I admire how you and your brother worked in your dad's shop to honor his memory. That is a positive thing to do and a great way to honor him

Really loved seeing you and Jason working in your dad's garage .The very best way to spend your day together.. x

Sad about what the anniversary marks, but very very cool how you and your bro decided to spend it. I guarantee your Pops has a smile on his face a mile wide up there, seeing his boys in his shop. Good on ya bro... Killer Phat Moto by the way. 🤙🏼

It still trips me out watching you and then see your twin 😮

@metoon3092

4 ай бұрын

Right?

What a great tribute to your dad. You'll always miss him but you'll also always honor him.

I went to the Phatmoto website and these are actually pretty reasonably priced. With upgraded carb and exhaust, about $1200 shipped. Thanks for the video. Saw the notification yesterday, and when I opened it, it said "private". Was happy to see it pop back up.

@Rambling_Rover

4 ай бұрын

Better price and quality on those upgrades elsewhere. Go 799 while the sale lasts. Check out affirm.. 70 ish a month

@brushybillroberts2654

4 ай бұрын

@@Rambling_Rover Thanks for the advice on the upgrades. I won't need to make payments.

I have looked into Phatmoto for the last few years.. So Tempted to pick one up! And in my option VERY good price!

Great way of dedicating this to your father. Both you and your family need to heal. It does get easier as time goes by, but you'll still miss them the same. God Bless brother.

I was assembling bikes for Academy Sports and Target and my company furnished hooking letter openers with blades for removing tape, paper, and plastic from the unassembled bikes. Still use them after 15 years.

I have an original Phat Moto pedal bike- before they put motors on em! I'm going to chop it out and rake it and find the biggest fastest elec motor I can! Been planning it for yrs now- finally started on it a few week's ago! I've made a chain configuration for doubling the 7 speed gears and running a hubless rear wheel! I'm working on a suicide shifter at the moment! Next step after that is the frame chop and rake- then fabbing a springer front end! P.s. if you find an exercise bike, the seat is almost twice the size and they work great on Phat Moto bikes! Way more comfortable on us older bigger fellas trust me!

Wauw - what a nice gesture and way to honor your farther doing it in his shop And what a nice shop he had

That bike is really awesome. You know what else is really awesome? The grilled cheese cheese burgers I made today. What I do when I seat fat tires is as they are inflating with my little rechargeable compressor, I pull up on the tire until I feel it seating in the rim and as it's inflating the rest of the way, I work the tire back and forth all over the rim to make sure it's perfectly lined up and I can feel it as it's seating.

me 2 i love to see you and your brother working together god bless

Perfect instructional video. A link for video should be included by manufacturer. Nice to see you and your brother keeping your Dads memory alive

Love your videos dude i keep learning so much from them thank you🤘

always looking forward to your video.thanks for sharing and taking us along

I really like all the Phatmoto videos you do. Thanks for doing so many of these.

@isaacitllbefine7231

4 ай бұрын

Glad you like them!

Isaac this Old Man loves watching your videos ❤️. I know your Dad was smiling down and so proud of you two. Especially doing this in his shop👍. Hope to see you riding around town. You got me thinking. 🛵🧔💝

It's emotional. I'm glad you have your brother there with you. You two sound so much alike. Nice bike and yeah made in America 🚲☺❤take care!

Anytime that you're ins 24:10 talling a small engine you always run the bolts up from the bottom because the vibrations will keep the nuts tight if you run the bolts from the top down the nuts will unscrew from the vibration of the engine will unscrew the nuts that's why you always put the bolt in from the bottom to keep them tight

Love these videos with the bro!! ❤

OMG a GT interceptor BMX damn I miss my GT Dyno! Great video guys, I love motorized bicycles, Thanks for sharing!

Jason restored my USA Trek few months back, looks like I need a Phatmoto AT to add to my collection! Thanks for sharing.

Always good to see another Isaac vid :)

Spending time in your Dads old shop with your Brother. It doesn’t get any better than that. Stay close to your family and cherish every minute.

Beautiful bike !!!!

Great video bro I build these also except I have the 2 stroke version with Athena motor fun hobby

I love your videos that you do with your brother, especially these gas powered bikes. I had Schwinn with a 40cc engine that I had from 1981-1985 . I got a 1878 kz900 for warm weather and drove a 1966 mustang during cold weather (no heat) in Northern Ohio. Keep up the great work

@isaacitllbefine7231

4 ай бұрын

Very cool!

That bike is awesome! Looks like a lot of fun! Great video!

What a cool looking bike 👍👍

Wow. Isaac! You and your brother look like twins. I'm surprised. I think I've seen one of you around. I'm in L.A. archdale. Bless you. Thanx for video

They sent you the ‘Chuck special’! 😂🇺🇸

Your dad's shop looks well used...I would bet he had a good life...very cool bike...

Thanks just got mine will follow your directions

Excellent video Issac :) & brother Jason :) assembly that bike and so quite on engine running it too ! Well Done guys and I am happy you guys work together on lots stuff too congratulations too ! You have do Miles Per Gallon on that bike Issac and sure sweet looking one !

great stuff thanks

A great little additive for the bike just to make it more yours, get some Ammo Cans paint them Red White and Blue, and put on it in Old English "It Will Be Fine" and use them for saddle bags.

Thanks Ike!! Good video. Be safe and drive careless!! 👊👊✌️❤🤙🏼🤙🏼🤙🏼

Awesome bike Guys!

Im gonna save up and get one of these before summer.

Personally I like a good dose of blue lock-tite on the pedal threads instead of antisieze. It keeps them from backing out better and keeps the threads from rusting.

When that dinky plastic chain guide wears out you can go to tractor supply and get a pulley for a lawnmower deck that will last much longer . Of course you will need new hardware to fasten it . Also if that chain stretches fast you can get a #415 nickle plated chain from tractor supply as well .

Cool bike would be great in 4 of July parade 😊

Reminds me of a European track bike. They're W I C K E D !

When you can't find the Leatherman, the Brotherman is always prepared. Introducing the Brotherman , Swiss Army Pocket.

Came to check out the bike left subscribed... yall some cool folks!

@isaacitllbefine7231

3 ай бұрын

Thanks

It looks like the camera got you in a chokehold 😂😂😂

Love the G bike

Friday!! Best day of the week!! Have a good weekend ike

@isaacitllbefine7231

4 ай бұрын

You too!!

awesome.God bless.

Swap Hilliard clutch springs to 2 white and 2 yellow. Comes 4 yellow. To eliminate chatter on take off 👍

God bless y'all. Although the look on your face says phat moto needs more power!

Buy one of these used for half the price of new. They come with subpar parts new. Had a 2021 Phatmoto, was a good learning experience building it up.

so gorgeous , Isaacc~

Just got recommended this video, I had no idea isaac had a channel 😅

@isaacitllbefine7231

4 ай бұрын

Welcome!!

@chadwestwood9843

4 ай бұрын

​@@isaacitllbefine7231yeah I didn't know you had a channel either. Definitely subscribing. Hey did your all terrain have that clutch shake really bad before fully engaging? Mine did quite a bit before replacing two of the four clutch springs with the white ones to push the full engagement out to 2400 rpm. That reduced it quite a bit. How much do you weigh Isaac?

Good video keep it up

I wish petrol powered push bike were still road legal in Australia but unfortunately each of the states made them illegal.

@theLyzhendricks

4 ай бұрын

Fukem ride em anyways

@bryduhbikeguy

4 ай бұрын

I followed a couple people from their, with their bike channels.Glad to know it was Laws, and not accidents that took them off YT.

Ahh the goldmember reference nice touch 😂…. Also bless you lol

Bicycle shop man had an Alan wrench on demand. My brother would have a multimeter. 😄

Awesome bike!!!!!!!!!!!!

The close-up helmet cam at the end made you look like Liev Schreiber.

I been waiting since yesterday when you accidentally posted it haha

Condolences on your father. If you send AGK a 79 cc predator the will rework it to 105 cc and you can make it fit on the Phatmoto. It’ll be a pocket rocket.

You know that would make a pretty good gas/electric hybrid bike. Slap a front hub kit on it and the rear rack would be good for battery placement.

Hey ike what do you think on doing a mini bike chopper would be cool to see you build one .

nice bike.

Neat bike. I have new toys coming today, cant wait hehe😂😂

Anniversaries suck,RIP sir

❤😮🎉 very cool buddy 🎉 from cruzermans inventions 😁👍🦇

❤❤

Everyone online says these things just fall apart like the bearings are bad or not greased, bad spokes several things I almost bought one on sale they look amazing but I'd like Issac & his brother who I trust ( obviously great guys) to put some miles on one weekly on their own and tell us what breaks later

@isaacitllbefine7231

4 ай бұрын

Ive put alot of miles on them

I challenge you to a race My 212cc bicycle against your stock Phatmoto lol. love your show and cars and cameras. Bike looks good.

👍

Cool bike amigo right 👍 on

Holy crap there's two of them 😂

Yo that’s crazy I knew you had a brother but not a twin brother 🤯🤯🤯

What kind of modifications can be done to make extra power on that motor to gain speed?

Whoop!!!

what is the exhaust on your hearse it sounds soo good

@isaacitllbefine7231

4 ай бұрын

Straight pipe

Thinking about a 98 for the trail bike too, Isaac?

Sorry to hear that❤

it needs those five letters on it that the left hate😂💯🇺🇸

Awesome Bike ! Murica ! Great to see the fam working in Pops shop ! Take care.

Man I like your brother I subscribed to his channel but I had to stop I don’t do bicycles if he had more than that I’d stayed Nothing personal I just never got into old bicycles

@shotgunz1248

4 ай бұрын

My whole family is gone dad and 2 brothers pasted young and mom pasted in October 82 fast from cancer also I’m only one left and I understand your lucky u got some left bud I’m going through the bs in Nc with the property because nothing was fixed Nc is difficult with it too make everything hard

My biggest complaint about the Phatmoto is they still haven't added a freewheel to the engine side yet, they're just so noisy when they coast, can't appreciate the sound of the engine. The 7 speed on the bicycle side is a little counterproductive too, but that can be fixed with a 16t freewheel.

mikuni, pipe, governor delete?

I'm guessing the version with regular bicycle tires is faster due to weighing less and less rolling resistance. Would be even faster with some Vee Speedster's on it (my favourite bike tire). That'd be the first thing I'd do if I bought one (well, next to putting my big old Person's saddle that I believe came off of a Whizzer on it). Not sure if they even ship these to the UK. Would probably cost a fortune if they do and the bike and/or engine getting damaged in shipping would be a concern. Also, my condolences for your loss.

Thanks for sharing, great video. Oh yeah! All it needs is a Trump 2024 sticker on the gas tank over the Phatmoto Logo 😁👍

you need to trade sides with them brakes. the right side on every bike is the front and you have it on the left side.

could you tell us where to go to purchase one of those bikes maybe a web site that handles or sells them

@theLyzhendricks

4 ай бұрын

Dude it's the title of the vid 😂😂😂

@isaacitllbefine7231

4 ай бұрын

www.gasbike.net

A bigger softer seat and it would be great

Oh, didn’t you do a video in his shop like a month or so ago when you pulled out that big old jeep

It's even worse that you are cutting towards your brother rather than yourself! How dare you.😂

I reversed the handlebar post and gave it a more board track racer look. charlie c

Nice did you get the 25 mph or 32 ?

@theLyzhendricks

4 ай бұрын

I get 33 on my 2 stroke motorized bicycle that I built for 130$

@isaacitllbefine7231

4 ай бұрын

I only got to the 20s because of the cameras

You should put a electric motor on the front tire like your other project

Is the engine a predator 79cc?

@curtisreece1346

3 ай бұрын

Lifan Industrial 3MHP 79cc 4 stroke engine

A lot of places now ticket or take your bike now if you're on the road because it's got a motor it has to be titled and plated with all the lights like a motorcycle

Tell ya the truth I’m more interested in the GT interceptor 😍🤙

Issac I'm Me please question about phatmoto and your brothers shop