I didn't go too in depth with this one for the sake of time and trying to keep the video as short as possible. Be sure to leave any questions you guys still have down below! The 24 Valve is ALIVE again!!! Hope you all have a great night with family and friends!

Larry B’s Cummins starter rebuild kit is top quality. 250k on my stock starter just now having issues. Going to rebuild mine today complete not just contacts.

Good job on rebuilding the starter. A lot more cost effective way to do it i spent 60 cents for the copper connections and been going great. Thanks . Keep up the good work.

I literally just went through this last week. I swear our time line of repairs/upgrades has been almost spot on since you started this channel. Keep it up and merry Christmas!

@purepanorama8484

5 жыл бұрын

Haha, I've been pushing this off for a long time and it finally took a dump 9n me. Truck fires up like new now! I should have got this done weeks ago.

Shocked at your quality man. U 24v guys remind me of Russell crows character in 'A beautiful mind'. Meanwhile us banjo pickin, buck toothed, 12v guys are way better at datin our sisters than we are at bein able to read good so a high quality video like this is a real life saver.

Good stuff man! Used it step by step and it saved my starter. Removal was the worst part

If you ever have to replace your starter or alternator my advice is go with Wilson. When it comes to construction and ag equipment they’re the most dependable brand you can get. I’ve been using them for years on my truck and all the heavy equipment shops I know only use Wilson electronics.

@purepanorama8484

5 жыл бұрын

Awesome! I'll check them out when I get home. Thank you for that!

Good work. I'm probably going to be doing the same thing shortly. Gotta love Geno's. Merry Christmas to you also!

@purepanorama8484

5 жыл бұрын

Genos has everything we need! Merry Christmas!

great video, it was the starter, now a trusty start. Merry Christmas

So i replaced my solenoid contacts and plunger and I took apart the motor side and it was clean. The copper was slightly discolored but not much. The starter spins over outside the truck but not while mounted to the engine. I by passed everything by using a power probe to run the starter and still just clicks while mounted to the truck but no spinning over. Outside the truck it will spin like mad

Good job on the starter the brushes looked like they will last a good while longer you are always better to keep original parts and rebuild if possible keep up with the good content and HAPPY HOLIDAYS

@purepanorama8484

5 жыл бұрын

They seem to be working just fine. Truck is firing up like new with no hesitation at all. I think they will be all good for a while!

Drill the heads off the 3 screws then pull the cover off take a pair of vice-grips and pull the studs out and replace with new ones.

You probably won't believe it but I thought my starter was dead at 474k miles (the original one) would crank real slow after getting to operating temp after I shut it off. so I tore it apart just like you and cleaned it all up before buying a new one... it works yet again. honestly looked just about as bad as yours. there was zero grease left in the gear housing but it really did come back to life with a serious deep cleaning and brushes/ contacts. really wonder how long it will last

Did you take a amp draw before the rebuild and after to see if the rebuild actually helped ?

Hopefully this rebuilt fixes tht random slow crank you had

the signal wire stud to the solenoid how does that attach internally? the nut is seized onto mine and putting a wrench on it and vicegrips on the stud snapped the stud off flush with the nut, spun the stud and ripped whatever wire is on it inside off so now it doesnt engage the solenoid

Don’t use brake clean use electrical cleaner like QD contact cleaner. Brake clean the outside not the inside. 85% of the time it’s contacts and plunger not rotor.

Great video man ! I was at work or ida been first lol 😂

@purepanorama8484

5 жыл бұрын

You got the next upload!

@thatpowerstrokebloke

5 жыл бұрын

@@purepanorama8484 lol 😂

@koioo2

5 жыл бұрын

@@purepanorama8484 if it is working leave it but next time you have problems there is a brand new starter in your Clossat

Hi, just now seen Video. Can the solenoid terminals be reversed to ease removal of battery cable when removing/ replacing starter?

I’m still trying to find an OEM starter to rebuild. My 01 is on its third oreilleys starter. Such a pain in the butt. Quality video! Keep it up! On a different note did you put a fuel heater on your fass?

@purepanorama8484

5 жыл бұрын

I have not done a fuel heater but I want to look into that. Stay tuned for that one!

@keithwolfington7013

5 жыл бұрын

pure panoRAMa there are 2 ports for electrical and one for coolant so it doesn’t gel while you are driving. FASS has a video about it. I think there are some pretty awesome options for what you can do to make cold starts effortless. Including a coolant heater. Also something to look into if you have the money.

@purepanorama8484

5 жыл бұрын

@@keithwolfington7013 I'll jump on the fass page when I get home and watch their video. I do need something to heat fuel since I did away with my stock fuel heater when I did the 12 valve style fuel filter head

@keithwolfington7013

5 жыл бұрын

pure panoRAMa I found the video on KZread. They have a few different ones. It’s pretty nifty to see the different options they have. The kit is $151 from most places I’ve found. If you want to run two electric heaters you need two kits. I have read that the coolant option is significantly cheaper. But that wouldn’t help on start up. They do suggest using a switch on I believe one of the heaters. Best of luck!

I have a 1995 12 valve, 332k on it.. cranked slow but started everytime. Now it wont crank or click... Is it savable

I wish ChrisFix owned a cummins, his repair videos would be straight to the point and none of this extra blah blah bullshit

how much did ur diesel auto power injectors cost?

@purepanorama8484

5 жыл бұрын

I want to say they're around 400 bucks. I dont remember off the top of my head. I'll look when I get home.

You and that cap, look like the walking dead. Lol

@purepanorama8484

5 жыл бұрын

Lmao! It's cold up here rolling around u der the truck in the driveway! Had to bust out the hat with the face mask attached to it.

I fail to understand WHY the majority of people pronounce Cummins as Cummmings.

@purepanorama8484

4 жыл бұрын

I fail to understand who you're talking about? Have you had your hearing or vision checked lately? You clearly aren't hearing well or able to read any of my video titles?🤷‍♂️🤔