I love your videos. You actually take your time and explain how it needs to be done.

Love, Love, Love This!!! Thank You!!!

Thank you so much for making this video. ❤

Thank you Queen!

Thanks for the motivation

Your hair is beautiful! 😍🌈✨🌺

Absolutely beautiful I am just loveing the can you tell me we're did you get your charms and thanks for sharing and God bless you and continue with your blessing

Thank you

I used the diamond glaze before and for some reason when it dried you could see cracks underneath the glass,do you know why that might of happened

When you put the glass cabochon on top of the photo with the diamond glaze and press… do bubbles appear and ruin the image?

My photos are fading do u have any idea why it could be doing that i use gloss paper

Hi, thanks for sharing your video❤, can I ask what kind of chains do you use for the necklace pendents ,where can I purchase them?

Can you post the link for the pendant Circle in angel wings

I cant find the glass cabochons for the hip hop pendants where did you get your

I bring up the print preferences and it let's me print out 35 1" or 25mm images.

HEY MS LADY I ENJOYED YOUR VIDEO AND I JUST WANT TO SAY THANK YOU FOR PROVIDING INFO ABOUT YOUR PRODUCTS, MOST PEOPLE WANT TO CHARGE A FEE FOR A VENDORS LIST WHICH I THINK IS CRAP, I OWN BLING IT ON TEES IN INGLEWOOD CA AND WHEN PEOPLE WANT TO KNOW ABOUT PRODUCTS I LET THEM KNOW WHERE TO GET THEM, THESE PEOPLE ON HERE THAT WANT TO CHARGE OUR OUT OF THEIR MIND, THEY MUST FEEL THREATENED THERE IS MONEY TO BE MADE FOR EVERYONE! I WILL BE PUTTING YOUR LINK EVERYWHERE I CAN

Lol facebook. Too many social media's. Thanks for the tutorial

How did you decide how much you should sell your pendants for

What type of paper are you using to print the photos?

How do you print the pictures to that size do u use a software what do I need

How do you take the cover off the pendant ?

Where do you get the blank pendants from?

Could you plz tell me what kind of photo paper to use

Which glue would you recommend to use for say printed sheets that I can buy at Hobby lobby or magazine pictures

@ReginasCrazyLife

Жыл бұрын

I would just try E600 because other glues will mess up the picture.. I personally haven’t used printed sheets or magazine pictures before plus now I just use sublimation

Is that glue water proof

How much do you sell the pendant with a picture

TFS🥰I used the 1 inch whole punch for whenever I do this project.. but sometimes it’s good to use the scissors to..just incase it cuts off some of the pic..🥰

What size do you make Images for the wing pendant

@ReginasCrazyLife

2 жыл бұрын

1.0 x 1.0

Hey. So you print them with a regular printer and the Cricut printer cuts them ?

@ReginasCrazyLife

2 жыл бұрын

I print with a regular printer and cut them out by hand but you can use the Cricut

Where can I order this pendants at?

❤

Why don't you glue the cabochons on the picture and then glue the picture on the bezel tray

Hi, can I use any printer and use photo transfer paper or does it have to be a photo printer or sublimation? (Sublimation Is a bit too pricey for me right now)

@ReginasCrazyLife

2 жыл бұрын

With the cut and print method you can use any ink jet printer, use photo paper or sticker paper to print your photo on in color

@Theinfiniteconnects

Жыл бұрын

Does it change in the water

What did you use to make the picture stick once you put the picture together?

@ReginasCrazyLife

Жыл бұрын

I made my picture into a circle in Cricut design space

Hey, I use the diamond glaze as well but some of my necklaces started to get a blue tint once finish hours later. Have you had that problem ?

@ReginasCrazyLife

2 жыл бұрын

I stop putting the glue on top of the photos and purchased epoxy dots to cover and protect the photos

Is the process the same using the E6000 glue?

@ReginasCrazyLife

3 жыл бұрын

Yes

What size is the image set too? Thank you and God Bless.

@quinterriajohnson694

3 жыл бұрын

I think she said 1x1

@ReginasCrazyLife

3 жыл бұрын

It is 1x1

@propheticallyyours1119

2 жыл бұрын

You can also buy precut images. Mercari has lots of pre cut images for sale they are 1 inch or 25mm. They have sorority and teams and so much more. Makes it a little easier for you.

What size are the images?

Where do you get the necklaces you use from? What’s the name of them?

@ReginasCrazyLife

2 жыл бұрын

I get them off Amazon and the Hip Hop spinner pendant necklace is available on my website sidehustlequeencreations.com

Hey what site or app do you use to get the pictures an inch

@ReginasCrazyLife

2 жыл бұрын

I use my Cricut explore 2

What am I doing wrong. I use the diamond glaze and my pendant start cracking after a couple of days.

@ReginasCrazyLife

2 жыл бұрын

I never had a pendant crack

Why are my pictures fading after gluing dome on top? It dries beautifully, but then becomes cloudy! Help!

@LushGlasses

9 ай бұрын

same problem here

@lateshamason7815

6 ай бұрын

I’m having the same problem. Then I tried the glue dots and it fell apart after falling once.

What kind of printer do you have?

@ReginasCrazyLife

2 жыл бұрын

I have a cannon photo printer it was $39 at Walmart

North Philly peace Park love

It’s a nice tutorial about pendant photo. Good job. Also I would like to know that I don’t have a printer so can I stop by staple for printer, is that good idea? Pls let me know thanks 🤗

@ReginasCrazyLife

2 жыл бұрын

Yes you can get pictures printed any where.. I just my job printer when I low on ink.. LOL

What printer do you use?

@ReginasCrazyLife

2 жыл бұрын

I have a cannon

u didnt show how to use e6000

If i use epoxy dots do i still put glue over the dot

@ReginasCrazyLife

2 жыл бұрын

No glue is not needed with the epoxy dots

@enviousstylezboutique6023

2 жыл бұрын

@@ReginasCrazyLife ok thank u

which is better "mod podge" or diamond glaze......Will the picture fade after awhile

@ReginasCrazyLife

2 жыл бұрын

Diamond glaze

Can photocopy paper with printing on it be used

@ReginasCrazyLife

Жыл бұрын

Sorry but copy paper can not be used.. the minute you add glue it will mess up the picture

@carlynsdiycrafts

Жыл бұрын

Yes, but be sure to protect the photo with a clear packing tape. This will not mess up the image.

so I tried this yesterday and printed an image on photo paper. I used modge podge the dimensional type and it made the color bleed what do you recommend?

@michelewalburn4376

2 жыл бұрын

Have you tried decoupage glue? I like it much, much better than modge podge.

@paolamejia9826

2 жыл бұрын

@@michelewalburn4376 haven't yet will do so. I even tried diamond glaze and it was a little better

@mskjohnson85

Жыл бұрын

When I use diamond glaze it seems to leave like a wet look if you turn it in different directions

@laneshadavis4630

7 ай бұрын

How did you print the picture

Why is my picture fading I'm going step by step

what's the best way to replace the photo?

@ReginasCrazyLife

2 жыл бұрын

I boil mine in hot water and pop them back out

@goskateboarding1535

2 жыл бұрын

@@ReginasCrazyLife thank you

Were do I find the chains

@EricaAndLala

3 жыл бұрын

You can get chains from Walmart, hobby lobby, michaels, online ANYWHERE. You can choose your own type of necklaces

@desireejohnson8877

3 жыл бұрын

I done look everywhere

@desireejohnson8877

3 жыл бұрын

The e6 glue dont work for me

I used the diamond glaze and my pictures bleed out any tips?

@ReginasCrazyLife

Жыл бұрын

Let your photo dry overnight..

@jennigutierre9626

Жыл бұрын

Thanks!

@carlynsdiycrafts

Жыл бұрын

Try using a clear packing tape to cover your photo before you apply the diamond glaze. Then place the glass dome on top. Press it to move the bubbles out. This way your picture will not bleed.

@jennigutierre9626

Жыл бұрын

Great thank you I will try that

Where do we get th necklaces?

@ReginasCrazyLife

2 жыл бұрын

I get them off Amazon… I will add the link when I get off work.. If your in the craft group it in the comments under the picture

@ReginasCrazyLife

2 жыл бұрын

Here is the Link amzn.to/3yx9Rlg

I have a question I keep getting lines in my photos that I print on my printer any suggestions on how to stop that from happening? God bless you

@ReginasCrazyLife

2 жыл бұрын

The only thing I can think of is that must be some dusk or something in your printer. You may want to blow it out.

@hyperpunk3499

Жыл бұрын

Change the print quality settings to "high". And, make sure your printer isn't low on ink because the high quality setting uses a lot more ink than the normal and draft settings.

How do I get the circle on the picture

@EricaAndLala

3 жыл бұрын

Download the app called bazaart upload a picture and then swipe left until you see where it sais “shapes” and it will show you many shapes you can use. This is how I do mine. Very easy

@desireejohnson8877

3 жыл бұрын

Think u so much

@kayblendzmmj6256

2 жыл бұрын

@@EricaAndLala do they have dot around them to cut them? If you don't have a cricut cutter?

@EricaAndLala

2 жыл бұрын

@@kayblendzmmj6256 no they don’t. If you have the glass cabachons you can put that on top of the picture and trace cut like that

@propheticallyyours1119

2 жыл бұрын

Mercari has lots of wonderful 1 inch pre cut images for sale.

how do you get pictures or designs to print?

@ReginasCrazyLife

3 жыл бұрын

Hit make it in cricut design.. when the print and cut screen comes up just hit print and send it to your printer.

How do you know what size glass dome to use?

@ReginasCrazyLife

Жыл бұрын

I buy the blanks that come with the dome

I have a question. How do I stop from getting the pictures smeared when I put glue on it?

@ReginasCrazyLife

2 жыл бұрын

I let my picture dry for a few hours before I use the glue

@chechecombs

2 жыл бұрын

@@ReginasCrazyLife I've let my pictures dry for 24 hours and the pictures still bleed. Are you using a certain setting on your printer?

@ReginasCrazyLife

2 жыл бұрын

I using regular printer setting..It could be the paper your printing on..

@propheticallyyours1119

2 жыл бұрын

I would buy epoxy dots. Same look but they stick on

I felt like watching the whole thing from a satellite

You should update and re do this video and zoom in on what your doing it's really hard to see what your doing.

@ReginasCrazyLife

9 ай бұрын

The video is 2 years old. I do sublimation pictures pendants now

Much to far away to see anything!

What kind of printer do you have?

@ReginasCrazyLife

2 жыл бұрын

I have the Cannon MG 2500Series

@kayblendzmmj6256

2 жыл бұрын

I want to do this and don't have a printer..I'ma have to go to Walmart they got printing til I get one for myself