The additional screening looks good and works great! Well done.
@Daniel_Size_12 Жыл бұрын
Appreciate the candid video. Always best to se an honest evaluation.
@troy9er Жыл бұрын
👍🏻 thanks for sharing. I looked at the Ryker, loved the Rally. Ended up with a 2021 Spyder. Found one slightly used (705 miles). It’s just like new. The original owner traded it for a touring/ Limited model. He and his wife wanted something they could tour on.
@endeavortrikes Жыл бұрын
I have over 500k on reverse trike and am a design engineer so my opinions. Just an FYI that screening will restrict a minimum of 60% air flow. I would remove all the screening and install simple window screen in front of the radiator as that will only restrict 5-8% also the shock adjustment does not stiffen or soften the ride it only changes the ride height. I am well aware of CanAm and specs etc and one of the things of issue is poor tire wear mainly due to over pressure. I know CanAm recommends 28 rear 24 front I would go 20 rear 16 -17 front for best wear plus it will improve handling.
@JD-qd1bp Жыл бұрын
Really good tips thank you, looking to buy a Ryker over the pond in the UK, it’s a bit more difficult buying accessories here as ownership is very limited (I’ve never seen one on the road here!) so it’s even more important to buy the right parts in the first place before shipping to the UK. Thank you for your video and your time sir.
@TOWIIBRAVO
Жыл бұрын
Thanks for watching. I have several newer videos out. The Ryker has been a blast so far. No issues at all.
@xGRASHOPAx11 ай бұрын
the grill plates look great. I bought one that has a clover type pattern on it from Lowes or Home Depot and Installed it on my Scion xB that had a Japanese Body kit and the front bumper was just a wide open mouth. I agree with you on getting something with bigger holes for the intakes too. I was trying to figure out what that thing was on the back of your seat the whole video till you said. I thought it was a police baton lol.
@timmcnulty3795 Жыл бұрын
In Europe we have day time running light pods on either side of the body. I believe you can buy them as accessories
@ROTAX1 Жыл бұрын
Hey Tow I I…my wife and I have two of these…get the end links and the sway bar…on the interstate…70 75 straight as an arrow…I think they install a squirrel at the factory this completely illuminates that feel. Happy riding
@robertsalyers1351
Жыл бұрын
What would that cost to do ?? I'm looking at a gently used Ryker and on the test drive it seems to wiggle back then you adjust while riding then it wiggle back the other direction...I'm used to riding a bike
@ROTAX1
Жыл бұрын
@@robertsalyers1351 hello Robert…if I recall the sway bar is a couple of hundred or less and if you are somewhat mechanical you can do it yourself. The end links are not much and you would be doing those at the same time. There are several tutorials on you tube. The difference is night and day and really firms up the ride. In my opinion, it is a must. I don’t know why Can-Am does not just install the better sway bar from the factory. have a great day.
@robertsalyers1351
Жыл бұрын
@@ROTAX1 very nice, thanks for the reply
@dasshape00 Жыл бұрын
Screen looks great
@brentgath4447 Жыл бұрын
Looking good! I should have mine this week (fingers crossed).
@VinCode17
Жыл бұрын
Nice bro #vincode17
@jiggarichardson9638
Жыл бұрын
I’m waiting on mines too been waiting since early July 🤦🏾♂️ I got a rally tho
@VinCode17
Жыл бұрын
@@jiggarichardson9638 when do you expect to have yours #vincode17
@jiggarichardson9638
Жыл бұрын
@@VinCode17 they told me no later than mid, end of August
@VinCode17
Жыл бұрын
@@jiggarichardson9638 Dame summer will be over by then.
@jiggarichardson9638 Жыл бұрын
I’m still waiting for that rally bravo it’s mid August I been waiting since early July 🤦🏾♂️ they said I’m 1st on the list BUT time is flying 🤦🏾♂️ I at least want a few rides out of it
@MetalDetectoristMick Жыл бұрын
I like that screen. Where did you get that? And whats its called?
@jacksongil9123 Жыл бұрын
How much maintenance if you take them the dealership?
@stuwest5862 Жыл бұрын
The screen you added reduces airflow by 50%. Nice work.
@servantsoldier5207 Жыл бұрын
Where’s your cruise control for your ‘22 Ryker?
@jameswood9628 Жыл бұрын
Hey T2B, what model Air Hawk seat fits the Ryker? It looks like a great fit
@TOWIIBRAVO
Жыл бұрын
Large cruiser
@genegoodwin8925 Жыл бұрын
We just bought a Ryker for our son and I do not like the radiator being so unprotected. I like the screen you installed on yours. What is that kind of screen called and where can I purchase some of it? Thanks for sharing.
@TOWIIBRAVO
Жыл бұрын
Home Depot. It was on an End Cap by lumber. Around 12 to 15 dollars.
@genegoodwin8925
Жыл бұрын
@@TOWIIBRAVO Thanks, I'll buy some for our son's Ryker, And if I ever trade for one I'll buy some for it too. Thanks again.
@ChrisEpler Жыл бұрын
Hey classmate! Found ya! :) Hope the kitchen situation is OK!
@TOWIIBRAVO
Жыл бұрын
Thanks it’s a process. When you get your Ryker let me know. We can plan a ride.
@ChrisEpler
Жыл бұрын
@@TOWIIBRAVO Working on convincing the wife on an RT Limited or F3 Limited...Won't be until next year at least.
@kokobean240 Жыл бұрын
How did you affix the additional screen protection for the radiator?
@TOWIIBRAVO
Жыл бұрын
Gorilla tape and zip ties.
@kaitanic Жыл бұрын
Man u just solved a problem in the beginning of the video.....u seriously sitting on a great idea!!!
@lakepowellfishing Жыл бұрын
Good video poor to hear on volume on hi but still good !.
@StarknightMT_official Жыл бұрын
hello, Are you interested in testing products? We would like to test a cover fo rRyker 900
@felixwilliams886510 ай бұрын
By any chance are you a TOW missile system guy also?
@TOWIIBRAVO
10 ай бұрын
Yes. 11h ARMY.
@felixwilliams8865
10 ай бұрын
27E MOS and Ryker rider also. @@TOWIIBRAVO
@ryker4124 Жыл бұрын
Where in Western PA? I'm in Pittsburgh (Carrick).
@jacquespage888 Жыл бұрын
i was suppose to buy one i talk too three mecanic everyone told me dont touch that jacques to many issue and after 700 klm the fisrt issue i would have to change the brake pads all around for me it a peace of problem the plastic very sheep hard on gaz about 30 mille gallon
@thomasnappo630911 ай бұрын
Less is more..😊
@briangodek1989 Жыл бұрын
Please don't ride with your bright lights on...it's very annoying when you are behind me and your bright light is reflecting into my side mirrors.
@TOWIIBRAVO
Жыл бұрын
That’s the point. I want you to see me.
@TgrHwke
Жыл бұрын
@@TOWIIBRAVO Wanting to be clearly seen by others drivers is a good thing. I've added extra lights to the front and rear of my motorcycle for that very reason. Just understand that by using your high beam lights that you are also creating a hazard for other drivers. Most states, including PA, have laws requiring you to dim your lights when within 500 feet of another vehicle. So you would need to be constantly turning your high beams on and off to comply. If you don't want to install additional lights, another option is you can install a switched modulator that will flash your headlights during the day to make them more noticeable to other drivers without making them brighter and blinding others.
@robertsalyers1351
Жыл бұрын
Boo hoo...LMAO
@MrN1NNO
17 күн бұрын
I have also driven with high beams during daytime, car, or motorcycle so that I'm seen
Пікірлер: 54
The additional screening looks good and works great! Well done.
Appreciate the candid video. Always best to se an honest evaluation.
👍🏻 thanks for sharing. I looked at the Ryker, loved the Rally. Ended up with a 2021 Spyder. Found one slightly used (705 miles). It’s just like new. The original owner traded it for a touring/ Limited model. He and his wife wanted something they could tour on.
I have over 500k on reverse trike and am a design engineer so my opinions. Just an FYI that screening will restrict a minimum of 60% air flow. I would remove all the screening and install simple window screen in front of the radiator as that will only restrict 5-8% also the shock adjustment does not stiffen or soften the ride it only changes the ride height. I am well aware of CanAm and specs etc and one of the things of issue is poor tire wear mainly due to over pressure. I know CanAm recommends 28 rear 24 front I would go 20 rear 16 -17 front for best wear plus it will improve handling.
Really good tips thank you, looking to buy a Ryker over the pond in the UK, it’s a bit more difficult buying accessories here as ownership is very limited (I’ve never seen one on the road here!) so it’s even more important to buy the right parts in the first place before shipping to the UK. Thank you for your video and your time sir.
@TOWIIBRAVO
Жыл бұрын
Thanks for watching. I have several newer videos out. The Ryker has been a blast so far. No issues at all.
the grill plates look great. I bought one that has a clover type pattern on it from Lowes or Home Depot and Installed it on my Scion xB that had a Japanese Body kit and the front bumper was just a wide open mouth. I agree with you on getting something with bigger holes for the intakes too. I was trying to figure out what that thing was on the back of your seat the whole video till you said. I thought it was a police baton lol.
In Europe we have day time running light pods on either side of the body. I believe you can buy them as accessories
Hey Tow I I…my wife and I have two of these…get the end links and the sway bar…on the interstate…70 75 straight as an arrow…I think they install a squirrel at the factory this completely illuminates that feel. Happy riding
@robertsalyers1351
Жыл бұрын
What would that cost to do ?? I'm looking at a gently used Ryker and on the test drive it seems to wiggle back then you adjust while riding then it wiggle back the other direction...I'm used to riding a bike
@ROTAX1
Жыл бұрын
@@robertsalyers1351 hello Robert…if I recall the sway bar is a couple of hundred or less and if you are somewhat mechanical you can do it yourself. The end links are not much and you would be doing those at the same time. There are several tutorials on you tube. The difference is night and day and really firms up the ride. In my opinion, it is a must. I don’t know why Can-Am does not just install the better sway bar from the factory. have a great day.
@robertsalyers1351
Жыл бұрын
@@ROTAX1 very nice, thanks for the reply
Screen looks great
Looking good! I should have mine this week (fingers crossed).
@VinCode17
Жыл бұрын
Nice bro #vincode17
@jiggarichardson9638
Жыл бұрын
I’m waiting on mines too been waiting since early July 🤦🏾♂️ I got a rally tho
@VinCode17
Жыл бұрын
@@jiggarichardson9638 when do you expect to have yours #vincode17
@jiggarichardson9638
Жыл бұрын
@@VinCode17 they told me no later than mid, end of August
@VinCode17
Жыл бұрын
@@jiggarichardson9638 Dame summer will be over by then.
I’m still waiting for that rally bravo it’s mid August I been waiting since early July 🤦🏾♂️ they said I’m 1st on the list BUT time is flying 🤦🏾♂️ I at least want a few rides out of it
I like that screen. Where did you get that? And whats its called?
How much maintenance if you take them the dealership?
The screen you added reduces airflow by 50%. Nice work.
Where’s your cruise control for your ‘22 Ryker?
Hey T2B, what model Air Hawk seat fits the Ryker? It looks like a great fit
@TOWIIBRAVO
Жыл бұрын
Large cruiser
We just bought a Ryker for our son and I do not like the radiator being so unprotected. I like the screen you installed on yours. What is that kind of screen called and where can I purchase some of it? Thanks for sharing.
@TOWIIBRAVO
Жыл бұрын
Home Depot. It was on an End Cap by lumber. Around 12 to 15 dollars.
@genegoodwin8925
Жыл бұрын
@@TOWIIBRAVO Thanks, I'll buy some for our son's Ryker, And if I ever trade for one I'll buy some for it too. Thanks again.
Hey classmate! Found ya! :) Hope the kitchen situation is OK!
@TOWIIBRAVO
Жыл бұрын
Thanks it’s a process. When you get your Ryker let me know. We can plan a ride.
@ChrisEpler
Жыл бұрын
@@TOWIIBRAVO Working on convincing the wife on an RT Limited or F3 Limited...Won't be until next year at least.
How did you affix the additional screen protection for the radiator?
@TOWIIBRAVO
Жыл бұрын
Gorilla tape and zip ties.
Man u just solved a problem in the beginning of the video.....u seriously sitting on a great idea!!!
Good video poor to hear on volume on hi but still good !.
hello, Are you interested in testing products? We would like to test a cover fo rRyker 900
By any chance are you a TOW missile system guy also?
@TOWIIBRAVO
10 ай бұрын
Yes. 11h ARMY.
@felixwilliams8865
10 ай бұрын
27E MOS and Ryker rider also. @@TOWIIBRAVO
Where in Western PA? I'm in Pittsburgh (Carrick).
i was suppose to buy one i talk too three mecanic everyone told me dont touch that jacques to many issue and after 700 klm the fisrt issue i would have to change the brake pads all around for me it a peace of problem the plastic very sheep hard on gaz about 30 mille gallon
Less is more..😊
Please don't ride with your bright lights on...it's very annoying when you are behind me and your bright light is reflecting into my side mirrors.
@TOWIIBRAVO
Жыл бұрын
That’s the point. I want you to see me.
@TgrHwke
Жыл бұрын
@@TOWIIBRAVO Wanting to be clearly seen by others drivers is a good thing. I've added extra lights to the front and rear of my motorcycle for that very reason. Just understand that by using your high beam lights that you are also creating a hazard for other drivers. Most states, including PA, have laws requiring you to dim your lights when within 500 feet of another vehicle. So you would need to be constantly turning your high beams on and off to comply. If you don't want to install additional lights, another option is you can install a switched modulator that will flash your headlights during the day to make them more noticeable to other drivers without making them brighter and blinding others.
@robertsalyers1351
Жыл бұрын
Boo hoo...LMAO
@MrN1NNO
17 күн бұрын
I have also driven with high beams during daytime, car, or motorcycle so that I'm seen