3.5 Inch VS 3 Inch Hinderer XM-18, Two Different Knives!
Жүктеу.....
Пікірлер: 31
@Novaargh3 жыл бұрын
i have 3.5" XM's up the wazoo.. Only one 3" and i carry that little one since 2012 every day. hardly carry the 3.5" I really need a couple more 3" because that it the perfect knife period.
@JackedLobster7 жыл бұрын
This is a really helpful video. The size comparisons, specifically, were really helpful to me. The CRK, Benchmade and Spyderco comparisons gave me a perfect idea of what to expect. I was looking for a SnG/SMF comparison, but I totally get the idea from this video. Thanks!
@JackedLobster
7 жыл бұрын
Spoke too soon. The SnG came out.
@highonknives34067 жыл бұрын
He's still alive! haha, good to see you back on the tube. Miss those vids!
@stoutdog565 жыл бұрын
I appreciate you making this video. It is surprising the difference between the 3 and 3.5. When I initially looked at them both side by side, I thought the 3.5 was an XM24. I have a couple 3 inch Skinny's and am thinking about getting a 3.5 Non-flipper.
@tyt2lynnin17 жыл бұрын
the price range is almost the same, really hard to justify the 3 over the 3.5
@jpbernie725 жыл бұрын
Or if you’re like me you are off put by the gigantic knives Hinderer makes and like the 3 inch version.
@MANversusGRAVITY4 жыл бұрын
Completely agree, two very different knives. I prefer the 3.5 as it feels like an absolute tank but also carries well. It is the perfect size for me. To me, the 3 inch is fine but just feels small and unsubstantial in hand.
@rekozma7 жыл бұрын
man I really like that brown digy-cam. never liked the regular digy-cam before but that looks nice. is that one for sale or is it gone already.
@nicmartinez59667 жыл бұрын
Your missing a skinner xm-18 in the mix. I own one and I love it. 3.5 is my preferred.
@nabilnasir96697 жыл бұрын
Wicked edge man
@celebration076 жыл бұрын
Nice
@knowyourhistory7 жыл бұрын
Hinderer finally released some non-flipper XM-18s! Saw them on Knifecenter but they are all slicer grind so I'm hoping for a spanto one.
@cutlerynovice93057 жыл бұрын
Randy don't know if you herd, Hinderer is now coming out with a 3 inch slip joint knife, it looks like a thinner xm-18 3 inch non flipper
@bsmith11037 жыл бұрын
Would scoop one up if they didn't have Teflon washers. Good job with the video!
@isaacparker88013 жыл бұрын
Sebenza take the crown
@SoccerSchooler6 жыл бұрын
what angle did you sharpen the xm-18 3'' with the glow-in-the-dark g10? the bevel on that is so wide and mirrored, i might do the same on my WE @Randy Johnson
@wolf53917 жыл бұрын
Love the xm 3". But i cant find a bowie bladed 3" non flipper. Do they exist? Hate the spanto and slicer grind
@Joker-yb6ks2 жыл бұрын
I every day carry hinderer xm-18 3 and zero tolerance 0450.easy carry,
@calebgreen41507 жыл бұрын
I got to go to monkey edge in Phoenix and handle the 3.5 In Bowie. I think if I ever bought one it would be that one.
@christophersmith49664 жыл бұрын
Do have any hinderer scales I would love to here from you I have a 3.5 xm18. I am looking for titanium scales and some other colored hardware
@sid72367 жыл бұрын
Im looking to pick up a 3" version, does anyone know where I can find one?
@randallkelley35997 жыл бұрын
I have put away my 31/2"'s and now just carry my 2- 3"rs...lighter, easier to flip, and to carry.
@Dmhlcmb Жыл бұрын
I edc a 3”. I want a 3.5 skinny.
@refinededge3997 жыл бұрын
What did you mean, "if anybody is interested? " Are you taking on new orders again?
@19Bearsfansince794 жыл бұрын
Spyderco doesn't hold a candle when it comes to durability versus Hinderer..... end of story
@adanma177 жыл бұрын
Where are the xm- 24's?
@paulrobert32844 жыл бұрын
Oh man, that jade g10 3” is so sexy. 😍
@Novaargh
3 жыл бұрын
That's translucent green, Jade is a much darker shade of green.
@BigThumpr17 жыл бұрын
Besides the handle length, blade length and thickness they are the same. Same handle scale design, same hardware, same crappy Teflon washers. For the price of these cookie cutter knives, you can get into a lot better of a knife. Sorry but he has not really come out with anything astonishing for what you pay for them. All Hinderer does is put different blades in the same handle scales. Very similar to what ADV does. These things had nothing but problems with the detents as well.
Пікірлер: 31
i have 3.5" XM's up the wazoo.. Only one 3" and i carry that little one since 2012 every day. hardly carry the 3.5" I really need a couple more 3" because that it the perfect knife period.
This is a really helpful video. The size comparisons, specifically, were really helpful to me. The CRK, Benchmade and Spyderco comparisons gave me a perfect idea of what to expect. I was looking for a SnG/SMF comparison, but I totally get the idea from this video. Thanks!
@JackedLobster
7 жыл бұрын
Spoke too soon. The SnG came out.
He's still alive! haha, good to see you back on the tube. Miss those vids!
I appreciate you making this video. It is surprising the difference between the 3 and 3.5. When I initially looked at them both side by side, I thought the 3.5 was an XM24. I have a couple 3 inch Skinny's and am thinking about getting a 3.5 Non-flipper.
the price range is almost the same, really hard to justify the 3 over the 3.5
Or if you’re like me you are off put by the gigantic knives Hinderer makes and like the 3 inch version.
Completely agree, two very different knives. I prefer the 3.5 as it feels like an absolute tank but also carries well. It is the perfect size for me. To me, the 3 inch is fine but just feels small and unsubstantial in hand.
man I really like that brown digy-cam. never liked the regular digy-cam before but that looks nice. is that one for sale or is it gone already.
Your missing a skinner xm-18 in the mix. I own one and I love it. 3.5 is my preferred.
Wicked edge man
Nice
Hinderer finally released some non-flipper XM-18s! Saw them on Knifecenter but they are all slicer grind so I'm hoping for a spanto one.
Randy don't know if you herd, Hinderer is now coming out with a 3 inch slip joint knife, it looks like a thinner xm-18 3 inch non flipper
Would scoop one up if they didn't have Teflon washers. Good job with the video!
Sebenza take the crown
what angle did you sharpen the xm-18 3'' with the glow-in-the-dark g10? the bevel on that is so wide and mirrored, i might do the same on my WE @Randy Johnson
Love the xm 3". But i cant find a bowie bladed 3" non flipper. Do they exist? Hate the spanto and slicer grind
I every day carry hinderer xm-18 3 and zero tolerance 0450.easy carry,
I got to go to monkey edge in Phoenix and handle the 3.5 In Bowie. I think if I ever bought one it would be that one.
Do have any hinderer scales I would love to here from you I have a 3.5 xm18. I am looking for titanium scales and some other colored hardware
Im looking to pick up a 3" version, does anyone know where I can find one?
I have put away my 31/2"'s and now just carry my 2- 3"rs...lighter, easier to flip, and to carry.
I edc a 3”. I want a 3.5 skinny.
What did you mean, "if anybody is interested? " Are you taking on new orders again?
Spyderco doesn't hold a candle when it comes to durability versus Hinderer..... end of story
Where are the xm- 24's?
Oh man, that jade g10 3” is so sexy. 😍
@Novaargh
3 жыл бұрын
That's translucent green, Jade is a much darker shade of green.
Besides the handle length, blade length and thickness they are the same. Same handle scale design, same hardware, same crappy Teflon washers. For the price of these cookie cutter knives, you can get into a lot better of a knife. Sorry but he has not really come out with anything astonishing for what you pay for them. All Hinderer does is put different blades in the same handle scales. Very similar to what ADV does. These things had nothing but problems with the detents as well.