Hey Peter: Hope everything is ok with you ?. Certainly missing your repair videos, always look forward to seeing them.

Hello Peter, Are you doing ok? It has been almost 2 months since the last video and we miss you. We hope all is well and will be seeing some new videos soon. If you are having some medical problems, we pray for your complete recovery! 73, Ski

Peter, I'm hoping your OK, it seems such a long since your last appearance , we all miss you dear friend, 73, Paul de M0BSW

Dear Peter, following your last message for the new hear holidays, it was a very long time. I hope find you well, you and your family. Please we miss very much your nice videos and we are waiting for it ..... all the best for you and for your family. Giorgio

Oh, i am not the only one who is worried about you, I Hope you are well, I always look forward to the next video on saturday, hope to see you soon.

Thank you for the thorough explanation! Your explanation and walk-thru of the steps made it so much easier to understand! You are a blessing for us all!

@TRXLab

5 жыл бұрын

Thank you for the kind words Jennifer! 73

I just finished watching all your videos on KZread and want to thank you for providing these. I have learned a lot. I hope at some time in the future you will continue with posting repair videos here on KZread. Thanks again.

I hope you and your's are doing ok! The Ham\maker community misses you greatly. Love and respect form North Dakota USA, 73 De N0ZFG

:( What`s happened to my fav channel, I miss your vids so much. Hi` from England, pls come back soon..

Learned a lot. Thanks Peter! Its really amazing how much figuring is involved in such a simple looking device .Thanks . 73

@TRXLab

5 жыл бұрын

Thank you Richard, yeah electronics is always a lot of math...73

A great demonstration of the maths involved to design just a simple antenna. Keep up the great work Peter.

@TRXLab

5 жыл бұрын

Thank you Karl 73

Hi Peter, Solid and thorough explanation. Thank you for the video. Have a great week.

@TRXLab

5 жыл бұрын

Thank you

Hi Peter, we miss you. Hope all is well my friend. Please come back soon.

Hi Guys, just seen the comments about Peter(my neighbor). I can tell you, that everything is ok with him but he is very busy in the moment. Farther there are very few projects in the moment to present videos continously. So Guys, don't worrie, the things will get better again.

@agronaught7991

5 жыл бұрын

Phew! We were concerned. Thanks for letting us know.

@tedfrisk4730

4 жыл бұрын

Thank God hes Ok, we all were concerned about Peter....

@paul-c7541

4 жыл бұрын

That's good he's a much respected tech on here, I've learned a better way and fast way of doing repairs and trouble shooting thank to Peter, 73 Paul

@bigbone88

4 жыл бұрын

peter and mike....mike and peter

@OrbiterElectronics

4 жыл бұрын

Thank you for posting this Werlaf mate👍 Good to hear Peter is fine.

It's another MASTER CLASS as usual. Congrtulations Peter. 73 PY5MM Mauricio from Brazil

I sure miss having this guy around,, I love his videos and have learned a lot from him. I'm hoping he is well,, I'm sure we all are.

Peter, a lot of people are a little worried as I am. Please let us know that you are OK and all is well.

Wow. I forgot just how much I forgot my advanced license studying. Great video. Loved it.

@TRXLab

5 жыл бұрын

Thanks for feed back Steven 73

Brilliant video. Thank you for wanting to do this for your viewers. I will make good use of your instructions.

@TRXLab

5 жыл бұрын

Thank you glad that you have any use of it...73

That is what I’ve been searching for!!! Thank you sir!!

@TRXLab

5 жыл бұрын

Glad that you liked it. Thanks for watching

Hi Peter, wishing you and your family and fantastic Christmas and a prosperous new year - take care.

I really miss your videos Peter, but more importantly, I hope all is well with you and your family. Wishing you and your family happiness, and health this holiday season. 73, from your friend in New York City, Keith.

Thank you Peter for another great video.

@TRXLab

5 жыл бұрын

Thanks for watching 73

Another outstanding presentation from Peter. This made me want to set up a small spreadsheet with all the variables so I can immediately try out the various approximations and get the answer for the value of the inductor and the "tapping point" of the coil as an auto transformer. Ausgezeichnet!

@TRXLab

5 жыл бұрын

good idea with the spreadsheet Peter....Thanks for watching 73

@peterjones3245

5 жыл бұрын

@@TRXLab I'll post a copy!

Great video Peter and thanks for the 11m specifications ;-)

@TRXLab

5 жыл бұрын

Thank you Luke

Merry Christmas and Happy New Year Peter all the best to you in the new year. 73

Good video and an appreciated refresher for me. I found myself at one point deciding to suggest that you put the finished product on an analyzer to show the response over frequency, but then I should have realized you would already be doing that! This video has also re-enforced my awareness of the need to purchase some metric measuring instruments. It may not be the "standard" here in the USA, but I happen to like the Metric System and look forward to using it. Now to find some place where I can purchase the tools! Keep up the excellent work!

@TRXLab

5 жыл бұрын

Glad that you liked it Wayne! A I understand the issue with the metric system..., thanks for explaining 73

Thanks Peter Very Good Explanations as always

@TRXLab

5 жыл бұрын

Thank you Konrad

Like so many others im worried about you. It's been 11 months since this last video and nothing's been heard since. I hope you are well. You are certainly missed. Your videos are excellent and you seem like the very embodiment of what it means to be a good member of the ham community. Thanks for the huge number of things you gave taught me. 73 de W1CBD

Now I am convinced that it is worth investing on a good LCR meter. Thanks for this deep analysis, 73

Gday Peter I nearly didn't watch this one but I'm so glad I did what a great refresher. I googled the calculator and it kept suggesting the fx-82AU plus to me. I ended up searching for both the fx-83DE is for Germany the fx-82AU Is sold in Australia where I am. DE and AU in the naming convention. I thought hat was pretty neat and found an fx-82ES And thought it would be for Spanish speaking countries but it isn't looking that way at the moment. We had a similar setup to this antenna in Australia and people called it the butter box because the tuning capacitor was housed in a butter box or Tupperware to protect from the elements. I haven't really seen this setup since the 70s though. Cheers

@TRXLab

5 жыл бұрын

Glad that you liked it! I wasent aware on the different county versions..Thanks for clarification!

Thank you for your videos. Hope all is well.

Hello Peter. Hope you are OK. I always enjoyed watching your videos. Lots of information, well presented.

Excellent video Peter... keep up the good work 73 Eddie

@TRXLab

5 жыл бұрын

Thanks Eddie 73

Hoping you are well, I can not find an E-Mail address to contact you direct .

Thanks for all your hard work

@TRXLab

5 жыл бұрын

Thank you Garry

Great video and a refresher of all the things that have forgotten ! 73 N8AUM

Hi Peter, We all miss your videos. I hope you are well and one day you will return. Until then, I re-watch all your videos. I can never watch to many times and learn more every time. 73 Jim

One over two pi root LC gives you the resonant frequency LOL. I have built many antennas, from verticals to quads, but I have not come across this particular one before. Great video and explanation. 73’s Lynton.

@TRXLab

5 жыл бұрын

That is the beauty we all can learn at any time something new. Thanks for stepping in 73

Nice explanation Peter, very nice to show the auto transformer to, its much easyer to handle for the community of our fellow radio amateurs.. speaking of 2m, i would personally as a travel antenna just cut the breid from the center wire in the coax and fold it out to a dipole, but for HF its a little bit bulky ofcourse :-) again nice video... keep it up 73´s Anders

@TRXLab

5 жыл бұрын

Well there are so many concepts with advantages and disadvantages and this concept is one of those :^) Thanks for watching 73

Now it is more than a year since we last heard anything from Peter, what has happened to him? Peter we miss you, your excellent films and the way you explain. You are, together with Mr Carlson, the best electronic "teacher" on KZread. If you read this, and are very busy, at least take one minute to tell us you are ok. 73 LB5JG Asle

Hello Peter, I was just wondering where you were as we've not seen you about for a good while now. Hope everything is ok buddy? Cheers John

Thanks for letting us know, that Peter is OK. Please let him know his friends are missing him, and we have many Ideas and projects for him.

Also we would like to know what makes a Dipole having a diffeence Impediance of any End Feed Antenna? You explained a good point just that it would be of interest why with the same Material used the difference would be that huge.

Peter, tell me where are You from, I want to go there and buy You at least a few beers :D! Awesome job, great knowledge and wonderful troubleshooting on Your movies. Absolutely one of best channels on yt!

@jimgiordano8218

4 жыл бұрын

Azzy, If I had to guess, I would say Austria or Germany, but hold me to that.

@wiekpawel

4 жыл бұрын

@@jimgiordano8218 Yea, one of German countries for sure. I hope Peter is back soon, I am missing his repairs ehhh I hope everything is all right. Take care in this crappy time and Happy Easter despite the undercooked bat crap ;)

Great video and explanation, thanks 73

@TRXLab

5 жыл бұрын

Thank you 73

Great project, always waiting for more of your great videos,, Thank you Peter

@TRXLab

5 жыл бұрын

Thank you Dennis!

Ciao Peter! its ages that we haven't see any new vieo....are you ok? we miss you very much! please come back! 73

That is good news, great to hear that Peter is OK and there is nothing to worry about. How do I find his Community page?

@Aleziss

4 жыл бұрын

where did you get the information ? what is going on with Peter ?

@Rich-fr5td

4 жыл бұрын

@@Aleziss Peter Neighbor is Werlaf. Werlaf left a message 4 months ago in these comments, saying he is very busy and that he is OK.

@Aleziss

4 жыл бұрын

@@Rich-fr5td ok thank you for the precisions !

@ExtrangHero2023

4 жыл бұрын

I read something from one of the comments on his other video that peter is ill. Not sure if that is true

beautiful tutorial

@TRXLab

5 жыл бұрын

Thank you

Hi Peter, Nice antenna build. I did some research on Josef Fuchs. Was a nice read on his antenna design. 73 WB3BJU

@TRXLab

5 жыл бұрын

Thanks Donald. Yes indeed Josef Fuchs was an interesting person..73

Dear Peter, i have learned a lot of your videos, i hope you are fine. You certainly know that me as 1 of your fans, am missing you very much and hope to get news from you soon. Be well and take care for yourself, especially nowadays. Alles Gute mein Freund! 73, de Chris ha7wx

Great video with fine examples on how to do the calculations, Peter! One thing: I thought you mentioned the antenna wire should be longer than the calculated 'lambda /2'. In reality, the wave travels slower in a conductor than in air, so the wire will be shorter (by a factor of 0.9-0.95 times the wavelength) Of course, you need to start with a longer wire and cut it to resonance later, as you said. I have the great Rothammel Antennenbuch, which has about every imaginable antenna type Stein, LA9QV

@TRXLab

5 жыл бұрын

Thanks for feed back. Yes you are right with the velocity factor but I did not want to bring more mathe into it. I already thought it was to much...

To all the people who wrote in the comments that they are worried about Peter. He is fine, just very busy. Go to his community page and you can see that he wrote there 4 days ago to say just this and wish you all Merry Christmas. Have a great new year everybody.

@W-733_KWX

3 жыл бұрын

what is his community page?

He was a good and smart man.

@Werlaf

3 жыл бұрын

He is...... ! Didn´t you recognize his comment three weeks ago?

@Werlaf

3 жыл бұрын

... under the comment from "boxingday11"

@ronvaliant9337

3 жыл бұрын

Werlaf I will look

hello peter just wondering if you are using the hakko fr-810 still. seems like everyone only wants the quick unit.

Miss your videos Peter and Mike's. Realy wish you both could make some more videos. We know the camera gets in the way but there ways of making the camera so it isn't in the way like mounting it over head. Hope your staying safe. God speed. 🙏🏼

Nice example video Peter! Folks can avoid some of the manual math by getting the ARRL's "Single-Layer Coil Winding Calculator" (if you don't mind working in inches) to quickly determine the coil length, turns per inch vs. wire size you want to use etc. It's a slide rule style cardboard calculator (I'm sure there's an app for that nowadays!). I followed along using it and your calculations and came up with basically the same values. Still have to do the Z transformation though to figure the tap location. Thanks again Peter! 73 - Dino KL0S

@defaultuser000

5 жыл бұрын

There is an app for that. Well, a website with online calculators and downloadable PC software. Here's the link to their single-layer air-coil calculator. The PC software allows you to calculate the capacitance and Q of the coils as well. They have quite a few useful inductor calculators. coil32.net/online-calculators/one-layer-coil-calculator.html

@TRXLab

5 жыл бұрын

Thanks for the hint Dino, that is surly very helpful! Glad tha you liked it 73

Hello Peter , this wire for the coil please help me with the specifications , is not magnetic , in my country is difficult to find only for internet, thanks

great explanation... thank you.

@TRXLab

5 жыл бұрын

Thanks Joop

Hi Peter my name is mark I have question I have ts440s tx are OK but I receive in DSB LSB and USB could it be my DSB filter why can't I select one side band ,thanks in advance

Thank you so much for this wonderfully informative video. 73 Chaz W2CHZ

Hi Peter, great video. Curious, the equation to calculate the value of the coil doesn't include permeability of the core. I noticed in some of my old electronics books that permeability is multiplied where you normalize with the 1nh. Does this equation use relative permeability? where air is around 1 as I noticed most equations use approx. 1.26 X 10-6 . I hope my question finds you well.

This video is really highly instructive! Thank You, Peter. But if you not German-speaking viewers are about to search the internet for this type of antenna to get more (background-)information, use the term 'Fuchs-antenna', because 'Fox-antenna' will probably lead you on a false trace. Fox is the English word for (German) 'Fuchs', which happens to be the name of the inventor (Josef Fuchs) of this antenna. And the described matching unit is a Fuchs-Kreis, I'm not sure if it’s called 'Fox-circuit' in English, but it’s probably not.

Peter, I hope all is well. Looks like everyone is as worried about you as I am. Hoping to see you back on the air soon.

LOL! For 20 years I taught that LC "resonance equation" at University level, and I never knew it was called "Thomson's Formula"! But the "Fuchs Antenna Coupler" I DID know! (But PLEASE Peter, don't use R when you mean Z for the inductor impedance ratio!)

The coil wire is tin or silver plated copper coil wire. SOLID silver wire is very expensive and used in making jewelry. Great instruction in using the maths.

@TRXLab

5 жыл бұрын

You are absolutely right David! Thanks for watching and comment 73

Wenn ich eine endgespeiste Langdrahtantenne aus Bronze mit der Länge 40 m habe, woher weiß ich dann deren Impedanz? Es geht nur um Empfang im 20 und 40 m Band. Wenn es auf 80m und 160m läuft, um so besser. If I have a end fed bronze long wire antenna with a length of 40 m, how do I know its impedance? It's all about reception in the 20 and 40 m band. If it runs on 80m and 160m, so much the better.

Hi, your videos are very very good .. excellent job ! .. I would like to request you to make 1 video on the impedance matching over the pcb using your miniVNA Tiny .. no such excellent video is available on the net as far as i have searched for past 1 month. I am trying to learn on how to do impedance matching of my GPS antenna using the miniVNA but couldn't find any good source.

Hi. Sorry if this is a tiny bit off topic but perhaps you can help solve this query that is stuck in my head :D Basically the question is weather or not it might be a good idea to use a Bal-Bal transformer at the feed-point on a doublet to match it to the balanced transmission line. The question came about after someone asked if they could use a 1:9 Un-Bal to match their coax to their 450 ohm transmission line. Many people were saying that it would be pointless trying this due to the unknown impedance of the entire system. So i proposed that he used a bluetooth antenna analyser to measure the impedance at the feed-point. Once the impedance of the active elements is known then i would have thought we could match the antenna to the feedline with a Bal-Bal transformer. Then since the system should now be sitting at 450ohm he could then use a 1:9 Un-Bal where he goes from 50 ohm coax to the 450 ohm balanced transmission line. I was just surprised that i have never come across this theory and wondered if there was a reason why it might not work. Perhaps it would affect the way that a doublet works and make it less effective as a multiband antenna? 73's

Excellent video...,just only one question about .., voltage tolerance for the capacitor..., how many volt consideration these cap.., could be support...?.., thanks YV6ENB

hello very good Learning job you provide. could explain how you will build a 1/2.25 balun for a delta loop. thanks again

Just checking to see if you are ok, and I see others are wondering also. Hope everything is good. 73, W9DXX

Hey Peter, missing your vids, hope you are ok...

we miss you

Please come back to KZread we all miss your videos.

Re: Calculators. I still prefer GW Basic to a scientific calculator (I run it in DOSBox). It is so much easier to review my calculations and I am always close to my computer or a laptop when I am at the bench.

Good job. Thank you very much, I learned a lot. Isn't easier to add second half of 2m dipole? ;)

@TRXLab

5 жыл бұрын

Thank you Tomek. Well what good or bad is the view of the observer...

-Hello Peter, are you ok? I Hope everything is ok with you. We all miss the great and informative videos you make here om KZread. 73 from Norway, LB5JG

Hi Peter did you mention anything about the Velocity Factor when calculating antenna lengths or did I miss it, as far as i remember it has to be 5% shorter than the conversion figures...like 300 /f = 9 mts, minus 5%, at the end of the day the swr meter wil tell you the match anyway uk 2 meter band is 144 to 146 (or 147) now I think...from Fred g4vvq in uk.

@TRXLab

5 жыл бұрын

No Fred you did not miss something I simply did not want to meake it even more complicated for the folks.., but you are right on the velocity factor.. Thank you 73

@fredshead7114

5 жыл бұрын

Yes I understand Peter, at least it would be long enough to cut some off, better too long than too short lol..Fred.

Could the LC circuit be mounted on perf board so it's a bit more solid?

@TRXLab

5 жыл бұрын

normally when it is mounted in the tin it will be solid enough...

@bblod4896

5 жыл бұрын

@@TRXLab Thanks.

Hello Peter we miss you on KZread hope everything is fine with you. Let us know if your not doing any more video's or just taking a break. OR fixing the MEGA REPAIR and it's taking months to due. So once again if you have the time send us a message. *CHEERS* from *TODD* *_73_*

Hey Peter, I have been following you for a few days and admittedly I underestimated your abilities. I would like to apologized formally and publicly! I am looking forward to following you and all your videos. Again please forgive me for my error. Be well.

Hi Peter, great video! Please now one for EFHW antenna and UNUN for 160m, 80m and 40m. Thanks 73, ZR6PSR

Great video, I've been wondering how to work those equations with too many unknowns. Question: at 44:17 you have 55 mm squared on the denominator of the equation to find the inductance (L) for 8mm diameter coil, why 55 mm squared? I think that you wrote the exponent 2 by accident as you didn't squared the 55mm when you entered things in the calculator. Personally, I don't like putting units inside my equations but in their own equations to the right of my calculations.

@danluzurriaga6035

5 жыл бұрын

Right, and as you say he did not actually square the 55mm in the calculation so it turned out OK. For units, I just separately ensure that they all cancel/multiply to the correct unit we are looking for, in this case nH.

@TRXLab

5 жыл бұрын

Yes you are right David my mistake

@danluzurriaga6035

5 жыл бұрын

When you have an equation with "too many unknowns", that does not mean the equation is unsolvable. You simply estimate values for the variables that seem to optimize your current circuit in terms of size, space, capacitance value and so on and plug in for a potential result. The resulting value will be correct, as are other possible results if you choose different values. For example, if you wish the coil to be 20mm long, then plug it in and based on the resulting inductance value, you can determine where the number of turns is to create the autotransformer from the 50 ohm impedance output of the transceiver. That is done all the time in circuit design.

@davidniemi4051

5 жыл бұрын

@@danluzurriaga6035 Thank you for the further explanation, I've been too single solution oriented.

I'm missing your videos Peter! Where are you? 73

Hope you are well.

A antenna video Yes! :) thanks Can you do this without The variable capacitor??

@berndb.5097

5 жыл бұрын

You can also take one or more fixed capacitors which has about the value. Then you have to tweak the coil (spread or squeeze, a winding more or less). The capacitor must also be able to withstand the voltage at this point. The voltage depends on the power of your transmitter.

@80Loke

5 жыл бұрын

@@berndb.5097 Ok i guess its not super important for an antenna that shall only be used for reciving?

@berndb.5097

5 жыл бұрын

@@80Loke True, and you do not have to pay attention to the voltage of the capacitor :-)

Miss your videos... I hope everything is ok with you and your family. 73

I use to do JOTA every year so I made a simple antenna that I could be on the air less than one hour.

@TRXLab

5 жыл бұрын

Ah very good hope you enjoy next JOTA 73

Hi Peter, how are you,hopefully everything ok, we are all waiting for you .. Hi from italy...

Ive read on some comments that he is ill. Not sure if that is true

Hi all friends, I ask you to hear from Peter. Thanks for collaboration

Hi Peter ! Are you ok buddy ?

👍 ✌

Where are you bud? Bored? Hope all is well !!

Hope all is okay.. miss your videos.

You and Mike have us a bit concerned. Peter. Hope all is well. We absolutely are missing you.

👍

HEY. PETER. HOW ARE YOU .. MISS YOUR VEDIOS