure sensor and as a matter of fact I have a video that covered it so let me add that link on here so you can see that video

@svcruza

2 жыл бұрын

kzread.info/dash/bejne/h61pj5eufNKcabQ.html Watch this, it helped me and it may help you. If your bike is stumbling, top off with premium fuel and seafoam in the tank. ALSO....pull out your fuel pump and make sure the fuel filter screen at the bottom of the pump is clean and not clogged, that will starve your bike of fuel causing a lean mixture and rough idle. Not to mention it will burn up your fuel pump alone.

@chaoticsmooth

2 жыл бұрын

Thanks alot man I appreciate the advice! I'll try all these and let you know any updates!

Thank you for this very useful video! Similar thing, I think, happened to me as well. When I was riding my SV650 gen3, after 1-2 minutes from taking off, the bike started to stutter like running out of fuel and eventually shut the engine off. I started bike up and the same thing happened 1-2 minutes later again. I pulled it to my mechanic and still don't know what caused this. Since the bike starts and can go little, do you think that the problem is the fuel pump filter?

@svcruza

2 жыл бұрын

My solution was in the next video, I ended up replacing the fuel pressure regulator but in order to do that, I had to purchase the black cartridge that the fuel pump lives in. The fuel pressure regulator is part of that cartridge which was like $257 from partzilla.com. If the regulator is stuck open or closed, it will force the bike into a stall with either a too lean mixture or too rich. It wouldn't hurt to replace the fuel filter screen while you've got the pump out. Let me know if you still have issues because I have many more ideas...lol.

@mstfsircold

2 жыл бұрын

@@svcruza Alright man, thanks a lot for the quick reply. I'll let you know when my issue is figured out.

@mstfsircold

2 жыл бұрын

Hi again, the issue turned out to be fuel pump. I guess it gets hot and turns itself off. I replaced it and now the bike runs just fine :)

Thanks. I think this is my bike's problem.

Is it possible to have a seized fuel pump after not being started for 2.5 years, stored in an unheated garage? On my 2007 SV650, I have continuity on the fuse, hearing relay clicking, TB valves doing their thing, cranks fine, no codes...but definitely no priming sound either. After letting it soak in fresh gas and seafoam, I'm thinking to try jumping the pump directly via the connector to the pump. Think it's worth a shot to confirm if fuel pump issue? I also made the mistake of draining the old fuel couple weeks before, but forgetting to put new fuel in before cranking it...so she was probably dry af 🤦‍♂️

@svcruza

Ай бұрын

Hey bud did you ever get your bike started?

@rklos11

Ай бұрын

@@svcruza not yet LOL. Hope to work on it here after wrapping up house rennos.

Do you disconnect the battery when you check the resistance?

@svcruza

Жыл бұрын

Yes

I'd like to add that modern carbureted motorcycles also use electric mechanical fuel pumps.

@svcruza

2 жыл бұрын

Not to mention some also operate via vacuum line to a fuel valve and open only under a vacuum.

My fuel pump has started this weird strained sound only on the first cold start. Sounds like its got emphysema. No idea whats wrong but its been doing it for months. Starts no problem runs as normal just sounds like ass. Wondering if a pinched fuel line could do it?

@svcruza

Ай бұрын

What kind of bike do you have?

@unrulytoast1189

Ай бұрын

@@svcruza its an 09 cbr600rr

I know this is an old video so it’s a shot in the dark for a response, but my fuel pump makes the noise but still the bike isnt getting fuel.. could the fuel pump still be bad or more likely a fuse or relay

@svcruza

2 жыл бұрын

What kind of bike do you have? If the pump is making the noise then the pump should be fine but its entirely possible the pump is bad. If the pump is coming on then the relay is working properly. If the pump is turning on, and the bike isnt starting, check your fuel pressure regulator.

What do I do if every time I kick it over the fuel pump primes on a ybr 125 yamaha

Hello my mt-07 fuel pump does the whining sound at the beginning, but it refuses to start but when it later start and I am on the road , when I do any slow it goes off . Do you know if this is still the fuel pump issue ?

@svcruza

Жыл бұрын

Oh man I've got so many questions. The whine is normal because that's the priming...does it hesitate to start? When its running, is the idol rough or is it fairly smooth? When you ride, does it hesitate or stumble and when your slowing down, does it die right away or slowly kill itself?

@donmo625

Жыл бұрын

@@svcruza yes it hesistate to start and it goes off after 30 seconds by googling , true idle is not smooth , when running and I am on the road sometimes it suddenly increases speed and when I am speeding sometimes it suddenly decreases, when I am about to come to a stop at a light and I down shift , it turns off , then it hesitate to turn on till after many tries , I tried removing the 02 sensor today but no changes

@donmo625

Жыл бұрын

@@svcruza when it is running it runs smooth except for when I lift my hand off the throttle then it starts giving me sign that it want to die , when it’s idle it can’t last 1 mins it will go off . When I come to a traffic stop it goes off except I keep reving which is annoying to people around .

@svcruza

Жыл бұрын

@@donmo625 ok so from what I understand, it sounds as though the problem isnt consistant so your fuel pump should be fine. All signs point to a fuel pressure regulator failure. This component is or should be located on the fuel pump assembly in the tank. So while you're in the tank and have the pump assembly out, if I was you, I would replace the pump and pressure regulator so you wont have issues again.

@donmo625

Жыл бұрын

@@svcruza oh thank you so much, I will do so and give you a feedback .

Is that Kemso f/p an OEM?..I'm running a Quantum in my Ducati & after 2yrs it's failed.

@svcruza

2 жыл бұрын

It was not an OEM pump. The last OEM pump gave up on me and the Kemso pump works fantastic even after 2 years of continuous everyday riding.

You have my Brother Ben shirt on 🤟🏿🏍🏍🤟🏿

@svcruza

2 жыл бұрын

Metz Machines....yeah he helped me with a new battery tray for the bike and I gave him a shout out in a few videos, so as part advertising he sent me a shirt so I can add it to my channel.

i might have a bad fuel pump, but bike doesnt crank when i have fuel pump relay attached, but it cranks when its off, could it be the fuel pump or wiring? and i had to directly hook up my fuel pump to the battery and it turned but then stopped, so i ordered a whole new one , just dont want to swap it out to short this pump, and ideas?

@svcruza

4 жыл бұрын

In the video I described the relay part and it sounds like your relay may be stuck. Tap it a few times with the handle of a screwdriver or something small like a closed pocketknife or lighter to break the relay contacts free. Remember they can develop carbon on the points or dust. If it cranks after you've done that, change your relay because the pump is fine.

@Timeless_Fpv

4 жыл бұрын

@@svcruza i had put back on the relay and detached the pump the bike cranks, i attach pump back on and when i try to start it, no crank, the lights on dash just dim when i try to start it,, so i might of shorted the actual pump when i jumped it straight to the battery. i already bought a replacement relay too

Hey i have an 05 sv650 and I’m running into an odd issue. When I flip my key on (not starting the bike) I hear the fuel pump whine for 5 seconds then I turn my bike on (which is normal) however when I let it idle for a few mins then give it gas the bike turns off. And Everytime I’m riding and I down shift or sometimes come to a stop it shuts off. The bike starts back up right away and I ride for like a few seconds then it turns off again. I ran thru everything and couldn’t pinpoint the problem. Your feedback is appropriated. Btw thanks for the video it helped me test a few more things.

@svcruza

4 жыл бұрын

Hey bud I know exactly what you are talking about and i have 2 videos covering this topic. The 2 things that contribute to this problem is your fuel pump filter screen is clogged (10% probability), and your main problem is the fuel pressure regulator (90% probability). kzread.info/dash/bejne/qqacu9WThNbHZJs.html ....after this video then watch..."A NEW POINT OF VIEW" kzread.info/dash/bejne/h4akyql8hNzaeKg.html Hope that helps.

@abdul-eq7wp

4 жыл бұрын

SVCruza hey brotha, just watched your videos and I’ll try chainring the fuel pressure regulator and see where that takes me. Appreciate your help! Great content btw

@abdul-eq7wp

4 жыл бұрын

SVCruza idk what’s wrong with my spelling in your comments 😂

Hi I got a 2000 CBR 600 f4i and my fuel pump don't prime and my relay dont make a noise can u help me pls my bike doesn't want to turn over

@svcruza

3 жыл бұрын

ok according to what you are saying, what i would do is check the charge on your battery with a miltimeter and see if you have a full 12volts. then next i would swap out the relay because it may be stuck open due to carbon buildup on the contacts inside. take the relay out and tap it on something to possibly knock it loose. if the bike starts working after that then you know that the relay was your issue. let me know what happens after you do this. this is a common issue with all relays.

Question. If the pump makes the buzzzzzz. Does it mean it's working 100 percent. Or is it possible that it's buzzing but still be bad? Thanks

@svcruza

4 жыл бұрын

If the pump is making a high wine noise at the start up it should be ok, because that is the pump priming the fuel system, they are usually pretty quiet. However if it's making any other noises out of the norm, then I wouldn't chance it to leave me stuck on the side of the road. (Embarrassing) I personally would change it out to avoid that situation. Pumps are cheap, I used Kemso in my bike and I haven't had any issues. Hope this helps dude.

@Zx14rrrrrrrrrrr

4 жыл бұрын

@@svcruza yea mine is making the normal whine sound. I'm just wondering if it can sound good and still be bad

Hows is it gonna turn on when u pulled the fuse out

@svcruza

4 жыл бұрын

It wasnt, I was checking continuity or resistance in the circuit, then I put the fuse back.

Does the bike need to be turned on when checking the fuse block with multi-meter ?

@svcruza

4 жыл бұрын

That's a good question Nick, I'm glad you asked. Some folks actually think they need power in the system just to check it however that is not true. You can ohm out a fuel pump or check its continuity. The ohm test is most effective because it will let you know the condition of the motor windings in the pump. It will let you know if they are grounded out or not. If you get (OL) or (open loop) that means the motor is bad. If you get a reading with numbers for example: 0.0002 or 0.0001, you're getting resistance which means the motor is good. Hope this helps dude.

@svcruza

4 жыл бұрын

One thing you should remember, NEVER use the multi meter on ignition coils with power on and try to turn the engine. You will freakin FRY your meter and hate yourself for doing that...lol. learn from my mistakes. You can test the coils with power on but DONT turn the engine.

@rhett4027

4 жыл бұрын

Thanks, Man! Never take your Honda to a dealer or any kind of shop where all you see around the place are cruisers. And, don't ever say you replaced the fuel pump to a mechanic who didn't perform the switch himself because he will just give up right there like I did at Tesch motors in Port Charlotte FL. The mechanic is a dumb ass

i have a 05 suzuki gsxr 600 i replace the fuel pump put everything together its start but i look inside the gas tank but it was bubbling inside the tank it that normal at all or do i have too replace the whole assembly

@svcruza

2 жыл бұрын

That is a good question, I'm not sure why you are getting bubbles unless the pump connects aren't tight or installed incorrectly. Let me read up on that bikes design and I'll get back to you asap.

@vrodriguez7767

2 жыл бұрын

@@svcruza they said it's the fuel pump regulator is bad

@svcruza

2 жыл бұрын

Yeah I concur, if that fuel pressure regulator diaphragm is bad then you would certainly get bubbles from that. Cheap fix if you buy that part from partzilla.com .

How come your multi meter didn't tone out when you tested the fuse at the end... it should have toned since the fuse wasn't shot....

@svcruza

2 жыл бұрын

My multimeter tone was given to me by my college teacher so it's been used for many years. The tone signal barely works, sometimes it does and other times it doesn't but everything else works perfectly. The little tone is just tired I guess lmao. Besides I never trust the tone, I was taught to trust the numbers. I apologize for the confusion but that's my situation.

Hello please I need your experience… i have honda nc750x 2016 … it have a problem in starting up in the morning.. its works after minimum 2 tries … ps the spark plugs and air filter , oil and oil filter are new as well… so the the problem could be !!!

@svcruza

Жыл бұрын

Okay well I've got some questions first to try to determine what all is wrong with it, that bike is fuel injected so if you put new plugs into the bike my real question is do you by chance happen to have a trouble code that's coming up on the screen? Does the bike have any hard time actually starting or turning over? Have you checked your battery to see if you have the correct voltage on the battery you should have a minimum of 12 V a maximum of about 14 V. When was the last time you fired up the bike and actually took it for a ride? Has the bike been sitting for awhile for the winter and this is the first time you're trying to ride it after the winter because it could be possible you may have bad gas. Do you know if the fuel pump is actually turning on based upon the three easy ways list in the video. So if you could please give me the full rundown of what condition the bike is in when was the last time you rode the bike. And when you try to start it does it stumble before starting? Because a lot of things could lead to this problem.

@svcruza

Жыл бұрын

Another thing that I was just thinking about is you might have a clogged up fuel filter which the filter I think on those bikes is connected to the bottom of the fuel pump so if the fuel is fairly old or you haven't changed it in a while it's very possible that the pickup fuel screen or the fuel filter could be clogged preventing the proper fuel pressure to allow the bike to run or stay running. This is a very common problem

@mahersoukieh6464

Жыл бұрын

@@svcruza the battery is also new and right for the bike .. and im using the bike daily what ever the weather is .. actually it was happening when starting up the very cold weather… but now is happening no matter the weather is … and this problem it starts be worse after oil and oil filter and air filter change 2 weeks before

@svcruza

Жыл бұрын

Okay well if you're saying all the usual maintenance items have been done then the only thing that I can think of on a fuel injected bike like that would be either bad fuel which you might be able to help it along with some octane booster about 1 full bottles worth, you might have a clogged up fuel filter which is inside the fuel tank connected to the bottom of the fuel pump, or it is very possible that your fuel pressure regulator is going bad. Now if the bike just happened to start having these issues out of nowhere and it was not a progressive problem then I would probably turn my attention to the CDI box.

@svcruza

Жыл бұрын

CDI boxes or otherwise known as capacitive discharge ignition, is and can be a culprit that is very difficult to diagnose and can go bad at anytime. Symptoms include lagging power, misfires or backfires, cylinders just dropping out altogether, or a bike having a difficult time starting, not able to have operation at high RPM basically allowing the bike to run in a limp mode. It can also have an extremely rough idle or possibly canceling out one or more cylinders entirely.

Also forgot to say once it sets awhile it will start back up just like normal and can ride again for about 15-30 minutes and it does it again

@svcruza

4 жыл бұрын

Does it sound like its starving for fuel. Does it stumble when idling or when you ride it. Any hesitation?

my buddy is a veteran and his 2013 vulcan 900 wont prime the fuel pump. it turns over wont start. we replaced the kill switch the ignition switch and the relay please help!!!

@svcruza

4 жыл бұрын

Which kill switch did you replace, there are 4 of them. The main kill switch on the throttle handle, the clutch handle kill switch, the neutral gear selector kill switch and last, the kickstand kill switch.

@svcruza

4 жыл бұрын

My culporate on my bike was the clutch handle kill switch because that bike would turn and turn and turn but the fuel pump but never turn on and Prime until I bypass that kill switch and it fired right up.

My bike is hesitant on hard acceleration and I’ve changed everything so I’m thinking it could be the pump struggling on hard acceleration

@svcruza

Жыл бұрын

There's only 3 things I can think of that could cause such a problem. 1. The fuel pressure regulator is faulty. 2. The fuel filter screen on the bottom of the pump is clogged creating restrictions in fuel supply under load. 3. The pump itself is weakened and cant keep up with the demand and is about to fail.

@garyconstant4234

Жыл бұрын

@@svcruza yeah that makes sense to me so I’ll get it on the ramp tomorrow and have a look. They are easy to get at on the viragos. Thanks for getting back to me 👍

What would be the problem if the scooter feels out of gas when I'm on a full throttle? Thanks!

@svcruza

4 жыл бұрын

well it all depends on what kind of bike you have and how the fuel is being delivered to the engine. Does your bike run via carburetor or fuel injection? If carburetor is what you have, check fuel level in the tank, check your fuel petcock and see if its closed or in the correct position, ALSO check your vacuum lines and see if you have a vacuum leak somewhere. Your carburetor jets may have junk in them and could be clogged. Fuel injection is different, check your fuel pump relay, the battery, all kill switches and make sure there is enough fuel in the tank for the pump to cycle. What bike do you have?

@arveedeocareza3152

4 жыл бұрын

@@svcruza Thanks!! I will try to check these things. By the way my motorcycle is gy6 and the fuel tank is on the bottom of foot board and runs with carburetor.

@svcruza

4 жыл бұрын

@@arveedeocareza3152 Ok then I know exactly what you have because the Rowdy 150 SSR in my garage right now(the black scooter next to my sport bike) has a GY6 150cc engine. I too ran into that very problem, so the things I changed were all of the vacuum lines to the fuel system and carburetor, AND you need to check the fuel jets in the carburetor. Give it a good cleaning and that thing will run super smooth. NOTE: when you disassemble the carb, remember how many turns your idle set screw was set at. I will soon create a video covering everything I just mentioned. Let me know how it goes.

I'm here because mine died today so painful.

@svcruza

16 күн бұрын

Yeah I know....it is embarrassing when you are cruising along and it just shuts down like you ran out of gas...lol Hopefully this video helps.😎

When you turn your bike on, are you supposed to hear the whining sound continuously? Or do you hear it for a few seconds and it goes back off?

@svcruza

4 жыл бұрын

You should hear a 3 to 5 second prime then it shuts off. If it's running continuously it will lead to your pump burning up(like mine did). I strongly suggest you check your fuel pump filter and make sure its clean! Otherwise your asking for problems. I have a video showing this result as well.

@svcruza

4 жыл бұрын

kzread.info/dash/bejne/a6xpqLp7lNuqhKw.html

sometimes your pump seems to run fine. but it needs to pump to a certain psi for fuel inj. - Or it won't start. I'd like to know when everyone recommends replacing a pump. It's no fun being stranded along th e road.

If the the stator fried, so the fuel pump will still prime? Cbr 2005 1000rr

@svcruza

4 жыл бұрын

If the stator is fried, the fuel pump will still prime like normal because they are on different circuits. It will turn but not start. You should ohm out the stator to make sure that's the issue. The fuel pump is separate.

@maykosilva7260

4 жыл бұрын

@@svcruza my fuel pump stops priming after I did a jump on a bike , so i did check the stator and its completely fried so i thought that was a problem,, tksssss

@svcruza

4 жыл бұрын

Hey bro if you don't mind keep me posted on your findings because I may be able to help other people with the same issue

Hey quick question. I have a 2008 Hyosung Gt650r, when I pull the gas the throttle lags really bad. Do I need new fuel pump ! ?

@svcruza

3 жыл бұрын

If the engine starts and runs then your pump is working. If I'm not mistaken you have a fuel injection system (not carbureted) so if you are losing power or the power rolls on slower than usual, then I would look at a few things first before changing the pump. First i would put fresh 93 octane gas in it. You may have acquired bad fuel somewhere or water in the tank. (Shit happens to us all lol.) Check all your fluids and make sure they are good. Check the condition of your spark plugs. Those are the easy things. Now for the difficult parts that also have direct effects on throttle power. Check your fuel filter, it may be restricted and not allowing proper fuel flow. Check your fuel pressure regulator, if it's bad it wont allow proper idle, acceleration, causes backfiring,misfiring, and all around irritated to the point you will want to sell the bike.🤣 been there. Check the next video up the list from this one and I'll show you what I mean. I hope this helps. If all else fails switch out to like a Kemso fuel pump like I did or get a new one to be sure. They aren't expensive, just annoying to change.

@lostfiles1158

3 жыл бұрын

SVCruza the bike has 2 carburetors & they both are clean, I did fill up with regular gas so that may be the issue, does it only take 93 octane ? If so I’ll drain fluids & add the right gas, do you have a email address I can send a exact video of what it’s doing that way you can see exactly what I’m talking about

@svcruza

3 жыл бұрын

I have an email address but why not create a short video and post it up on KZread. You never know if someone else may be having the same issues and symptoms looking for a solution.

@svcruza

3 жыл бұрын

Also keep in mind there could be junk or sediments in your fuel lines which can restrict fuel flow in the carbs. Check for vacuum leaks too!

@svcruza

3 жыл бұрын

svcruza18@gmail.com

I'm getting frustrated not knowing what my bike has. It's 2011 gsxr750 I already put it in dealer mode and no codes show up. When I was on the hwy and had it about 50-60mph it suddenly shut off. Now, consider this, I hardly ever use it an turn it on maybe once every 2 weeks. Everything else seems fine. Could it be the fuel pump filter clogged? (I haven't checked the fuel pump yet) but based on the countless videos and yours I came across as the closest thing that could possibly be the problem. TIA for any tips

@svcruza

2 жыл бұрын

Well I tell ya, this is a real head scratcher but what you gave me was great info on what it could be. Its sounds to me like its electrical and not mechanical even though checking the fuel pump filter screen wouldn't hurt. Can you keep starting it now? Or does it just turn and not fire?

@Ruthlessbone

2 жыл бұрын

@@svcruza my bike has NO problem starting and I actually hear the fuel pump prime before starting when I turn on the ignition. My fuses are good and everything. This is where the problem starts, after starting it, I let it idle for a few minutes, I rev it, and around the temp 215f it turns off. I started it and it comes back on like nothing. Another example, was when I go in the hwy and I rev it and push to 80 mph it suddenly died on me again 🤦‍♂️😒. (On a side note, I had recently placed the air filter a few months ago and put a k&n filter but I didn't miss anything replacing everything back how it should be.)

@Ruthlessbone

2 жыл бұрын

@@svcruza could it be the spark plugs? Just a thought...

@svcruza

2 жыл бұрын

That's the first thing I would check is the ignition system and take a second look at your kill switches such as the clutch handle kill switch, or even check your oil pressure sensor because that is tied directly to the computer which shuts off your fuel injectors. Make sure you dont have any corroded or loose connections. It's time to go through that bike with a fine tooth comb. Check the condition of your stator since that is what supplies spark to the coils.

@svcruza

2 жыл бұрын

Also take it out of dealer mode and try to recreate the symptoms.

I need help.. my bike turns on and runs for about 4 mins and it starts dying out and stops.. if i try to start right away it does not start if I try again after about 10 minutes it starts and all looks ok.. and then 4 minutes and dies again..

@svcruza

4 жыл бұрын

What kind of bike do you have?

@terrreptiles3477

4 жыл бұрын

@@svcruza 2002 Honda VT1100

@svcruza

4 жыл бұрын

If I were you, I would look into the oil pressure sensor first, then check your stator. My bike was acting the same way and my main issue turned out to be a bad oil pressure sensor, however a failing stator could also result in engine ignition failure. If the stator windings are getting too hot, they start to create an increase in ohms (or resistance) which will triggers the bikes computer to shut the bike off.

my bike fuel pump buzzes for 2 seconds then stops, is that normal or should it be continuous?

@svcruza

3 жыл бұрын

If it buzzes for a couple seconds just after you turn on the key, it means its priming the engine before starting. Yes that's normal.

@codyglade899

3 жыл бұрын

SVCruza is right, that's normal and that's what you wanna hear, if you don't hear that then your pump is not turning on and is not getting fuel to the engine and therefore the bike will not start

I’ve cleaned my carbs and put in new parts ran fine then spark messed up changed the coils and plugs now the there fuel shooting out the rear carb and the bike shuts down

@svcruza

Жыл бұрын

If there is fuel leaking from a carburetor, it is possible the float is stuck open and not shutting off the fuel flow OR there is something preventing the fuel needle cone from sealing off the fuel flow. Try this...drain the bowl on the rear carb to move the float and do this while the bike is running. Let it run for about 15 seconds then close the drain screw to the float bowl, then see if the leaking continues. If the leaking continues then either the flow level isnt set right or the carburetor gasket didnt seal or is damaged. Try these things and let me know what you find.

@pietime7973

Жыл бұрын

@@svcruza just tried it runs then floods out I’m it’s coming out off the spark plug hole and carb

@pietime7973

Жыл бұрын

@@svcruza I feel like the fuel pump is just pushing to much fuel at once the been a project bike so that pump has sat for about 10years but other than that freshly cleaned carbs with new seals

@svcruza

Жыл бұрын

What kind of bike do you have?

@pietime7973

Жыл бұрын

@@svcruza 1996 Suzuki intruder 800

If relay is good, but pump is not getting electricity and thus not priming?

@svcruza

Жыл бұрын

Dont forget to check the fuse. If fuse and relay are good and no prime is heard, chances are the pump is faulty.

take off fuel filter, turn vehicle on, look to see if line shoots out fuel, this sound about right as a test?

@svcruza

2 жыл бұрын

That is another way to do it but that way get fuel everywhere and risk of a fire. The 3 ways I described are by far the safest and most common ways to check. Of course there are other ways, I ain't gonna lie but this video covers the most common and easiest ways to check.

@Alpacabowl98

2 жыл бұрын

@@svcruza Thanks man, I was able to get the bike started. Appreciate you and this video very much.

You can't test the fuel pump before starting to try all that first? Using a power probe to see if it works.

@svcruza

2 жыл бұрын

A multimeter is a very effective tool IF you understand how it works. You can check the ohms on the pump and compare its resistance to that of a new one that is good. Again, the ways I described in the video are the most common and easiest ways to troubleshoot for anyone.

How about if the fuel pump whined...means it's working? Or can u have the whine but it's still not gonna pump because of the relay..

@svcruza

2 жыл бұрын

If you hear a whine, that means the pump is working. If the relay is working, it will allow the pump to whine. If no whine then no relay.

@Carbonx007

2 жыл бұрын

@@svcruza my bike sat for awhile..it idled horribly..I changed battery and spark plugs..started up fine idled..took it for a mile ride..took it back..the next weekend I took it for a 2mile ride..started idling bad and stalled..it cranks..wants to start but wont..so I'm thinking either plug coils or fuel injectors or an air flow..vacuum hose clogged or something..

@svcruza

2 жыл бұрын

What kind of bike do you have?

@svcruza

2 жыл бұрын

Before you go parts changing, let me toss a few things your way to check first. 1. Empty your fuel tank to check the fuel filter screen at the bottom of the fuel pump. A clogged filter with result in engine misfires, fuel starvation creating a lean fuel mixture, rough idle, and stalling. 2. Fill your tank with premium and half a can of seafoam. Work on cleaning out those injectors. Also take it out on the road and open it up full throttle and ride it like it was designed. 3. Check the air filter and plugs too. If there is anything else I think of, I'll send it your way.

I have an 87' kawasaki vulcan 88 1500cc fuel pump works but when I get to 60mph & up my bike hesitates to climb any higher.

@svcruza

4 жыл бұрын

When was the last time you serviced your carburetor and with a bike that old when was the last time you changed your fuel lines?

@svcruza

4 жыл бұрын

The reason why I asked is that it sounds to me as though you may have a fuel line restriction and if more fuel is demanded at higher RPM or higher speed it's not going to get it because of the fuel restriction which is commonly caused by debris build up in the fuel lines and some deposits left in the carburetor

@dustym.111

4 жыл бұрын

I had my both my carbs torn apart ultra sonic cleaned & new kits put in. Everything lines filters plugs replaced but not fuel pump. Carbs a leaking very little on the bottom bowl which I'm shitty about but other than that my bike has way better power than before.

@dustym.111

4 жыл бұрын

Was just down last year in January.

@svcruza

4 жыл бұрын

Hmmmm 🤔 if your fuel jets are good and fuel lines are clear, and there is no vaccum leak anywhere, I would take a look at the fuel pressure regulator.

Sometimes a pump will run but it’s weak , I’m experiencing that now . Won’t even push fuel to the filter but it runs .

@svcruza

Жыл бұрын

What kind of vehicle do you have?

@jerrypeal653

Жыл бұрын

@@svcruza GL 1500 gold wing, when I said it runs that would be the pump runs . Just to clarify. I noticed the filter had no fuel so took of the line going to it and the pump wouldn’t push fuel out of the line . No obstructions as I could blow back through no problem . Also thought we’ll maybe I didn’t have enough battery but tested it at 260 CCA and it was fine .still waiting on the diamond studded gold plated pump from Honda as there’s a lot of counterfeit parts out there .

@jerrypeal653

Жыл бұрын

@@svcruza update , just installed the new million dollar fuel pump and she fired right up .

Ould poor idle have to do with bad fuel pump even if bikes turns over ? /stays turned over

@svcruza

4 жыл бұрын

Is the bike fuel injection or carbureted?

@luniusbebe32

4 жыл бұрын

SVCruza fuel injection ... it is a 2005 cbr 600rr starts fine idles fine but after a while it will start to jump and sound really weak if i just let sit sounds weaker so i don’t like to ride city much bc of the stops .. but it rides fine feels fine i broke my idle speed cable before i could fix the idle after pulling it from storage from winter so im not sure whats going on sometimes at stops its even idles fine but most tike its crap wasn’t like this before stored

@svcruza

4 жыл бұрын

I would take a look at the fuel pressure regulator first since that's cheaper than a whole new pump. Also take a look at your fuel pump filter.

@luniusbebe32

4 жыл бұрын

SVCruza I will do that soon as i pull my plastics to swap some old bolts out to new ones ... also like i said it does not do all the time bike warms up fine but soon as it does warm up is when the idle starts to jump and if i city ride and come to stops it sounds like it wants to die but if i ride in country and rip it and just riding long with fewer stops its idles fine when i stop the city ride is was makes it idle funny have no clue why

@svcruza

4 жыл бұрын

Do you by chance have a power commander hooked up? I'm trying to think of possible causes for the bikes behavior.

I have cbr f4i... I found my relay but I cannot find a fuse...

@svcruza

2 жыл бұрын

What year model is it? It's a Honda CBR F4i 600 right? Let me look up the location and see if I can help you.

@CbrF4i600cc

2 жыл бұрын

@@svcruza I found the fuse, it wasn't hanging where it should be but that wasn't the issue apparently you need headlight plugged in for the fuel pump to work lol

@svcruza

2 жыл бұрын

No shit!?...that's something new lmao. I guess we learn something new every day. Did you get the bike running?

@CbrF4i600cc

2 жыл бұрын

@@svcruza I will today apparently I did something wrong with fuel line because when fuel pump kicked on gas started pouring out the screw that's bolted to the bottom of tank

@svcruza

2 жыл бұрын

Lmao....isnt it fun owning a motorcycle lol....you should see the new project I'm working on now... something about building a bike is so exciting yet aggravating at the same time...but totally worth the headache in the end when you look back on all you went through knowing you built that.

Is that an orb at 14:22?

@svcruza

4 жыл бұрын

A who-be-whatie?

I don't have much knowledge of electricity, but if there is no resistance, and the multimeter indicates an open circuit, then why is the fuel pump the problem?

@ponjax8190

5 ай бұрын

My bikes fuel pump is not working too, im trying to fix it

@svcruza

5 ай бұрын

Every electric motor has windings inside it. Windings are the electrical conductor in the motor between the housing and the rotor. So test for a short to ground in the circuit or and open short in the windings. Remember it's one continuous wire wrapped hundreds of times and if the power can pass through them, they will create resistance or ohms, aka closed loop. If there is a break in that wire anywhere, then the resistance stops and now the signal is broken or OL for "open loop". On a properly working electric motor you want resistance.

@svcruza

5 ай бұрын

Now if you are checking the fuel pump relay then yes, with the system turned off and no power, the relay should read OL or open loop. When you turn the key on, then the system is energized and it closes that relay to provide power to your pump. Key on=closed relay, Key off= open relay.

@svcruza

5 ай бұрын

@@ponjax8190 dont forget check your relay....they have a tendency to get stuck due to carbon buildup on the contacts inside. If you can tap it on the top hard enough (like your knocking on someone's door) it should free up the relay and start working again. If that fixes the no start issue, it's time to replace the relay.

bro, i got a 95 zx9r, i changed the fairings, removed the fuel tank in the process, was getting it painted. now when i put it all back together im now bogging down at 1-4rpm. bike idles, when running, through gears she bogs down. no pick up at all. any tips need help pls

@svcruza

3 жыл бұрын

You'd be surprised how many times I hear about this issue and your situation. From my personal experience, when you removed the gas tank, you moved the fuel lines and shifted around some old sediments in the bottom of your tank which broke off and flowed right into the main jets of your carburetors. My suggestion, drain and scrub out the bottom of your tank, (no shortcuts), clean your fuel petcock (if you have one. Replace ALL fuel lines (because the old ones have sediments crusted to the inner walls), and clean all carburetors and make sure they are syntheticed when you reassemble the bike. After that your bike should run better than before. When you rebuild your carburetors, write down the number of turns for each set screw or idle adjustment screws because that is super important. I hope this helps dude.

@mikewhitaker5416

3 жыл бұрын

Its the air inlets that run through the fairing for carbs

Hi, thank you for your video. My bike is making me crazy. Husqvarna 701 2016 Supermoto. It's on 28.000km and fuel filter was never changed. Its losing power here and there, stalling, when I downshift in 2nd makes popping noises. Should I change whole fuel pump and filter set or just fuel filter.. I don't know what to do next, I'm trying not to spend unnecessary money. Thank you so much Greetings from Croatia

Guys i have cbr600rr 2012 When i pass 180km on it's struggling and there's som sound comes from the exhaust like pop

@svcruza

4 жыл бұрын

When was the last time you checked your spark plugs?

@r0ver466

4 жыл бұрын

@@svcruzabefore 8k km

@svcruza

4 жыл бұрын

Ok. There's only 2 things I'd look into at this point. The ignition coils and fuel pressure regulator.

@r0ver466

4 жыл бұрын

@@svcruza so it's from the spark plugs?

@svcruza

4 жыл бұрын

That's correct.

I’m surprised your bike wasn’t running funny before it crapped out. My Cbr600rr won’t go over 11k rpms but it still runs. But it’s definitely my pump it’s trash smh

I ordered a quantum fuel pump & will install when I get back from the road original price fuel pump for my bike is $300 like fuck that. Will see how this goes if not I'll have to get the original one. I dont think my fuel pump now was putting out the fuel my bike wanted at them speeds. 4 speed motorcycle is fun as heck

@gabrielgalaxygh

3 жыл бұрын

How did it work out??

@dustym.111

3 жыл бұрын

Wouldn't buy another one, I have to buy the original pump, the after market fuel pumps are 💩💩💩💩💩💩 only last after my second ride which wasn't that far

@gabrielgalaxygh

3 жыл бұрын

@@dustym.111 damn, I bought a bike with one of these but it's still bogging out so I'm wondering if it's the pump or something else

@dustym.111

3 жыл бұрын

If its bogging out then its the pump. The original fuel pump that was on my bike, I dont know if its been replaced before my bike is a 86' I believe kawasaki vulcan 1500 . I know that pump was going bad, when I put after market fuel pump on my bike actually ran good on the highway then acted up . Those things don't hold up. If you watch motorcycle MD the young guy which works on Honda bikes only but he will tell you that he has a 5 gallon bucket of after market fuel pumps that people put on they're bikes. He said its just better to stay with original. Yes its cheaper but your better off getting the right one that will last a lot longer .

@dustym.111

3 жыл бұрын

Another thing is that I have to get carburetor work done again with someone new. I had mine taken apart, get cleaned really good then had new parts put on from over seas. Couple weeks later I looked down randomly and seen fuel dripping just barely from my right side carb bowl. The guy said it was probably a vent thing. Idk. Never took it back to him. That guy races his bike on track, said that by time he was done with my bike that it would be wicked fast. Wished that was somewhat true lol. I found another guy that works on older bikes just like mine so hopefully I can get it going by spring.

I think I am having a fuel pump problem but I'm not sure. I just uploaded a video, if you could take a look I would appreciate it.

@svcruza

4 жыл бұрын

Hey dude I watched your video and it sounds like it's starving for fuel so perhaps you should check your fuel pressure regulator first and see what condition is in

@svcruza

4 жыл бұрын

Can you make a longer version where you turn it on, then start it and let it run? I'll do whatever I can point you in the right direction.

@blankblank2510

4 жыл бұрын

@@svcruza I sure can, and will do tomorrow. Thank you for the help.

@blankblank2510

4 жыл бұрын

2 more videos are up the f1 light was on because of the throttle sensor was a little off. I fixed the sensor directly after the video. Bile ran the same.

@svcruza

4 жыл бұрын

Oh you have an FI light (equivalent to a check engine light). That comes on because you have a problem with your Fuel Injection (FI). What I did was purchase a dealer mode switch that would show codes on the odometer digital readout similar function to a code checker for a check engine light on your car. If your bike is starting then it is getting fuel but not able to keep the fuel pressure to continue to run, which is where my finger points to a bad fuel pressure regulator.

Got an 08 Gsxr 1k and it clicks quickly like 3-4 times. Is that normal?

@svcruza

4 жыл бұрын

What are you trying to do and how does it act. I'll do what I can to help.

@jamesoaks866

4 жыл бұрын

SVCruza thank you, but it does exactly what I wrote before once the prime fuel is priming. It clicks 3-4 times while priming.

@svcruza

4 жыл бұрын

Hmmmm can you pinpoint where the clicking is coming from? The only click you should hear would be the starter relay, the fuel pump relay and perhaps even the starter itself.

@jamesoaks866

4 жыл бұрын

SVCruza from the tank

@svcruza

4 жыл бұрын

Then no sir, that sound is not normal. Its supposed to whine for about 3 seconds then shut off.