Awesome video! I bought the Mtek flux helmet and exfog after watching your video! Last week i played a full day skirm and i totaly love this setup! Never had any fog on the glasses and the helmet is realy comfortable! Many thanks man!

Thanks man this is just what I needed to get my exfog set up

Nice comprehensive video thanks!

I have the sawfly ballistic eye pro. Its standard issue of the TA-50 in the US Army. Had them since I was serving. Always go to the real thing. It always makes a really good authentic look

also in case anyone is wondering YES you can use fast helmet covers it just takes some finicking to make them fit properly :)

Nice setup!

Great setup! I recommend upgrading your exfog unit to the pro version that came out. It’s a lot quieter and has a lot more power.

I really like that helmet cover.

Just to clarify, the amps from gentex also came with an mlok adapter that accepts the arms mount?

hi, so this kind of setup with the headset comms? as I am a paramotor pilot can I use this to speak to other pilots via radio? and can I use a blur-tooth as well for any phone calls?

Hi just wondering what kind of mount did you use for ur gopro?

and the m frame u linked are not tinted

Stiff and hard that close to your face? Airsofters, man... good vid btw

@Mechjeb661

2 жыл бұрын

kzread.info/dash/bejne/f6Sf1diLdrOwYLA.html

I'm looking to buy the MTEK FLUX helmet but I've looked at several websites and noticed there are no size options. so is this helmet just one size overall ?

@JDAM-ACTUAL

11 ай бұрын

From the looks of it Yes, I have a large size head, and I have plenty of room. I can also remove the padding if I need a little bit more room

Do you notice the noise of your exfog, Is it noticable for you or just barely noticable? does your gopro pick up on the sound of the fans?

@JDAM-ACTUAL

Жыл бұрын

Personally, it does not, but if it does pick it up, it's very, very low on the volume scale, and it doesn't interrupt the footage.

Hey love the setup. Do you have the link for the go pro mount and how do you like the AMP arms? Do you think you get enough compression on your ears?

@JDAM-ACTUAL

2 жыл бұрын

Hey, thanks for watching to answer your first question, yes, I just added the link for the go pro mount. And for the second question, it does give a good compression, but for real steel shooting, I would recommend the real steel head set!

@Meltedchair513

2 жыл бұрын

@@JDAM-ACTUAL awesome thanks so much!

I just ordered my EXFOG fan system. I really like your tube setup and I'm going to run mine about the same but for your action camera audio. What speed level does it pick up sound on your action camera? Does it pick any fan speed sound at all?

@JDAM-ACTUAL

2 жыл бұрын

No not at all

@COLLECTOR-Airsoft

2 жыл бұрын

@@JDAM-ACTUAL Thank you for the fast reply. That is awesome! I'm even more excited

@robrobusa

2 жыл бұрын

I am trying to set up my exfog with my "loose" oakley like glasses. How do you manage the tubes to get on the inside of your goggles without those tubes annoying you on your brows?

@JDAM-ACTUAL

2 жыл бұрын

Actually that's how I usually run them through my oakleys. If you want you can cut off a little bit off the end so they're not as annoying

Extremely clean setup! Absolutely in love with it, quick question, do you have (or had it you changed setup since) problems with the cheek weld of the mouth pro? Also, does it leave part of the nose exposed? (In other videos of you that i saw you were running a different mouth piece)

@JDAM-ACTUAL

Жыл бұрын

Yes I have i'm going to make an update video on the helmet set up. And yes, it does leave the nose exposed. But the gentleman who makes the face mask also makes models with nose protection.

@claudio6636

Жыл бұрын

@@JDAM-ACTUAL oh ok awesome!

Without the exfog do u still fog with the facemask?

@JDAM-ACTUAL

2 жыл бұрын

A little bit around the edge

Not sure why u can't find the tomahawk for the helmet. I've checked Amazon and evike. Git any ideas? Also love the set up. Working on my helmet setup as well

@JDAM-ACTUAL

Жыл бұрын

Let me look into it

@highly_amused_asps4351

Жыл бұрын

@@JDAM-ACTUAL appreciate it

Did the amp arm need an adapter to be attached to the helmet

@JDAM-ACTUAL

2 жыл бұрын

Great question, when I ordered the AMP, Arm came with a little attachment to be installed on the helmet

@shauntichenor8831

2 жыл бұрын

@@JDAM-ACTUAL welp I’m sold

@JDAM-ACTUAL

2 жыл бұрын

if you have any other questions, please feel free to reach out to me

How is the sizing on this helmet my head is a 7 5/8

@JDAM-ACTUAL

Жыл бұрын

I would try going for a large size

Will the helmet fit someone like a teenager? I’d really like to get this but it doesn’t specify the exact sizes.

@JDAM-ACTUAL

2 жыл бұрын

My understanding that this is a one size fit most helmet it does come with extra pads in case there's a little bit more wiggle room and you can also remove the pads if you find it a little tight on the head

@ClapperAlien269

2 жыл бұрын

@@JDAM-ACTUAL Woah that was a fast response, thank you, earned a sub!

@JDAM-ACTUAL

2 жыл бұрын

Thanks for checking out the video if you have any other questions please feel free to reach out

How much that helmet weight brother?

@JDAM-ACTUAL

2 жыл бұрын

Not a whole lot, maybe half a pound! it's definitely a very thick, sturdy helmet, but not a very heavy one

all the links are outdated

@JDAM-ACTUAL

2 жыл бұрын

Hey, thanks for the update, didn't realize the links are bad I fixed them! let me know if anything else doesn't seem to be working

Nice bro are you on Instagram?

@JDAM-ACTUAL

2 жыл бұрын

Yes @JDAM_Airsoft