2021-2022 Ford Bronco Flush Style LED Tail Lights from ORACLE Lighting- DIY Installation Guide
ORACLE Lighting is excited to reveal our new flush mount LED tail light design for the new Ford Bronco. Protruding out significantly less than the factory tail lights, this low-profile design helps avoid potential damage while trail riding. These Ford Bronco tail lights feature an attractive design and functional LED lighting elements including high-powered reverse lights and unique signature perimeter lighting
No more problems backing up at night because these LED reverse lights are basically a pair of LED light bars mounted into the tail light which will provide high-output rear-facing illumination.
This innovative design wraps tightly around the truck. Because of the nearly flush wrap-around design, the lighting can be visible from any rear angle, making it a unique solution for the Bronco. These flush tail lights provide improved aesthetics and functional LED lighting features including high-powered reverse lights and signature perimeter lighting.
As you can see in the animation below, these lights wrap tightly to the vehicle body providing a "Flush" mount design which not only looks great but is functional as well.
Wanna learn more? Check out our website! www.oracleligh...
OBDLink EX FORScan OBD Adapter: www.amazon.com...
FORScan Software Download: forscan.org/ho...
FORscan Settings:
Left Rear Stop & Position Lamp Usage - Stop & Turn
Left Rear Turn Lamp Usage - Not Used
Rear LED Turn Outage - Disabled
Right Rear Stop & Position Lamp Usage - Stop & Turn
Right Rear Turn Lamp Usage - Not Used
- Will not fit Bronco Sport
- Will not fit Bronco Raptor
Пікірлер: 35
Just got my tinted tail lights! Going to install them now.
Buying the blacked out ones
We got them on our Cyber Orange!! Love them!
Just ordered these, can't wait!
Just ordered these after my wife managed to put a big hole in her left housing on her First Edition...the dealer wanted $1300 for a single housing (which is currently backordered). Frankly, these look way better and I'll be able to pay for them by selling the good one on eBay
Wouldve been nice to know that i need to buy a forscan license to actual program my lights.
@SMITHZAC000
Жыл бұрын
Its $13...
Is this plug n play for non oem led taillight no need forscan?
I installed these today, all went well with install and Forscan changes...I have a spare tire led light from XK Glow..now the turn signals on that light doesn't work..
You need to make a version that has the separate Amber turn signal
@ORACLElights
22 күн бұрын
Here you go www.oraclelights.com/products/oracle-lighting-dual-function-amber-white-reverse-led-module-for-ford-bronco-flush-tail-lights
@ay-ay-ron8895
22 күн бұрын
@@ORACLElights do you make an Amber version for the Jeep Wrangler JK?
@ORACLElights
22 күн бұрын
@@ay-ay-ron8895 we do, its the same as the JT. Here you go www.oraclelights.com/products/oracle-lighting-dual-function-amber-white-reverse-led-module-for-jeep-gladiator-jt-flush-tail-lights
@ay-ay-ron8895
22 күн бұрын
@@ORACLElights the JK has the same module as the JT?
@ORACLElights
22 күн бұрын
Correct, there is not an Amber turn signal option from the factory for the JK so this is good for Euro/Export conversions or to use for chase lights.
Will it work with the raptor?
I just got these and my bronco is the Wildtrak model so I believe it has the LED taillights. I have a couple questions: 1) what do I do with the resistor? 2) the second piece you cut with the snip tool is hard to see - can you explain this piece? Thanks!
@ORACLElights
Жыл бұрын
1) If you have LED lights you can drop those in the nearest waste basket, you don't need them. 2) It's not a precison cut, you just need to make space for the factory trim to clip in. If you hold the trim up to the tail light you can see what is causing the interference (its a small plastic rib) just cut that off and you are good to go!
@sjmucollari
Жыл бұрын
What were the forscan settings on your Wildtrack before updating them to work with the aftermarket lights?
Does the dealership do the configuration on the lights?
@ORACLElights
Жыл бұрын
They can but you can get the OBD tool for like $20 on Amazon and make all the changes yourself plus you can adjust and unlock other features on your Bronco yourself.
Do you have smoked out taillights that are flush that don’t require for scan?
@ORACLElights
10 ай бұрын
Yes, order the 5892-504-T www.oraclelights.com/products/bronco-flush-tail-lights and then add www.oraclelights.com/collections/new-products/products/oracle-lighting-dual-function-amber-white-reverse-led-module-for-ford-bronco-flush-tail-lights
@joshr19821
10 ай бұрын
@@ORACLElights do these have a sequential turn signal feature?
@ORACLElights
10 ай бұрын
Negative
wow
Thx for the video on the laptop, but could go slower and less blurry on laptop image, would be awsome.. not bitching just positive comment. Still manage to do it lol
When are you going to come out with some that you don’t have to do the foreskan ?
@SMITHZAC000
Жыл бұрын
Never. Forscan is $13 for a year of use...
@TheChuck1960
Жыл бұрын
@@SMITHZAC000 not worried about the cost, just not comfortable going into the computer system and changing things.
@ORACLElights
10 ай бұрын
you can use these modules so that ou do not need ot make Forscan changes www.oraclelights.com/products/oracle-lighting-dual-function-amber-white-reverse-led-module-for-ford-bronco-flush-tail-lights?_pos=4&_sid=897df13ff&_ss=r
ᎮᏒᎧᎷᎧᏕᎷ
I’m having a hard time getting the thin piece of trim to the left of the passenger side wth!!
@ORACLElights
Жыл бұрын
did you follow he steps at 4:20 in the video?
@benitocamelo5441
Жыл бұрын
I had the same issue. Turns out you just have to loosen up the 8mm bolts until it looks flush with the other panels. I tightened them up all the way and it looked goofy as hell 😂