Everybody in the comments section of KZread is a professional welder... Funny how none of them have their own vids showing how it's done. Too busy talking shit, I guess. 😂😂😂
@linkmarine
6 жыл бұрын
that's right!
@liogonzalez8813
6 жыл бұрын
😂😂😂😂😂
@Bodgemiester
5 жыл бұрын
Bout right
@awkwardsilence3375
5 жыл бұрын
I was about to post a comment on "where did you learn to weld" but...
@cerna344
4 жыл бұрын
I belive this is actually a good vid. I never consider on cutting the corners and then bend the sides for a better shape. Thanks!
@vaughn11115 жыл бұрын
Nice to see there are still people who know how to arc weld :) Great video, thanks !
@jodyshaw90438 жыл бұрын
You are hell with that grinder son! Must all that i have watched was cut with plasma cutter! bumper looks great!
@MrHunting995 жыл бұрын
Old school done with a stick welder. Very nice.
@billoxley53155 жыл бұрын
Nice work young man,I built one about 15 yrs.ago.used a chunk of 10×10×1/4 sq. Tube similar to yours.tucked a winch inside.extremely strong.A bit heavy! I started welding back in 77.
@alvinomelgoza28876 жыл бұрын
Great music!!!! Thanks for sharing!
@Crawlerer798 жыл бұрын
Great job!
@killianpache14875 жыл бұрын
Pas mal les soudures, dommage qu'il n'y aie pas plus de vidéos comme celle-ci sur youtube.
@vnzl85667 жыл бұрын
Great video Good job .
@Reaper43676 жыл бұрын
Nicely done mate. Great light protectors. Cheers for sharing.
@BaptistePitois
6 жыл бұрын
Thank you !
@joracer15 жыл бұрын
V good job.... helpful hint if you brace your welding hand against something while welding your welds will be grade even better..
@KevinxDoll7 жыл бұрын
thats badass
@xpitois8 жыл бұрын
Nice camera work, nice editing, nice bumper, nice disco. This is perfect ! Thanks for sharing with us !!! Can't wait to see how it performs now :) :) :) :) :)
@BaptistePitois
8 жыл бұрын
+Xavier P Stay tuned ! Coming soon ! ;)
@Elkmonger4 жыл бұрын
Hell YEA! Finally some studs stick welding. No welders in this video were triggered.
@ricllinares59295 жыл бұрын
Nice job 👍
@lanceroark63865 жыл бұрын
Romanian Tony Stark hard at work!
@jsmith62596 жыл бұрын
bIG ups BRO......good job!!!
@yourmammasaid20717 жыл бұрын
great video!! I love that music
@ramlover6496 жыл бұрын
Nice work
@FPTekkit8 жыл бұрын
proper nice job with that, i bet you are well chuffed. Excellent job. Great bumper, great video, great work.
@BaptistePitois
8 жыл бұрын
+Fraser Gordon Thank you Fraser.
@justinheras9317 Жыл бұрын
Mig would have been better for the application but good job doing what you could with what you had. Bravo 👏
@linkmarine6 жыл бұрын
Great Job!
@BaptistePitois
6 жыл бұрын
Thanks Matt 😀
@fotostudio686 жыл бұрын
Great work, Baptista! Your custom bumper looks cool! I'm bad welder )))
@BaptistePitois
6 жыл бұрын
prosvadba.pro I'm not a good welder too, but I can weld haha
@fotostudio68
6 жыл бұрын
Transsmission great work!
@joekirklin8 жыл бұрын
Great to watch the process! Thanks for sharing these videos. Such great fun to see these trucks being used for what they are bred for! Jealous that the TD5 was not sold in the USA, however :/. Subscribed!
@BaptistePitois
8 жыл бұрын
+Joe Thanks Joe !!
@curtis24-76 жыл бұрын
Great video! Ignore the negative bullshitters! I'm subbed!
@BaptistePitois
6 жыл бұрын
Thank you Tom ! I'm always looking to improve my work so I like having "negative" comments, but true is I prefer having explanations too 😊
@rudinain0629 Жыл бұрын
Good job
@gazzlerolo88377 жыл бұрын
What size box section did u use bud nice build thinking of having ago my self got a d1 so ideal
@gusshernandez61847 жыл бұрын
that's great
@kenhomeier86296 жыл бұрын
Good job. Wouldn't listen to stupid comments. Not everyone can build something cool with minimal tools and equipment.
@BaptistePitois
6 жыл бұрын
Many thanks Ken!
@djwood51208 жыл бұрын
Beautiful video
@BaptistePitois
7 жыл бұрын
Thanks :)
@DarkiiDen8 жыл бұрын
très beau travail !!! :D
@BaptistePitois
8 жыл бұрын
+DarkiiDen Merci beaucoup !
@DarkiiDen
8 жыл бұрын
+Transsmission ca c'est le genre de truc que j'aimerais faire quand je serais en possession d'un 4x4 :D mais c'est pas pour tout de suite x)
@marionunes96792 жыл бұрын
amazing
@CougarHouseGarage8 жыл бұрын
Your videos are always so engaging :), The topics for your clips are on point :), This vid of yours had me glued to the screen:), What camera do you use to shoot your episodes?, What microphone do use?
@BaptistePitois
8 жыл бұрын
Thanks you so much for your comment, very encouraging ! :) I'm usinc a Panasonic HDC-SD90
@Ishak.babinsa07 Жыл бұрын
Bos biasa buatkan breket dan sambungan ke towing untuk exfander ultimate
@basemkhoja44985 жыл бұрын
Very very good
@clist94065 жыл бұрын
Good idea , a little on the primative side for me. Everything I design is over engineered past the point of practical , it's my weakness. I would have done something similar but out of 3/4" plate and a forklift to pick it up.
@CattleRustlerOCN5 жыл бұрын
Nice job. You might want to consider a MIG welder and Argon + CO2 setup for this kind of work. It produces cleaner smoother weld beads compared to stick welding. Just a thought.
@r3d3jf2 жыл бұрын
Cortou a lataria do carro 😳
@wrenchist8 жыл бұрын
Great build. this is the second time i have sean those tailights. where did you find them?
@BaptistePitois
8 жыл бұрын
These are the stock ones from the Disco 2
@outdooradventures88224 жыл бұрын
what arc welder are you using ? i dont recognize the yellow color
@elitecrew26208 жыл бұрын
holy shit good job man
@BaptistePitois
7 жыл бұрын
Thank you !
@SchizoGamingChannel3 жыл бұрын
nice
@bushcraftandfriends14716 жыл бұрын
Hey man great job. Do you thing you could give the dimensions of that if you still have them?
@BaptistePitois
6 жыл бұрын
I didn't have dimensions ... sorry
@Daniel-cr1ou7 жыл бұрын
do you have the design with measurements?
@masonx3bm8 жыл бұрын
very nice job! have you made a front bumper yet?
@BaptistePitois
8 жыл бұрын
+masonx3bm Thank you, I bought the front bumper, you can see it being mounted in one of the last videos :)
@dterik4 жыл бұрын
What size tube did you use?
@mattiaboi73403 жыл бұрын
Ho un discovery td5 dovrei costrirmelo pure io, hai qualche "spaccato" o disegno, con misure spessore del ferro da potermi formire? Grazie
@roach_d214 жыл бұрын
What grade steel do you use?
@eduardoalbertovioconejero8046 жыл бұрын
Soldado como la callampa
@hunting39315 жыл бұрын
Труба 100×100 ?
@alijasmani76413 жыл бұрын
Kl yang punya kijang kapsul standar untuk depan xcontohnya seperti apa bos
@passionchienscourantschass16055 жыл бұрын
Salut Baptiste avec quelle type de plaque tu a fait ton par buffle ?
@BaptistePitois
5 жыл бұрын
Salut M'sieur, c'est de la tôle basique de 3mm d'epaisseur
@RobKiss19818 жыл бұрын
Very well done! Did you ever consider to try out Mig welder? It's much better for this kind little home projects. ;-)
@BaptistePitois
8 жыл бұрын
+Rob K Thanks Rob, yes of course but money is missing !
@Claytons917 жыл бұрын
what was the measurements for the bumper?
@BaptistePitois
7 жыл бұрын
Sorry, I didn't kept the measurements. But if you want a storage system including a sleeping platform you can check my latest videos, you will find some measurements. 😉
@lanceroark63866 жыл бұрын
It's a lonely day...
@silver-gs8ne5 жыл бұрын
What is the thickness
@BaptistePitois
5 жыл бұрын
it's 3mm
@tatarehatta26146 жыл бұрын
I want the bumper for my cherokee, can you give the adress to contact, thanks.
@BaptistePitois
6 жыл бұрын
Well, that's me !
@weawenaweon55567 жыл бұрын
i bet that Bumper costs more then the truck
@BaptistePitois
7 жыл бұрын
Around 160€ bumper including grinder discs & epoxy paint.
@weawenaweon5556
7 жыл бұрын
+Transsmission how much is that in dollars
@BaptistePitois
7 жыл бұрын
170$ & I got spare steel sheets for other projects
@cefeeuliarte55225 жыл бұрын
That music ...hoorrrwww make it stop
@timyerby6 жыл бұрын
Video is ruined by pop up ads for other videas.
@jameslindley83185 жыл бұрын
Welding ??????????
@BaptistePitois
5 жыл бұрын
It's more like glueing
@BaptistePitois
5 жыл бұрын
But it HOOOOOLDDDDS
@jameslindley8318
5 жыл бұрын
@@BaptistePitois ITS SHIT BUD , GET SOME PRACTICE, ITS PISS EASY, YOU JUST NEED PRACTICE, IF YA GONNA DO IT , DO IT RIGHT AND PROFFESSIONAL
@matthewfox37605 жыл бұрын
Google 4 inch cut off wheel accidents... 🚑
@ghostofdream8 жыл бұрын
shitty welding tho
@BaptistePitois
7 жыл бұрын
I'm far from being a professional welder
@mountain_man1432
7 жыл бұрын
ghostofdream it doesn't have to look pretty, it just has to hold
@psy06
6 жыл бұрын
its hard to do good welds with stick on sheet metal. as long as they are strong welds thats all that matters. should get a mig welder to make your life much easier
@Billojava
6 жыл бұрын
Can you even 6g bro
@AC-yi3qb
6 жыл бұрын
You just set off the tiny dick alarm 🚨
@tommywright83696 жыл бұрын
Nice fab job bro but next time don't ruin all your hard work with welding like that. Fit it up yourself and pay someone who knows how to weld. And yes, I am a professional welder.
@BaptistePitois
6 жыл бұрын
Thanks Tommy for your advice ! 😃 Money issue haha! It was my first welding project, just after giving a try on a straight line! But I'm glad it's still strong & doing it's job!
@tommywright8369
6 жыл бұрын
Your fitting skills are top notch. I was surprised at your welding as good a fitter as you are. You’ll get it. I subscribed by the way
@MrBowhuntershane
5 жыл бұрын
Only one way to learn! Keep at it champ
@houstonbigfooter6 жыл бұрын
Learn how to weld.its not that hard to run a decent flat bead.
Пікірлер: 121
Everybody in the comments section of KZread is a professional welder... Funny how none of them have their own vids showing how it's done. Too busy talking shit, I guess. 😂😂😂
@linkmarine
6 жыл бұрын
that's right!
@liogonzalez8813
6 жыл бұрын
😂😂😂😂😂
@Bodgemiester
5 жыл бұрын
Bout right
@awkwardsilence3375
5 жыл бұрын
I was about to post a comment on "where did you learn to weld" but...
@cerna344
4 жыл бұрын
I belive this is actually a good vid. I never consider on cutting the corners and then bend the sides for a better shape. Thanks!
Nice to see there are still people who know how to arc weld :) Great video, thanks !
You are hell with that grinder son! Must all that i have watched was cut with plasma cutter! bumper looks great!
Old school done with a stick welder. Very nice.
Nice work young man,I built one about 15 yrs.ago.used a chunk of 10×10×1/4 sq. Tube similar to yours.tucked a winch inside.extremely strong.A bit heavy! I started welding back in 77.
Great music!!!! Thanks for sharing!
Great job!
Pas mal les soudures, dommage qu'il n'y aie pas plus de vidéos comme celle-ci sur youtube.
Great video Good job .
Nicely done mate. Great light protectors. Cheers for sharing.
@BaptistePitois
6 жыл бұрын
Thank you !
V good job.... helpful hint if you brace your welding hand against something while welding your welds will be grade even better..
thats badass
Nice camera work, nice editing, nice bumper, nice disco. This is perfect ! Thanks for sharing with us !!! Can't wait to see how it performs now :) :) :) :) :)
@BaptistePitois
8 жыл бұрын
+Xavier P Stay tuned ! Coming soon ! ;)
Hell YEA! Finally some studs stick welding. No welders in this video were triggered.
Nice job 👍
Romanian Tony Stark hard at work!
bIG ups BRO......good job!!!
great video!! I love that music
Nice work
proper nice job with that, i bet you are well chuffed. Excellent job. Great bumper, great video, great work.
@BaptistePitois
8 жыл бұрын
+Fraser Gordon Thank you Fraser.
Mig would have been better for the application but good job doing what you could with what you had. Bravo 👏
Great Job!
@BaptistePitois
6 жыл бұрын
Thanks Matt 😀
Great work, Baptista! Your custom bumper looks cool! I'm bad welder )))
@BaptistePitois
6 жыл бұрын
prosvadba.pro I'm not a good welder too, but I can weld haha
@fotostudio68
6 жыл бұрын
Transsmission great work!
Great to watch the process! Thanks for sharing these videos. Such great fun to see these trucks being used for what they are bred for! Jealous that the TD5 was not sold in the USA, however :/. Subscribed!
@BaptistePitois
8 жыл бұрын
+Joe Thanks Joe !!
Great video! Ignore the negative bullshitters! I'm subbed!
@BaptistePitois
6 жыл бұрын
Thank you Tom ! I'm always looking to improve my work so I like having "negative" comments, but true is I prefer having explanations too 😊
Good job
What size box section did u use bud nice build thinking of having ago my self got a d1 so ideal
that's great
Good job. Wouldn't listen to stupid comments. Not everyone can build something cool with minimal tools and equipment.
@BaptistePitois
6 жыл бұрын
Many thanks Ken!
Beautiful video
@BaptistePitois
7 жыл бұрын
Thanks :)
très beau travail !!! :D
@BaptistePitois
8 жыл бұрын
+DarkiiDen Merci beaucoup !
@DarkiiDen
8 жыл бұрын
+Transsmission ca c'est le genre de truc que j'aimerais faire quand je serais en possession d'un 4x4 :D mais c'est pas pour tout de suite x)
amazing
Your videos are always so engaging :), The topics for your clips are on point :), This vid of yours had me glued to the screen:), What camera do you use to shoot your episodes?, What microphone do use?
@BaptistePitois
8 жыл бұрын
Thanks you so much for your comment, very encouraging ! :) I'm usinc a Panasonic HDC-SD90
Bos biasa buatkan breket dan sambungan ke towing untuk exfander ultimate
Very very good
Good idea , a little on the primative side for me. Everything I design is over engineered past the point of practical , it's my weakness. I would have done something similar but out of 3/4" plate and a forklift to pick it up.
Nice job. You might want to consider a MIG welder and Argon + CO2 setup for this kind of work. It produces cleaner smoother weld beads compared to stick welding. Just a thought.
Cortou a lataria do carro 😳
Great build. this is the second time i have sean those tailights. where did you find them?
@BaptistePitois
8 жыл бұрын
These are the stock ones from the Disco 2
what arc welder are you using ? i dont recognize the yellow color
holy shit good job man
@BaptistePitois
7 жыл бұрын
Thank you !
nice
Hey man great job. Do you thing you could give the dimensions of that if you still have them?
@BaptistePitois
6 жыл бұрын
I didn't have dimensions ... sorry
do you have the design with measurements?
very nice job! have you made a front bumper yet?
@BaptistePitois
8 жыл бұрын
+masonx3bm Thank you, I bought the front bumper, you can see it being mounted in one of the last videos :)
What size tube did you use?
Ho un discovery td5 dovrei costrirmelo pure io, hai qualche "spaccato" o disegno, con misure spessore del ferro da potermi formire? Grazie
What grade steel do you use?
Soldado como la callampa
Труба 100×100 ?
Kl yang punya kijang kapsul standar untuk depan xcontohnya seperti apa bos
Salut Baptiste avec quelle type de plaque tu a fait ton par buffle ?
@BaptistePitois
5 жыл бұрын
Salut M'sieur, c'est de la tôle basique de 3mm d'epaisseur
Very well done! Did you ever consider to try out Mig welder? It's much better for this kind little home projects. ;-)
@BaptistePitois
8 жыл бұрын
+Rob K Thanks Rob, yes of course but money is missing !
what was the measurements for the bumper?
@BaptistePitois
7 жыл бұрын
Sorry, I didn't kept the measurements. But if you want a storage system including a sleeping platform you can check my latest videos, you will find some measurements. 😉
It's a lonely day...
What is the thickness
@BaptistePitois
5 жыл бұрын
it's 3mm
I want the bumper for my cherokee, can you give the adress to contact, thanks.
@BaptistePitois
6 жыл бұрын
Well, that's me !
i bet that Bumper costs more then the truck
@BaptistePitois
7 жыл бұрын
Around 160€ bumper including grinder discs & epoxy paint.
@weawenaweon5556
7 жыл бұрын
+Transsmission how much is that in dollars
@BaptistePitois
7 жыл бұрын
170$ & I got spare steel sheets for other projects
That music ...hoorrrwww make it stop
Video is ruined by pop up ads for other videas.
Welding ??????????
@BaptistePitois
5 жыл бұрын
It's more like glueing
@BaptistePitois
5 жыл бұрын
But it HOOOOOLDDDDS
@jameslindley8318
5 жыл бұрын
@@BaptistePitois ITS SHIT BUD , GET SOME PRACTICE, ITS PISS EASY, YOU JUST NEED PRACTICE, IF YA GONNA DO IT , DO IT RIGHT AND PROFFESSIONAL
Google 4 inch cut off wheel accidents... 🚑
shitty welding tho
@BaptistePitois
7 жыл бұрын
I'm far from being a professional welder
@mountain_man1432
7 жыл бұрын
ghostofdream it doesn't have to look pretty, it just has to hold
@psy06
6 жыл бұрын
its hard to do good welds with stick on sheet metal. as long as they are strong welds thats all that matters. should get a mig welder to make your life much easier
@Billojava
6 жыл бұрын
Can you even 6g bro
@AC-yi3qb
6 жыл бұрын
You just set off the tiny dick alarm 🚨
Nice fab job bro but next time don't ruin all your hard work with welding like that. Fit it up yourself and pay someone who knows how to weld. And yes, I am a professional welder.
@BaptistePitois
6 жыл бұрын
Thanks Tommy for your advice ! 😃 Money issue haha! It was my first welding project, just after giving a try on a straight line! But I'm glad it's still strong & doing it's job!
@tommywright8369
6 жыл бұрын
Your fitting skills are top notch. I was surprised at your welding as good a fitter as you are. You’ll get it. I subscribed by the way
@MrBowhuntershane
5 жыл бұрын
Only one way to learn! Keep at it champ
Learn how to weld.its not that hard to run a decent flat bead.
@BaptistePitois
6 жыл бұрын
I promise I will daddy
@Wrenchmonkey1
6 жыл бұрын
Houston Bigfooter Fucking trailer trash troll...
Great job!
@BaptistePitois
7 жыл бұрын
Thanks !