I installed the Pindicators from Morimoto on the rear of the Honda ADV150 for improving the chance of other drivers seeing me.
Жүктеу.....
Пікірлер: 18
@ThrillMouseMoto2 жыл бұрын
Powerful little guys! 💡💡👌😎
@baller44213 Жыл бұрын
Thanks for sharing nice upgrade.
@bubber252 жыл бұрын
thats pretty cool. was the wiring difficult? it looks so clean
@ExcelsiorDDZ
2 жыл бұрын
The hardest part was figuring what was what without a wiring diagram. Using Posi-tap connected is a must on a motorcycle IMHO. Everything tucked in well and the only thing I had to add was a spacer on the inside threads to give me enough room to snake the wires in through the license plate holes.
@KevinHernandez-vh9dl2 жыл бұрын
Nice 👍
@supreme122 жыл бұрын
Looks good but I can't ride at night
@Trekopolis2 жыл бұрын
I like these! So where do you connect the leads? I'm assuming? ...to the back turn indicator wires. Or do you know if there are any directions online or somewhere else? I'm not familiar with electronics and never have been. Just something I never got into, but it can't be that difficult. You should do another video on actually installing them! :) Unless it's so simple I just don't know it. ha
@ExcelsiorDDZ
2 жыл бұрын
the pindicators have 3 wires. Ground/On/Bright. I tapped into the license plate light for the ON and each turn signal hot and ground for the BRIGHT. I highly recommend posi-tap connectors over all else on motorcycle applications.
@ravenneo64662 жыл бұрын
You might want to get the yoshimura fender eliminator kit, it makes it look nicer then the long stock one that Honda puts on there bikes.
@ExcelsiorDDZ
2 жыл бұрын
Thanks. I'm familiar with their items. But as its a purely cosmetic change, it's near the bottom of my shopping list. And I gotta be not riding in order to do upgrades. 😁
@paul5683
2 жыл бұрын
I totally agree. To me that seems a waste of money unless you are planning on doing wheelies. The fender is there to keep you clean.
@raymundo6702 жыл бұрын
Looks Great. Any idea where you could get a set of red ones for the back vs amber? It doesn't look like Morimoto makes Red ones
@ExcelsiorDDZ
2 жыл бұрын
I'm not sure of that. I would check the Shopee sites from the east to see if anyone even makes one. I'm pretty sure they don't in the USA due to road laws.
@raymundo670
2 жыл бұрын
@@ExcelsiorDDZ I thought the front markers are amber and the rear are red in the US? The reflectors on my Honda are amber in front and red in the rear. Seems odd to me to have amber in the rear. It looks good on your video for sure but if I had the option of Red I would prefer that.
@ExcelsiorDDZ
2 жыл бұрын
@@raymundo670 I can really only quote the turn signal law for Texas, this may vary in other places. "White of amber in the front, red or amber in the back" (Texas Transportation Code 547.324)
@ExcelsiorDDZ
2 жыл бұрын
@@raymundo670 A quick search and I'm not really seeing an option. But Yoshimura looks decent on my quick peek, no red though.
Пікірлер: 18
Powerful little guys! 💡💡👌😎
Thanks for sharing nice upgrade.
thats pretty cool. was the wiring difficult? it looks so clean
@ExcelsiorDDZ
2 жыл бұрын
The hardest part was figuring what was what without a wiring diagram. Using Posi-tap connected is a must on a motorcycle IMHO. Everything tucked in well and the only thing I had to add was a spacer on the inside threads to give me enough room to snake the wires in through the license plate holes.
Nice 👍
Looks good but I can't ride at night
I like these! So where do you connect the leads? I'm assuming? ...to the back turn indicator wires. Or do you know if there are any directions online or somewhere else? I'm not familiar with electronics and never have been. Just something I never got into, but it can't be that difficult. You should do another video on actually installing them! :) Unless it's so simple I just don't know it. ha
@ExcelsiorDDZ
2 жыл бұрын
the pindicators have 3 wires. Ground/On/Bright. I tapped into the license plate light for the ON and each turn signal hot and ground for the BRIGHT. I highly recommend posi-tap connectors over all else on motorcycle applications.
You might want to get the yoshimura fender eliminator kit, it makes it look nicer then the long stock one that Honda puts on there bikes.
@ExcelsiorDDZ
2 жыл бұрын
Thanks. I'm familiar with their items. But as its a purely cosmetic change, it's near the bottom of my shopping list. And I gotta be not riding in order to do upgrades. 😁
@paul5683
2 жыл бұрын
I totally agree. To me that seems a waste of money unless you are planning on doing wheelies. The fender is there to keep you clean.
Looks Great. Any idea where you could get a set of red ones for the back vs amber? It doesn't look like Morimoto makes Red ones
@ExcelsiorDDZ
2 жыл бұрын
I'm not sure of that. I would check the Shopee sites from the east to see if anyone even makes one. I'm pretty sure they don't in the USA due to road laws.
@raymundo670
2 жыл бұрын
@@ExcelsiorDDZ I thought the front markers are amber and the rear are red in the US? The reflectors on my Honda are amber in front and red in the rear. Seems odd to me to have amber in the rear. It looks good on your video for sure but if I had the option of Red I would prefer that.
@ExcelsiorDDZ
2 жыл бұрын
@@raymundo670 I can really only quote the turn signal law for Texas, this may vary in other places. "White of amber in the front, red or amber in the back" (Texas Transportation Code 547.324)
@ExcelsiorDDZ
2 жыл бұрын
@@raymundo670 A quick search and I'm not really seeing an option. But Yoshimura looks decent on my quick peek, no red though.
They look great! Do you have a link for those?
@ExcelsiorDDZ
Жыл бұрын
www.theretrofitsource.com/morimoto-pindicators-MC-PIN?quantity=1