My 5-Band Attic Antenna for Ham Radio

Ғылым және технология

For those with smaller gardens, or indeed no gardens, the attic may be one of the best options as a site for an antenna. Whilst it is easy to install a VHF antenna in the attic, it can be even easier to install and HF antenna. Here, Peter G3OJV shows how it is very easy to install a multi-band HF antenna, even in quite a small loft or attic.
Your Ham Radio Store
www.hamradiostore.co.uk

Пікірлер: 21

  • @stevewheatstone1856
    @stevewheatstone1856 Жыл бұрын

    Nice one Peter, love the ladder line through the ceiling idea.

  • @W4BIN
    @W4BIN Жыл бұрын

    I have always used 75Ω coax with dipoles (73Ω) " 'cause the hand book says so." RG-59 or RG-11 for higher power. I always drill the holes in the ceilings in the corner of a closet and out under the door. Ron W4BIN

  • @jaywon555
    @jaywon555 Жыл бұрын

    Thanks for your time in making these videos Peter, as a green hand you've given me lots of knowledge and saved me time and hastle with your experience and skills, thank you.

  • @watersstanton

    @watersstanton

    Жыл бұрын

    Glad to help

  • @GordonHudson
    @GordonHudson Жыл бұрын

    I have a fan dipole for 17/12/10m in the loft. It works very well. It's an inverted V and I think that helps with angle of radiation. I also had two electric fence springs as a dipole. They were stretched to same length as a 17m dipole and fed via a 4:1 balun. It was resonant on 30m and didn't need an ATU. It worked surprisingly well but it was a very reactive load.

  • @MichiganPeatMoss
    @MichiganPeatMoss Жыл бұрын

    These are always great videos for review, at least until I rebuild my momentum when antenna work comes around amid other interests. Just when I feel accomplished, there's always something else to learn and take note of.

  • @davem7847
    @davem7847 Жыл бұрын

    Great video, have been using an Inverted V antenna (with extra leg length by zig zagging wire) from the ridge post since 1995. Inverted V has bi-directional radiation pattern (N/S & E/W). Not as good as outside beam, but gets me on the air, even with DX. Antenna design is a great thing to experiment with.

  • @JackCumming1
    @JackCumming1 Жыл бұрын

    Will definitely be trying this soon. Thanks 😀

  • @keithgabel755
    @keithgabel755 Жыл бұрын

    Thanks for this video! I can’t have anything outside due to HOA restrictions but can certainly use my attic space. I’m just getting started in ham radio but want to dig deep into it so I’m gathering as much intel as I can as I clearly have much to learn. Good, sort of basic overviews like this are giving me many great ideas. I appreciate that you don’t talk down to anyone, too, as some people can be so full of themselves you hate to watch their videos, even if the video is on a topic you’re interested in. Thanks!

  • @M0UAW_IO83

    @M0UAW_IO83

    Жыл бұрын

    There's lots of interesting laws about flying flags which might allow you to erect a very patriotic flagpole, one that might happen to need support wires running back to the house Good luck and good DX

  • @scottb.2022
    @scottb.2022 Жыл бұрын

    After I got my license 1 1/2 years ago, I installed an EFHA inverted V 4 band antenna in my attic. It has worked well, but found it was a bit noisy. Last fall, I installed a 4 band vertical in the back yard and the noise level is much lower. So, while the attic antenna worked, it had 1 to 2 S units more noise than the outdoor verical.

  • @alex-plays8407
    @alex-plays8407 Жыл бұрын

    Appreciate your content and that you share your experience - Thank you :-)

  • @watersstanton

    @watersstanton

    Жыл бұрын

    My pleasure!

  • @erpece
    @erpece Жыл бұрын

    I have used an indoor EF random wire antenna with an external tuner and solar panels in all directions on te roof. It is of course a comprimised antenna, but it will work fine for European contacts on HF.

  • @larsjohansson442
    @larsjohansson442 Жыл бұрын

    I am putting up a folded dipole in the loft. I hope it works as good in multiple bands.

  • @redstickham6394
    @redstickham6394 Жыл бұрын

    Great video! Doublets are pretty good. I had a doublet in the attic that was bent into a rectangle and it worked pretty well, but had some strange radiation pattern characteristics. It was fed with Radio Shack TV Twinlead into a MFJ 4:1 balun and tuned with an LDG Z11Pro auto tuner. I had to take it down when I had some work done in the attic and wasn't able to put it back up. I have recently built a linear loaded dipole and hung it in my attic and need to install the feedline, which is going to be 300ohm balanced line. I look forward to seeing how well it works or if it will work at all. That's a big part of ham radio, experimenting with something to see if it works.

  • @watersstanton

    @watersstanton

    Жыл бұрын

    Thanks for sharing.

  • @qutips33
    @qutips33 Жыл бұрын

    I have an elad fdm-duo and if I have too high swr foexsempel 6 in swr then the fdem duo stops sending and a warning comes on the display to high swr, and then I can't tune with the tuner, so a duplet antenna can have too high swr for the radio and that is a problem la2vla

  • @hartengel7724
    @hartengel7724 Жыл бұрын

    I have a question regarding this doublet: Is there a minimum/maximum ladder line length you can cut for this 5 bander. Great video thanks Hart va3kis

  • @watersstanton

    @watersstanton

    Жыл бұрын

    The ladder line can be any length.

  • @richardallison8745
    @richardallison8745 Жыл бұрын

    No one seems to talk about safety and RF exposure to the family in the house. At low power I am sure it might be okay but 100 watts and up I would do calculations to make sure. I am not sure why anyone in a HOA would do HF. I moved into a HOF one time and the HOF and I were always at odds. Now I live on 2.5 acres and no one bothers me.

Келесі