2021 HONDA CR500R - CRF450R 2 STROKE Dirt Bike conversion build Part 4 - Start up
Автокөліктер мен көлік құралдары
This 2021 CR500R Conversion build is finally finished up! this started life as a 2021 crf450r that we then swapped the legendary Cr500R engine into it using our custom billet engine cradle and mounts for the 2021 style chassis! Our goal was no welding, and create a DIY kit that anyone can install... will we sell these? Comment below if you want us to bring it to market!
Stay tuned for a full test and ride video!
For more info www.bvcoffroad.com
Call us for build inquiries 518-563-3699
Пікірлер: 336
Love it! Except for the thumb throttle lol
Bought the kit, lines up perfect. Staff is very helpful and courteous. Our business is custom fabrication and we opted to purchase this kit, it was a no -brainer. Your attention to detail is noticed and appreciated. Well done guys!
@BVCOFFROAD
2 жыл бұрын
Thank you sir! 💪🏼🇺🇸
@pmtfabrication3468
2 жыл бұрын
@@BVCOFFROAD Hope it helps...
If your thumb gets wet or muddy seems like it will be slippery to press. I couldn't imagine doing whoops with a thumb throttle.
@constantelevation_
2 жыл бұрын
Rightt how can you move your body with your hand in the same position i dont get it
That thing is Fu$%ing sweet bro! (besides the thumb throttle😂) Cr500s are about as bad ass of a dirtbike as you can get, and swapped into that frame makes it look so good! Honda should be making those bad boys from the factory!
@jmsblk1
3 жыл бұрын
They never will there is not the market for them they might sell 5% as many 500s as they would 450s there is just to much competition in the market now and profits are lower than ever so unfortunately its not going to happen.
Simply stunning, I think this is the most beautiful 2 stroke 500 I have ever seen, if the factory were to release a genuine CR500R 2 Stroke in 2021 I think this bike would look 99% accurate.
Bike is sick and then you pointed out the thumb throttle, wth? I want the bike because it's a 500 in a new chasis, love it to death, just put me on a throttle, braaaaaap
Looks cool and like the conversion bits. I still think an airbox is needed and not just a filter w skin.
@curtisnokes3604
3 жыл бұрын
Needs air box. But very very nice otherwise
@baby-sharkgto4902
3 жыл бұрын
I (think) it may or may not need an airbox. I think it would need dyno testing to determine if power is being lost with this set up.
Wow!!! Thing is a monster!!! Literally looks like it came from the factory! 👍🔥
One of the most beautiful CR500s I've ever seen. Thx for sharing, enjoy!
Amazing build! A sound forever imprinted in my mind. I owned an 89 for ten years.
Like every other build you do. Flawless
Best looking conversion I have seen so far!🤘
Wow I have seen a many conversions -this is one of the best if not the best. Thanks for sharing
Insane man! Well done!
Very nice engine swap.that is what all older 500 riders dream of.thank you
thats so cool these new ones are so convertable, I built a few on mid 2000s 450s the Y was too low so had to do a lot of hacksawing. 85 1/2 short rod motor with balanced rebuilt crank it ripped!
Just saw the end of the video.... Definitely do that!
Been riding big bore forever that one looks awesome 👌
Beautiful looking bike guys. Brilliant job.
Love it!! Awesome work but not a fan of the thumb throttle.
I own a 1994 CR500, this NEEDS to be a kit for the new aluminum frame bikes. I would buy one in a heart beat! Keep up the amazing work and GREAT job with build. Incredibly clean and practical for the everyday mechanic to convert to aluminum frame!
@jonmotox9903
3 жыл бұрын
@@dennismillus4581 I have spent many hours on the buult500 website and google images, but BVC has made a complete Bolt in 500 kit.....thats a game changer. In that aspect it opens up new doors for the average mechanic to make a af500 without being a professional welder or buying a AJ Wagner service 500 frame.
This really is ingenious Bill. Congratulation!
@BVCOFFROAD
Жыл бұрын
Thanks!
That's cleeeeaaan! Such a great idea you had. Now I'm going to sit and wait for someone to grenade their 2021 crf so I can get a good deal on one to convert.
That’s a really clean build
What a work of art that is my dream CR500
Absolute work of art well done 👏 a+
As a previous Service Honda race team member I approve this video.
Really sweat bike but I would definatley go with a twist throttle myself. Looks like a fun bike to ride good job guys!
Straight up bad ass! Looks sharp!
Man, what an amazing job!!
Great clean build!
Sick build! Well done 👍🏻. I want one
Absolutely incredible. Wow!!
Wow that's 1 badass bike
Looks insane!!!
Great work and interesting content in your build videos 👍
Top quality work. Well done.
clean conversion there 👌
I would love to have one of the cr500 motor conversion kit, it looks amazing and really fun
Definitely want to see more
Hello from PORTUGAL, a real good job👌👌
That thing is gorgeous 😍
Great build ..looks the biz !:) 👍
Very nice work!
Man that thing is sick! I'll be coming thru az back to Texas. May have to come to the new shop and talk lol. Need to start my big wheel project haha
Thats one sweet ass bike!! I like the idea of a thumb throttle on a dirt bike.. would have to actually ride it to see if i liked it enough to keep it on there
Hell yea, sick build
More please .... keep it goin!!!
Definitely built the kit you made look easy how ever all the knowledge you have acquired all the builds you have done really shows the greatness of a kit that the market needs obviously you will need to built a better kick starter than that !
Very clean build gentlemen and
@jemickar4220
3 жыл бұрын
The thumb throttle is a unique perspective!! Nice ☝️ one
Nice bike I like the 250 to 500 conversations but the 4 stroke conversation is nice and a little more work with the motor mounts and kicker gas tank. Really nice bike. Any 2 stroke conversation is good with me we got to keep the 2 stroke alive and strong.
CR 500’s are a beast !!!
That’s a beautiful bike
Very nice beautiful bike good job
Yes sir. Run the kits. 💪💪💯💯💯💯💯💯
Just found your channel, and dang that bike is trick as hell!
@BVCOFFROAD
3 жыл бұрын
Thank you!
Top notch build
I love the thumb, I need to do that to my street legal 500 steely
Love the flags!
Super nice bike, best lookin bike and it's a CR500 👍
perfection simply put stunning bike
Awesome bike!
Yall did and damn good job super nice 👍 bike.
Very creative
Damm that looks sick
Best of the Best !!!!!!!!!!!!!!! Very good job !!!!!!!!!!!!!!!!!! Thanks of video !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Brutal good job very especial motorcicle and unik
Just amazing!
I thought it was gonna be a big wheel?!? Whatever y’all do with it, it’s still gonna be sick! FRIGGIN MINT👌🏻
@BVCOFFROAD
3 жыл бұрын
It might be still
@bradpowell843
3 жыл бұрын
Don’t do it! Haha This bike is just absolutely perfect as is.
@DoubleADay
3 жыл бұрын
Why not? The parts are interchangeable
This is my new fav
Thumb throttle? I love you. You are an inspiration
@BVCOFFROAD
3 жыл бұрын
Love to get reactions! 😂
@theoneandolny95
3 жыл бұрын
@@BVCOFFROAD what jetting are you running?
Awesome!! I knew a couple guys back in the 90s that raced GNCCs in dirt bikes with thumb throttles, you need to take that to Southwick for the 500 shootout with Ken Kaplan
@kurtpotter6994
3 жыл бұрын
Clean Bike but I don't know if they could hang with those boys!
Dude!!! You have been running a thumb. That’s perfect. I’ve been running thumb on my dirt bikes for years. People look at me like I’m stupid. Your arm position is always in a attack throttle side. Total believe in it. Sick build by the way. Super awesome
Absolutely unbelievable can I have it. Run the kit no question.
Bro I think it's awesome Im a 2stroke junky all the way I've got a 98 cr250r bike and I have 2 89's TRX 250r fortrax quads I would love to have one of your cr500 builds!
Defo make the kits available pal that would be absolutley awesome mate
That bike is very nice n well bulit....I used to have a KX 500 those an the CR 500s are a different breed...they are WICKED!!!. Wished I'd of kept that ol KX 500 an restored it back...nice welds btw
Amazing work! I bet a 500 2 stroke honda motor in a modern quad chassis would be amazing!
@BVCOFFROAD
3 жыл бұрын
Sadly Without a counter balancer it would be horrible ... BUT. We will be experimenting with the KTM300tpi motor with possibly a BRC big bore... or waiting on Panthera to release their new motor
@MartellAVP
3 жыл бұрын
How did you guys do the trike zilla motor? That was a Honda motor correct?
Amazing!!
Absolutely KILLER bike!!! Sign me up! Only I don't want the thumb throttle!!! Everything else is perfect
That thumb throttles super unique. I was iffy on it at first like,"thats not supposed to be there?!" But its cool. Might as well change it up from the norm so its not norm lol.
@BVCOFFROAD
3 жыл бұрын
Always trying to be different
I definitely think seeing the 125’s & 250’s being built would be cool as hell
@warrengreen3217
3 жыл бұрын
Honda said there bringing them back this year 125 250
I think that 500R is bad ass man! I’d respectfully suggest putting a pipe protection kit around the header pipe so it stays undamaged
I’ve owned and built quite a few CR500’s… I’ll be out there in a few months and would love to swing by and check it out… I have a 2022 CRF450 on order
Abso_fkn_ LUTELY (the hard part is gonna be rounding up everything else) im ALL IN . 🤘🏾Hellyeah!
Great looking bike. I own a 2021 450RX and it is a real arm straightener. I cannot imagine that 500.. probably to fast to be fun.
BADASS!
Absolute beast
I love the bike
Very cool
Made in Japan 🇯🇵 Perfected in USA 🇺🇸 God Bless All Riders 🙏
@rodneyjones4890
3 жыл бұрын
Really ? AH HA HA HA HA.
Lovely Job Love 💘it
Beautiful conversion if only Honda still made the CR 500
Trying to purchase one of your kits right now! Really looking forward to having my 01 CR250 in my 2023 CRF
@BVCOFFROAD
7 ай бұрын
💪🏼🚀 www.bvcoffroad.com i have all the kit info listed
@sebfullick5011
7 ай бұрын
@@BVCOFFROAD I have ordered and paid earlier today!
Looks awesome, seeing the adaptor on the bottom of the tank and having all that extra space above the carb, I wonder how hard it would be to build a tank extension into the free area to give more fuel range for longer rides. Great work
@BVCOFFROAD
3 жыл бұрын
It could be done ... i would add a Y fitting on the fuel line and have an extra tank
looks great !!! i still have my 84 i bought brand new for $1900.oo
magique !!! bravo !
Good very good indeed
@originalbud104
3 жыл бұрын
Very very nice
@eurocoinsdefectsanalysis3755
3 жыл бұрын
THE MAN
That's so clean! Amazing. Would you ever consider a kit for a 17-18 or 19-20 2 stroke conversion?
Pretty sweet build. I say do a run of these kits. I am sure they would sell.