Nobody have a heart attack lol I’ll change the thumb nail 🤣

@KRIL89

Жыл бұрын

I mean you still called it a FG the entire video haha

@unicorndreamers9571

Жыл бұрын

Come on fellas. He’s human. It’s not the end of the world.

@RjctdEK

Жыл бұрын

You mean after your done painting your nails 💅

@WelshyAutomotive

Жыл бұрын

lmaooo not the end of the world g

@rogerparsons4595

10 ай бұрын

Did you guys use a k20 head or?

I own this car and love it! More 8th gen civic content please.... Love to see u guys covering it!

@jmoookie873

6 ай бұрын

So how many victims ever since the build don’t lie 😂😂 🤔

@ryangisabum5576

5 ай бұрын

No rec what’s the 0-60 looking like on your wonderful build I fw it jevi bro

This is my favorite car of all time. I have the whole OEM Mugen body kit and seats. My FA5 was rear ended and destroyed before I got to built it…. Waiting for the right time to pick up another one and build a Mugen.

Buckle up and enjoy the ride of a lifetime. Here's to hoping the owner of this incredible build has endless fun and unforgettable experiences with their upgraded machine!

FA>FG. Nice street build.

Yessirr amazing people, you got Sonic, Jroc, Ahmed and my son Jaime

Sheesh !!! Couldn’t wait for another drop

More FA5 budget content pls

Fa5=sedan fg2=coupe

good power love it

I didn’t see torque numbers on the screen? Id be interested to know what the torque graph looks like.

Finally a new video.

Jroc for president 🙌

this is a FA not an FG

@deliverymandan

Жыл бұрын

Thank you!🙌😂

@youtubejunkie8053

Жыл бұрын

I say 1 push-up for every time he said FG 😂

@GooGz

Жыл бұрын

Thankyou mans was out here disrespecting Fa5s

@logee2978

Жыл бұрын

I think he said fd which is the same I think

Sonic of course always to late for any work his dad jroc does all the business 💪

Stop slacking sonic203 get it all on camera son! 😂👍🏼

I’ve been told that a stock block k24 doesn’t have enough compression for DC 3.2. Great work!

@IsaacPoopsAlot

6 ай бұрын

yeah the most it'll do are the 2.2s

@benjbsn2429

2 ай бұрын

yup its slightly overcammed, with 12.5:1CR this setup should be right at 275+WHP

didnt watch the FG video but what this rev to? 🌭🐐🌭🐐🌭🐐🌭🐐

Deech works. Like going to the BEACH but with a D. DEACH works

Clean Fg i have one just like it but mine is a FA5 😂 I believe FG2 is the coupe but clean build have same setup with k24/k20 i hope to make 260-270ish

What fuel system companies do you guys normally use?

Love the work. You guys should do my FB6. I have a 4Piston ported R40 and Stage 3 Cams. There isn't anybody that has built one to my knowledge.

@pinkstars2185

8 ай бұрын

What are you looking at for power on that setup?

@SofaKingNYce

8 ай бұрын

With 12.5 compression? Mmm hopefully 270 hp

@aaronramirez9147

6 ай бұрын

OH COOL.... 4 PISTON!....YOU AND THESE GUYS CANT EVEN SAY WHATS WHAT

almost same setup got 253 but with drag cartel dic

YOOOOO. Can you please do more FA5 content ?

How much torque and what fuel? My other question was answered about the redline in the comments.

excellent video guys! Can you share how much this cost? Thanks

Have yall ever done a 0 to 60 mph run? And if so how fast was it

Are lean mounts possible with the si shell??

Yo Everybody give it up for that fan thing was moving some air lol😂😂

Does this skunk2 header fit the 8th gen with a k24 without the washer method? People say the new skunk2 fits

"Get it all on camera"

i wonder if there's a way to buy a civic fa5 si front grille.

What header you running ?

Whats your shop info? I'm dying to put a TSX engine in my 7th gen accord. Def. Can't do it myself.

Yoo i was wondering what the bumper is called on this civic ! Any ideas what’s it called ?

E85 or 93?

What was the build cost with the labor? And trust me I know quality craftsmanship goes a long way and you guys did a hell of job on that motor. In your previous vid, you said to get an automatic motor, just wondering why that is?

I would also help JRoc all day on yals shit bro haha

I just the video how you guys pick the winner with Random Generator, how do you account for X2 multipliers in a random 1-10 generator? Its like i do 4 ordes each with X2 multiplier. With random generator its accounting 4 orders, not X2 making it 8 order. I only got 1 order number for x2 multiplier. Your random generator its only accounting for each order, not X2 of each order. If your Number generator 1-10. How would you account for #4 popping up 20 times cause of X2? If you put the generator from 1-10 its not accounting for X2 multipliers. Am i wrong?

🐐 🌭🌭🌭🌭🌭🐐

That on E85?

Wonder how much extra, it would make with a proper intake manifold. Definitely get more than 260 hp.

@d0mochi

Ай бұрын

It would easily hit 300 whp with those cams if they rocked a ported head even on the stock piston and rods from the k24

What wheels are those??

Was it just me or is that top end noisy? Or is it just a k thing? Swapping a k24a into my 8th gen si coupe as we speak.

How much for tunin I have h23

What if you do the 24 head on the 20 black you still need those spacers

@lssi9073

8 күн бұрын

No, the block is what is taller not the head.

Is the grams dbw tb 72mm better than a ktuned 72mm dbw tb? Have them both but using now is the ktuned

@isk8inkeswick

Жыл бұрын

No difference in blade size so one will not make more than the other

What's going on witht the eci6 give away haven't heard anything about it who's the winner

Can you please tell me ware you guy’s are located I live in Chicopee

Doych works

How much would it make w/ a z3 head built head on the 24a2 block?

@isk8inkeswick

Жыл бұрын

I’d say another 5 or so as the z3 head flows a bit better on the bench. But you can port a 24 head to out perform a stock k20 head

Would a Z3 need more than the head work (cams/valve train) to reach 250?

@istanleyii

Жыл бұрын

it’ll reach with just built head. but the torque won’t just be there like the 24 bottom end

@isk8inkeswick

Жыл бұрын

I don’t think a stock z3 bottom end will make 250 with head package maybe 235 pump gas

@Fa5Squad

Жыл бұрын

They can make 250 with a ported head, 50 degrees of timing, and e85 . But youll need full bolt ons,injectors, and a fuel pump too. My z3 made 220whp with j37 tb, mishi intake, n1 3” exhaust, and the stock header. My tuner said itll do 230 with a header. It has a s2 mani and k tuned rail now so with a header itll make 230 easy. I want to upgrade my fuel pump before then tho. Lol

@Lastsight100

Жыл бұрын

@@Fa5Squad oh ok. I have 72mm TB, ported RBC, RDX injectors, 3inch exhaust, 335 fuel pump, header and a intake. Pretty much full bolt-ons.

@Fa5Squad

Жыл бұрын

@@Lastsight100 u could make around 240whp with those mods. Need a dyno tune though. And they run hotter with a lot of timing so just a thought and change your oil more often.

Sonic 203 can I get a build list for 300 hp for a k24a in an RSX plz

@jerso79d

2 ай бұрын

Just realized I liked my own comment

@d0mochi

Ай бұрын

Basically this same build with bigger than rdx injectors and a ported head will easily hit 300 whp on pump fuel or minimal ethanol to not tax the injectors too much

What do you have redline tuned at?

@sonic_203

Жыл бұрын

i wanna say 8700

6 grand on not the top of the line parts is good for 255hp. So if you was to buy the best components money can buy. How much would that take to build? $

fg is the coupe bro

Can you help us k20a3 rsx base community that really are on a budget make our cars faster with wat we got. Is it posible? i dont want to buy a new motor for swap lol. Just use what i got.

@isk8inkeswick

Жыл бұрын

Not without tearing it down to the block and building from scratch. That motor in stock form with never make power

@joemcmeans7413

Жыл бұрын

If you don't care about idle or bottom end you can swap the rockers and swap the cams. Look up vtec killer setup here on KZread with any of the economy engines. K20a3/k24a4/1, etc. Essentially you run in vtec all the time using the big lobe on a true three lobe VTEC cam. You can still make over 200whp, but like I said, with only a big lobe your bottom end will suffer, and you are still down on compression. A lot of guys still seem to like it though. You will still need to do your bolt-ons and obviously need to get it tuned. But you could do it for pretty cheap, comparative to doing an engine swap at least. Hope this helps.

Maybe I missed it but was it a stock head? Or a k20 head?

@Biggusdikusincontinentabuttoks

4 ай бұрын

Stock head. Just with springs retainers and bigger injectors

@67greengt

4 ай бұрын

@@Biggusdikusincontinentabuttoks cool I’m lm looking at doing a similar build that makes it simple

what size injectors were they?

@danedutoit4902

Жыл бұрын

rdx 410cc

@my93foxmustang1

Жыл бұрын

@@danedutoit4902 ok. thanks bro

State the torque numbers

K20 o k24

How did all of yous get it wrong?! lol I know it’s been corrected but damn it’s so cringy listening to FG the entire video. Anyway the FA5 is my all time favorite civic. Unfortunately I sold mine in ‘19 and regretting it. I want another one to swap a k24 with a kraftwerks kit

🤣

Pronounced 'Deesh'. 🤙

FA5

Just bought a Fa5 smh k20/k24a2 😂

All that money and could have just slapped a turbo on it and been done lol

Fg is the coupe...FA5 is the sedan

Fa5!!!!!! Not a Fg 😂😂😂 come on ya Honda boys right?

@sonic_203

Жыл бұрын

lmao no im not

2.4 bunk we all know 2.0 is best

@Itsjustanelantra

Жыл бұрын

Just put the k20 head on it

@KRIL89

Жыл бұрын

A square motor for the street is pretty damn fun.

Call Adam and ask how to pronounce Douche Works

Talkin bout a coupe the whole video lol 🙈🙈

That's a FA5 Not a FG, FG are the coups

“Budget build” lmao $1900 cam package

6k for 260hp... 😂 Somebody getting robbed.

This an fa5 my boys not fg2

So you telling me $6k to gain only 58hp is a budget build? That si comes with 197hp from factory. You could’ve thrown a supercharger kit on it for less and gained way more hp.

@ninja_slothsracer

Жыл бұрын

u gotta give the customers the 🌭🐐sauce

@isk8inkeswick

Жыл бұрын

That’s 197 to the crank on a brochure. From factory to the wheels I thinks it like 150whp or something. That’s bolting in over 100whp NA.

@imBriz

10 ай бұрын

more like 100hp lol

@pinkstars2185

8 ай бұрын

Some people like na power, not all about the boost. Plus 255 is a better starting point before boost then 197 before boost

6k for 260hp k series no thanks lol

@Itsjustanelantra

Жыл бұрын

I've seen people using the stock 06-08 tsx k24a2 block with the stock k20z3 head or the stock jdm k24a block with the k20z3 head on it do 250+whp using a type s oil pump and upgraded injectors with all the other bolt ons without doing any valve train upgrade and polishing or porting and using the stock cams in the k20z3 would be more of a budget build

@yeahman1756

Жыл бұрын

@@Itsjustanelantra springs and retainers, oem k series stuff.. can get you 260hp. easily. K series platform is easier to make Hp than b series reliably, besides k series glass transmission is where it is expensive

@Lastsight100

Жыл бұрын

@@yeahman1756 at what HP range does the trans become problematic? I've only every had around 235hp in my swaps. I do plan to get to around 250hp for a street car.

@yeahman1756

Жыл бұрын

@@Lastsight100 even at stock hp it'll go out if you bang on it a lot. I suggest you upgrade your gears to something beefier in the aftermarket world, or have some spare oem laying around as back up.

@stevardm2694

Жыл бұрын

@@Itsjustanelantra 250+ on pump gas ?

Moist

fa not no damn fg jesus christ

MAAAAN, THIS PUG DOG IS TALKING BIG THEN SAYS HOW MULTIPLE THINGS ARE HAVING ISSUES....SINCE THE FIRST RUN, IT WAS TRASH.