2022 BMW S1000R Gilles Rearset Install
Автокөліктер мен көлік құралдары
👍 Please SMASH that like button - this helps us out a TON! Thank you! 🙏
🛑 Don't forget to subscribe: kzread.info?sub_c...
🔔 Ring the bell for notification!
👉 Check out our equipment, gear, and other cool stuff in our videos: kit.co/CaliMotoTV
Cali Moto TV, the moto channel that has it all. As long as it’s got an engine and wheels, we’ll drive, we’ll ride it, we will tinker on it and we will be sure to share our experiences with you. Regardless if you’re a two or four-wheel fan, diesel, or gasoline enthusiast, we got you covered.
Hungry for more? Follow us on social media:
/ calimototv
/ calimototv
Пікірлер: 53
i really like the fact that you giving us the torque spec for all the bolts etc.. really helpful when it comes to do some DIY work at home and have your videos playing, Thank you very much 👍
Great video very detailed nice work
Dude scratched his frame fitting rearsets! Damn... thats bad man.
Wrenching and riding what's not to like,, just fitted Michelin power 5 on the 06 gsxr 1000 I've bought,, as the roads here in November are no good for the sc2 corsa it came with,, another great set of videos coming our way ☘️☘️☘️☘️☘️☘️rear sets look awesome ☘️☘️☘️from Northern Ireland greatly appreciated
@CaliMotoTV
2 жыл бұрын
Nice! Be safe out there!
Great Vid! I have the M Package rear sets on my s1kr that I love! Fully adjustable. I like the lowest setting being 6+ft.
@CaliMotoTV
2 жыл бұрын
Perfect!
I installed these identical rearsets on my 2020 rr. The two mounting holes on each end of the shift lever (where the quickshifter connects) vary the amount of pull or push required on the quickshifter when you change gears. You'll notice there is an engraving near each hole. On the GP shift end, you will see RS and RF (reverse slow and reverse fast) and on the normal shift end just S and F (slow and fast). I've connected mine to the RF hole so I have a short throw GP shift.
@CaliMotoTV
2 жыл бұрын
👌👌👌
Very nice
@CaliMotoTV
2 жыл бұрын
✌️✌️✌️
Really like the rearsets
@CaliMotoTV
2 жыл бұрын
👌
Gilles are really good! Got them on 2 of my bikes. Very grippy and can be used as a murder weapon. If you walk around the bike with shorts be VERY careful.
@CaliMotoTV
2 жыл бұрын
😂😂😂👌 Noted
So if the single R can fit the double R can it be vise versa? can i get lower pegs for the RR
I want to get the Gilles rearsets for my Streetfighter.
@CaliMotoTV
2 жыл бұрын
👌 👌 👌
Can you post the tightening torque table for the 2022 s1000r.
@CaliMotoTV
2 жыл бұрын
Please email us at calimototv@gmail.com
Can you adjust the brake lever. My stock lever makes my shins tired.
@CaliMotoTV
2 жыл бұрын
Yea. 95% of your braking should happen with the front brake.
Instead of changing the spring you can purchase the bracket for the new generation of RR. It's less than $10 if I remember correctly.
@CaliMotoTV
2 жыл бұрын
🤔
@josey1972
2 жыл бұрын
@@CaliMotoTV 😎
@Dixie866
2 жыл бұрын
I just shortened the stock spring by about an 1", works great and retains the dirt guard
@PedroSantos-sg9gz
5 ай бұрын
@@Dixie866how did you do that?
@Dixie866
5 ай бұрын
Just cut the long end down then bend a hook into it@@PedroSantos-sg9gz
Hi Bill, when is this puppy going on the dyno?
@CaliMotoTV
2 жыл бұрын
Still working on it
I had these fitted on my 22 plate R, they don’t fit properly. If looked on from above they didn’t come out at 90 degrees to the bike and they were slightly pointing downwards. Looked trick but didn’t feel right. I would wait until Gilles do a specific set for the single R.
@CaliMotoTV
2 жыл бұрын
Ours fit properly.
@vinceconn1935
2 жыл бұрын
@@CaliMotoTV I would like to see a view from directly above if possible and from the rear.
@Dixie866
2 жыл бұрын
Vince is correct, they don't point a true 90 degrees off the bike. I just installed these on my 22 S1000R and they are tilted forwards by a degree or two. I ride with my feet pointing outwards so it's not a big deal since my feet aren't square to the bike regardless, but they are definitely not a 100% perfect fit. I'm indifferent towards the very slight angle so I would say it's 98% perfect. I'm guessing the RR uses a slightly different rear section of the frame If you stand over the bike and look down, you'll notice they have a very slight forward tilt edit: Also, the exhaust mounting point is also further out so if you turn the stock muffler to mate to it, it will be rotated at a weird outward angle. Not the end of the world
What year RR are these? They look great
@CaliMotoTV
5 ай бұрын
2022
@PedroSantos-sg9gz
5 ай бұрын
@@CaliMotoTV thank you!
where can i buy these for this bike?? not having much luck xD
@CaliMotoTV
2 жыл бұрын
Check with www.motomillion.com
Is it more comfortable for long rides now?
@CaliMotoTV
2 жыл бұрын
No, we moved the rear sets up for more aggressive riding style.
@AlanTrades
2 жыл бұрын
@@CaliMotoTV how does it help with comfort, is it more or less comfortable now with the rear set
Where can I buy that bike lift brotha?
@kembong408
2 жыл бұрын
Same here…tired of swimming around on the floor
@CaliMotoTV
2 жыл бұрын
This is a direct lift motorcycle lift, see who supplies them where you're from. (Google). More simple and cheaper option is a motorcycle lift from harbor freight.
Aonde você comprou essa pedaleira? Qual site?
@CaliMotoTV
2 жыл бұрын
?
@motoevida1000
2 жыл бұрын
@@CaliMotoTV qual site você comprou essa peça do vídeo?
Get those Stone Age wheels off 🤣 I’m most interested in how differently it rides with some light weights on 👊✊️✊️
@CaliMotoTV
2 жыл бұрын
👌
I will buy gilles mue2 rearsets for s1000r and will use them on s1000rr 23 😅🤣😂
Don't Try this at home !
@CaliMotoTV
2 жыл бұрын
🤔