Just bought a 2021 Kawasaki Brute Force 300. I also discovered your channel and really appreciate the detail you give in your videos. A lot of other “how to” videos are little more than before and after, so I thank you for the “how” and especially the “why” of the processes.

@thestuffwedowithron1768

Жыл бұрын

Welcome aboard! Thanks for the feedback. it helps me decide how to go forward with future videos. I have a few more planned on the 300 maintenance once the snow clears.

Bought my first ATV and going through all the one month steps. First time changing oil on any engine and your video make it so much easier than I expected. Gonna watch the rest of your videos for the rest of the steps. Thanks for making them!

@thestuffwedowithron1768

2 жыл бұрын

Glad it helped!

I just switched from polaris to Kawasaki. I didn't realize the 300 didn't have an oil filter until i had already bought it. You did a great job on this video man. Thanks

@thestuffwedowithron1768

Жыл бұрын

it's a bit common for these smaller motors to not have a filter. I had a Honda 200M trike and a Honda 250R trike. neither had a oil filter and served me well for a lot of hard miles. just means regular maintenance is that much more important. and a flush may be needed if the new oil is getting dirty right away after a change. However my Kawasaki 300 Lakota had an oil filter, and i would prefer if this brute did. But the machine size was just the right one for my kiddo's next machine before going to something too big.

Thank you very much for your time. Ready to try this now because of you.

@thestuffwedowithron1768

2 жыл бұрын

Thank you. That's great, ride hard.

Thank you. Great job explaining everything. Gonna go do mine right now. Was a bit nervous about it till now.. Looks like a cinch.

@thestuffwedowithron1768

2 жыл бұрын

Glad it helped

Thank you, very well explained and great video. This helped a lot.

@thestuffwedowithron1768

Жыл бұрын

Great to hear!

Thank you!!! Very helpful videos for starting my maintenance. I recently bougth a brut force. I am in Argentina. I tested an d compared with an Honda TRX420 in beach dunes, It´s far behind the Honda in performance climbing the dunes.

Appreciate the info good job

@thestuffwedowithron1768

2 жыл бұрын

Thank you for watching.

Great video. Thank you Sir.

@thestuffwedowithron1768

2 жыл бұрын

Glad you liked it!

Great video man. Way to be extra careful with everything maintenance involved. I do the same with my bike and especially my kids and wife’s bikes. Keep up the good work

@thestuffwedowithron1768

2 жыл бұрын

Thanks, Maintenance will keep them going. My Wife still rides a 98 Kawasaki Prairie that fires up first kick.

Can you do a spark plug change & brake pad change when needed?

Terrific video and narration on the proper way to do this service. I've seen vids where only the screen plug was removed for drainage. Did you get any additional oil when you removed yours, couldn't tell with my phone. My 1st service is pending on my 22' Bravo & thanks!

@thestuffwedowithron1768

Жыл бұрын

I didn't get much at all. just what was caught in the plug and screen basically. but pulling that screen and cleaning it is the best chance of catching any early signs of critical damage as it will catch the larger shavings. just pulling the screen for a oil change may not give a full drain either. you also wouldn't have the benefit of checking the magnet on the drain plug. so I do recommend pulling both at each oil change.

@robrarker

Жыл бұрын

@@thestuffwedowithron1768 Can't argue with logic lol, thanks for your input!

Very helpful!! Couldn’t you use the opener for the screen to drain the oil?

@thestuffwedowithron1768

2 жыл бұрын

I haven't been able to find a reliable image of the crank case covers but my guess is you would possibly get mosy but not all the oil out from the screen plug. Therefore possibly not get a complete drain.

I have an exact same 4 wheeler and just did an oil change your video helped a lot. Everything went good until a few days after and I can't see the line where the oil is any more there isn't any oil underneath on the floor either. Any tips

@thestuffwedowithron1768

Жыл бұрын

Assuming it hasn't been lost by leak or blowby. When the oil is very clean if it's over full than the parts behind the glass will look slightly golden. If it's low than you will see it looks more silvery. The bikes don't take a lot of oil so even just a little sideways lean can make the oil level look low or high. So lift each side of the atv and see if you can see the oil line at that time. If it's too high, lift the right side (side with the glass). If it's low lift the left side.

Great video with detailed explanation. Did you do valve adjustment after break in period ?

@thestuffwedowithron1768

Жыл бұрын

I haven't yet. it's going to be part of the winter maintenance this year. Along with a coolant flush. The coolant flush is more because the manual states the coolant is mixed light and is good for about -15c. so luckily we didn't crack something last winter as we hit as low as -40ish. So new coolant at a richer mix is a must for my climate.

@wagenpitstop7908

Жыл бұрын

@@thestuffwedowithron1768 Make a video about it if you can.

Hi guys just doing a oil change and I pulled the oil plug, all good there but just attempted to pull screen plug but quite bit harder to release the bolt , any tips out there???

@thestuffwedowithron1768

2 жыл бұрын

It really shouldn't be much tighter. But in order to reduce the possibility of slipping and stripping the hex side. Use a 6 point socket. Not a multy point socket. And support the head of the ratchet very well. Use the shortest socket/extension combination you can. And just double check the ratchet is set to counter clockwise.

Can regular or synthetic car 10w/40 be used ?

@thestuffwedowithron1768

2 жыл бұрын

To be honest, I used to use conventional auto oil all the time. but that was in old Honda trikes. like a Honda 200m and a Honda 250R. as well as a Kawasaki Lakota 300. I never had issues through the life of each machine. And I'm pretty sure the oil in my 2005 Brute Force 650 is 10w30 synthetic auto oil right now. It is getting switched out to the 4T JASO MA2 for this season and going forward. And as I ride year round I would swap the viscosities based off the current temperature extremes I would be riding in based off a viscosity chart. But as oils have progressed and advanced I'm moving more to using the recommended oils like the 4T JASO MA2 oil that Kawasaki recommends. I can't publicly recommend you use auto oil as it would definitely be best to follow manufacturers recommendations and would also be required for warrantee purposes, I assume. This is just an account of my personal experiences with this.

How much oil

@thestuffwedowithron1768

2 жыл бұрын

A change uses 1.6 liter or 1.69 qrt.

Did I miss the oil filter part?

@thestuffwedowithron1768

2 жыл бұрын

The 300 doesn't have a filter. Just the pre-screen to remove large particles. That makes it important to keep up on the oil changes and clean that pre-screen each time. The larger brutes have a filter (600-700cc).

Good God you are paranoid. Torque wrenches CAN'T overnighten if you set them. Just turn as fast as you want til it clicks.

@chrisweaver2143

2 жыл бұрын

Always has to be a hater ! Meanwhile while what are you doing to help others?

@bikes7777

2 жыл бұрын

@@chrisweaver2143 tons I swim with whales, donate billions to blind gay Arabs, volunteer in a cross dresser halfway house, and drive a prius. How about you BRUH?

@chrisweaver2143

2 жыл бұрын

@@bikes7777 that is AWSOME . I would focus on that .

@bikes7777

2 жыл бұрын

@@chrisweaver2143 nah my cheese making and toilet scrubbing business takes all my time.

New atv owner same as yours I have a question how do you get fuel in the reserve tank? Does it go in automatically?

@thestuffwedowithron1768

11 ай бұрын

The reserve is just the bottom inch or less of the tank. There are 2 pickups in the tank. The main pickup is higher in the tank so that any buildup of water and residue doesn't regularily get to the carb. This would be the worst if you have water and the bike has been sitting. You would have pure water in the carb. The reserve pickup is right at the bottom of the tank. So use it if you ever need to drain the tank fully.