2023 Ninja 650 with Delkevic Exhaust PEAK Horsepower
Спорт
This 2023 Kawasaki Ninja 650 came into the shop with a Delkevic exhaust and air fuel ratio's all messed up. After a Moore Mafia flash and tune, this bike left with NO restrictions and MAXIMUM horsepower.
Get your ECU Flashed by me.
Call me at 864-608-0119 or mooremafia.com/pages/ecu-flas...
Moore Mafia Drag Racing School
www.mooremafia.com/dragracing...
Moore Mafia Merch
www.mooremafia.com/shop
See some of the performance products we have at:
brocksperformance.com?aff=3
ENTER DISCOUNT CODE MooreMafia5 for a Special Discount!!!!!
Get 5% off on Voo Doo Exhaust Products Use code MooreMafia5 at checkout.
www.voodoomoto.com/
To have us make your bike go fast like ours. Just call me
864-608-0119 Tuesday-Saturday 9am-6pm EST
Click this link to get 10% off your Chin Mount
chinmounts.com/?ref=chrismoor...
Use CODE MOOREMAFIA10 @ checkout
Get a FREE INVISIBLE SELFIE STICK with a Insta360 X3 like I use...
store.insta360.com/product/x3...
Click this link to get 10% off your Dragy
dragymotorsports.com/?rfsn=63...
Use code MOOREMAFIA10 @ checkout
Follow us on Instagram
@chrismooremafia
@bigkountrymooremafia
Tik Tok
@mooremafia
Пікірлер: 108
Man I love this channel I was just about to look up a ninja 650 on dyno and here you go!!!
I have this bike with a Mivv full exhaust and of course that Moore Mafia ECU work!
Just shipped my 22 650 ECU in yesterday can't wait to get it back and see what we got
You will getting my ECU in the future 🤘🏽
Moore Mafia, y'all rock! ❤Peace
Finally another 650. I sent my 2021 Z650 ECU to Chris at Moore Mafia last year and I love the tune. I did feel her more sluggish than before the tune. But that may have been due to the fact that I’m from Puerto Rico and the elevation, temperature and fuels are different. Chris if you get to read this I love my bike and you do amazing work. If you could comment on that it would be great but not necessary. Love from Puerto Rico! Come hit the drag strip some time here in the island
@CryptolockerMD
4 ай бұрын
He can adjust for those variables and usually does, but you need to bring it up in your tune notes.
Cool beginner bike, looks good and just enough power to have fun, especially now with the MooreMafia touch👍🏻
@T3-RIDER
4 ай бұрын
A 650 isn't a beginner bike 😂
@tbrowning9643
4 ай бұрын
@@T3-RIDER at 50 horsepower stock, I would consider that a beginner bike. 👍🏻 I had a CBR 600 back in the 90’s that had more power than that and that was my first street bike
@elonmust7470
2 ай бұрын
@@T3-RIDERIt's definitely a beginner bike.. It's a complete toy compared to the supersports that Kawasaki makes...
@mr.darknight416
Ай бұрын
@@elonmust7470 just bc it has less than the 1l bikes or other supersports doesnt make this bike slow dude. its by now means a slow bike. I mean it does 0-100km/h in 3.5s
Sounds ok. Weld it up. When ready to change saw it off. That torque number is very respectable
@DaBuGzLiFe
3 ай бұрын
Zx6r exists for that reason. 😂
Mr Moore mafia my name is Dylan all the way from South Africa... Bro u are amazing at what you do... Never had the finances to own a bike of my own but please help me... Been subscribed to you from a very long time please send some love to south africa
Sending my 22 650 ecu in with the same exhaust. Boy runs lean as hell right now lol
Great vid, I have a ninja 650. Side Note, what are those ceiling lights?!
Please try and get some kspp throttle bodies for these, the stock are just soft rubber and squeeze at high rpm, thus crap top end. I have your flash, with a filter and the throttle bodies, I haven't been to the track yet to really test, but feels better on street anyway.
I have a golf tee jammed in my pair valve tube. 😂
Hey Chris as much as I would love to agree with you the problem with all the other pipes you recommended are in the $800 to $1k+ price range, maybe you try get hold of Hindle EVO Megaphone Full Exhaust System I'm curious how well it does over the Delkevic exhaust.
Great job. Just a smidge
I have a delkevic on my gsxr 750 also had one on my cbr1000 have vids of both on my channel gsxr exhaust clip under”yamawho”
Shorty pipes suck for the Ninja 650. There are reasons why Arata made a system that maintains back pressure. Leo Vince had a slip on too that had a windy mid pipe created for this exact reason.
I have this bike with the akrapovic. Im debating sending in the ecu
Been wanting to get my ECU flashed by you but wanted to get a full exhaust system first. What full exhaust would you recommend for a 2016 ninja 650? Ive been between the Yoshi and or the akrapovic. Any insights would be appreciated
Just got a Yoshi Stainless AT2 full system and K&N filter for my '18 GSXR 1000. Do you have a good tune?
I have a 2023 650 with this exhaust, had to buy clamps off of amazon to actually make it seal and stay on. Huge oversight by delkevic IMO
@jessusacurlee6610
2 ай бұрын
What clamps did you buy having the same problem
My wife owns same bike. Very interesting
Do you guys do ECU flashing just to get a stock set up to run better? I have a 650 and alot of on and off throttle jerking
I got my 2023 ninja 650 flashed a while back, should I go back in and cover the pair valve?
That almost sounds as good as my childhood 1970's Schwinn did with the card's in the spokes. 😂
@180FiftyFive
4 ай бұрын
😂
Sounds like my old 4 wheeler
Would you be willing to work on a 2024 Honda fury.
Have same bike . I have a hindle megaphone. Want a Ecu flash.
Does anyone know if you can fit these ninja exhausts on a vulcan? The aftermarket support for the ninjas are just better and I'm not sure why cause they run the same motor
If i buy a tune will that get me entrys into the giveaway
Can the 2nd throttle plate be tuned?
Does a flash void the warranty?
Have 2023 ninja 650 with hindle megaphone full system.
Hi mate been watching your vids for a while now and wondering if you could help me out? Im in Scotland have just built me another 5VY R1 track bike and on the back wheel im feeling like its resisting a bit when i spin it freehand. Ive recheched all my torque tubes etc with micrometers and it all checks out, its on new bearings and they got rechecked too and all minted. I've only gave the floating tube and all the rest of the assembly a light glove smeared coating of my bearing grease and the bearings themselves got just enough as i wanted to keep the greasing light as its obviously going to be getting taken off a lot and inspected a lot now. I just feel like its not as free moving as it used to be and thats without the chain on it and brake caliper on it so no drivetrain loss at all. Its not "hard to move" per say but if i give it a good hard push i get just over 1 rotation of the wheel and with all the chain and brakes fitted id be lucky to get one full rotation unless i really push the tyre hard. Would you say this is a problem or am i just paranoid and because quite a lot of the assembly and the grease is all new that its likely to be tight. Can post a vid of it.
@derrickbasenberg811
3 ай бұрын
I would go with deferent bearings can get bad brand new stuff if you can afford it get the ceramic bearings
Chris, what happened to zx6 you were trying to blow up? Should see how much nitrous it will hold. 😂
@TeamMooreMafia
4 ай бұрын
It's still sitting in the corner.
everything is fine but i think now it's time for Kawasaki to make this Ninja 650 a little bit more aggressive and track friendly.... just a lill bit....
@elonmust7470
2 ай бұрын
Nobody wants that, they want a lot more than a little bit. AKA 6r......
@1pyroace1
2 ай бұрын
Ride by wire?
@jerodwolford2743
27 күн бұрын
@@elonmust7470 nah kawasaki needs to turn the 650 into an r7 and gsx8r killer. Everybody's going to middle weight p twins and kawasakis had the same exact engine in the 650 since they first came out with little to no updates. It's time to update the nearly 20 year old engine
CM$🤙🏾🙏🏾✌🏾
Will flashing the ECU void the factory warranty? I just bought a 2024 650 hence the question.
@1pyroace1
2 ай бұрын
More likely
Change your camera position . Can't see the new display during runs .
@TeamMooreMafia
4 ай бұрын
I'll try to switch it around and see what you guys like best.
I have a delkevic exhaust 😆
Would a bone stock z650 ecu be worth getting the ecu reflashed ?
@TeamMooreMafia
4 ай бұрын
It smooths it out a ton no matter what mods you have.
@TRAIL325
4 ай бұрын
@@TeamMooreMafia appreciate it!
I got a 09 flashed
@1pyroace1
2 ай бұрын
What’s your top speed
I was gonna have moore mafia tune a 2017 650 but glad I didn't thought I would of got more power but not much more n the engine break hits to hard
@TeamMooreMafia
4 ай бұрын
It's a very noticeable difference on that bike.
@BrianSmith-oy3eq
4 ай бұрын
@@TeamMooreMafia I got a question about tuning a 98 Honda shadow cruiser
isn't it supposed to make 67 hp ? why was it making 58?
@moore mafia I want to bring my 24 ninja 650 to you I’ll be coming from Long Island ny gonna have akropovic full titanium race exhaust velocity stacks dna air filter pair valve block and o2 delete
@stephenbone9929
3 ай бұрын
who makes your velocity stack?
@elonmust7470
2 ай бұрын
Jesus Christ juuuust buy a damned supersport.
Delkavic are rubbish exhausts. A good but affordable exhausts for these things has to be leovince. They also have a resonator which makes it sound less raspy. Got one on my Z650 and while these engine don't sound the best, leovince pipes do make them sound fairly nice.
@GMdrivingMOPARguy
4 ай бұрын
Delkavic makes exhaust for a lot of older bikes that you can't get from anyone else. They're a good company for that reason alone
My 86 250r made that much hp
Bought one of these 650's as a first street bike after only riding in dirt. Really lacking the power for most american roads... Switched to a Z900 in only 4 months....
@spartanx169x
4 ай бұрын
Ridiculous. Unless you weigh 250lbs+ or more.
@elonmust7470
2 ай бұрын
@@spartanx169xGo ride a 195whp liter bike & get back to us.......
That first pull sounded like absolute crap. I have a 2008 ninja 650 with a Delkevic I promise I can out run that thing. I love the way it sounds ,and just sayin mine has right at 78hp. I don't think that's a exhaust thing as much as it is a Kawi thing with all the new poop they do to the bikes.
@spartanx169x
4 ай бұрын
The older ones actually have more HP from the factory than the new ones.
Throttle is very jumpy
Lol, for a couple of buck more. $1000+ is not a couple of bucks more.
The new era of 2cyl 600s is sad. Sounds like my lawnmower and makes about the same power.
@romelabad4454
Ай бұрын
Big difference between 600s and 650s😂
Yeah Djokovic is definitely shity I bought one on my old Gixxer and when I put it on it ran worse I went back to my Yoshi
@KentRoads
4 ай бұрын
Djokovic the tennis guy?? 😂
@BigTree412
4 ай бұрын
@KentRoads here we go with the spelling shit .. hope off my dick ...
@BigTree412
3 ай бұрын
@@KentRoads 😂😂
@BigTree412
3 ай бұрын
@@KentRoads spelling police 🚨
*KZread has a porn bot problem😂*
@JESUSISCALLINGYOU7
4 ай бұрын
How does it work with those bots? KZread needs a legit Google account and manual input.
@KentRoads
4 ай бұрын
They need you, Jesus
@DMONEYlNDUSTRY
4 ай бұрын
@@JESUSISCALLINGYOU7 *I have no idea 😤💨👎🏻*
@exothermal.sprocket
4 ай бұрын
You guys don't understand how evil and corrupt Google is, and this is the main issue. They plaster channels with sex bots and censor free speech.
First 😂
@DMONEYlNDUSTRY
4 ай бұрын
*you're second*
Moped.
@spartanx169x
4 ай бұрын
Its more than fast enough to get you killed.
I literally have a lawnmower with more horsepower and alot more torque than that junkie girls bike
They sound horrible.
Not a fast bike. Looks fast but 65hp?? 😅
@exothermal.sprocket
4 ай бұрын
MT-07 with exhaust and Hordpower airbox makes nearly 78 horsepower. Also sounds much nicer.
@vvevvevvvv
4 ай бұрын
Plenty fast. Also very reliable.
@spartanx169x
4 ай бұрын
@@exothermal.sprocket The MT07 is trash in curves. Everybody that gets one has to upgrade the suspension on them because they bounce so much in curves. I also speak from experience in owning both. The only thing the MT07 is good for is wheelies.
@exothermal.sprocket
4 ай бұрын
@@spartanx169x Wasn't talking at all about the chassis or brakes or suspension. I was making a comparison between engines in the 650-690 class.
@elonmust7470
2 ай бұрын
@@vvevvevvvvIt's not fast.... It doesn't even have adjustable suspension.... Can't go fast without setup suspension...