Great work, will be following this guide on the weekend!

Awesome, My Jimny gets delivered next week. This is a great idea! I can't wait to start adding mods like this to it! I love your other videos btw.

@BillyGoatJim

3 жыл бұрын

Cheers, Enjoy the Jimny. So much fun

Good stuff dude love seeing DIY jimny stuff.

@BillyGoatJim

4 жыл бұрын

Good to hear

great videos..please keep it up! Retired American in the Philippines moding a JB74 and I like your setup. Didn't know if lockers were available but your video answered that question. Thanks.

@BillyGoatJim

4 жыл бұрын

Thanks. They’re a great car and once you add lockers they can go just about anywhere

You mentioning the points that already come in the car are M6 just maemy day, gonna run tomorrow morning to the hardware store for some smaller tie down points :D thanks a lot for this video!

@BillyGoatJim

4 жыл бұрын

You’re welcome 👍

A cool set-up for any 4x4 - cheers.

@BillyGoatJim

4 жыл бұрын

Cheers 👍

Hey mate! Hope you’re well! This is an awesome idea! I was wondering if you could help me out with the measurements for LxW for that jack holder area? As well as what the height of the styrofoam is at its thickest. I’m looking to mount a battery back there using your technique, but my Jim only arrives in a few months and want to make sure that I buy a battery that will fit in there.

Great guide!

I'm currently doing this and have rhe back tie down points in and theyre awesome hey. Cheers for the tip! Looking at doing the ones in the carpet and i dont see how it's humanly possible to get a spanner in there to do up the nuts hey. Might have to get the carpet brackets a miss unfortunately

@BillyGoatJim

4 жыл бұрын

Good to here. Yes there was a lot of four letter words getting thrown around trying to get to those nuts

Good idea!!! Come to Spain and do it in my Jimny! :D

For front and rear tie downs I have used the M6 Bolt in the rear as shown. However for the front I have taken out the trim fitting under the rear seats and fitted an M6 tie down there too. 2 Second Job and Front and rear tie down on both sides.

Are you powering your fridge by the 12V in the back connected to the starter battery? And if so, Any issues so far?

Can I ask is there a reason you didn’t just use the child seat mounting points at the rear? Love what you’ve done. Very practical.

Simple and awesome!

@BillyGoatJim

4 жыл бұрын

Cheers

I cant seem to find the Grunt 50mm Tie off on bunnings, they must have cancelled the product :(((((((((((((

@BillyGoatJim

3 жыл бұрын

That sucks. I don’t recall seeing them lately

Good video champ .... go the Zook 😉👍 One quick question though - why did you use cuphead bolts that are designed to pull into timber when you were tightening down onto metal ? The square section in the shaft and domed top wouldn’t allow you to really tightening it right up ? I thought you’d just use a hex head bolt so you can hole the bolt head tight as you tightened the nut ... 🤔 Or do those mounts have a square hole in them that holds the shaft still while tightening the nut ? Anyway, great video champ. Great little car and great to see you out and about using it - Turon is a top spot eh. Keep up the great work 👍👍

@BillyGoatJim

4 жыл бұрын

Thank you... You’re spot on, the brackets have square holes that take the square section of the bolt... Turon is beautiful. Might catch you out there one day. Cheers

@4WheelingInNSW

4 жыл бұрын

Billy Goat Jim name the day champ 😆 My mate has a new Jimny, great little car off-road. We did a good run Sunday just gone through the Gardens Of Stone National Park and the Baal Bone Gap track - great fun 👍👍 We fitted up an xrox bar to it few months back, looks pretty cool. kzread.info/dash/bejne/dp6O0teQZ9quaNo.html

@BillyGoatJim

4 жыл бұрын

Nice one, I was just up at Newnes on Friday was thinking about heading up that way but ran out of time... The new Jimny looks great with the xrox

@4WheelingInNSW

4 жыл бұрын

Billy Goat Jim Newnes eh - probably passed each other on the way out 😆😆

Well done!

@BillyGoatJim

4 жыл бұрын

Thank you

@LEGD10

4 жыл бұрын

Do you know if they ship to USA? I dont like the quality of the one that I can get here, those Grunts looks amazing.

@BillyGoatJim

4 жыл бұрын

I’m not sure. We can buy them at our local hardware down here.

Awsome video dude, I have the old style jimny as my daily 03 reg and I love it 👍🏼

@BillyGoatJim

4 жыл бұрын

Cheers, can’t go wrong with a jimny

@James.watson4

4 жыл бұрын

Billy Goat Jim love it!!

Niceee!! I will do it

@BillyGoatJim

4 жыл бұрын

Good to hear 👍

Any reason why you didnt want use the baby restraints tie in point?

@BillyGoatJim

4 жыл бұрын

Child restraints aren’t designed to hold cargo at odd angles you may end up compromising the integrity of the restraint if you use it to strap down 60kg worth of fridge off-road.

@altragoat8090

4 жыл бұрын

@@BillyGoatJim Makes sense mate. Really enjoying what your doing with your Jimny. both in the shed and on tracks. Subbed!

@BillyGoatJim

4 жыл бұрын

Cheers, some new stuff coming soon

Just to compliment your writing text,since no one has noticed or knows, but I think it’s the font is from golden eye on n64. Nice trick

@BillyGoatJim

4 жыл бұрын

Wow if that’s true you have keen eye... I’m not sure if it is. I loved that game

Does anyone found these on amazon? Im in Panama and i cant find anything like this on amazon or ebay..

@whisthpo

4 жыл бұрын

This is the sort of kit you need ! www.amazon.co.uk/Professional-riveting-pliers-including150-Riveting/dp/B0735H845M/ref=sr_1_2?crid=3GVM2XFGELGQW&dchild=1&keywords=rivnut+kits&qid=1592174097&sprefix=riv+nuts%2Caps%2C204&sr=8-2

"and the hardest part was trying to reach some of the nuts because the Jimny is so cramped in places." Have you tried Rivnuts? They were made for when there is no access on the other face your drilling into...

@BillyGoatJim

4 жыл бұрын

I didn’t even think of that. Not a bad idea. Cheers

@whisthpo

4 жыл бұрын

@@BillyGoatJim Thanks for the reply Jim, I have used them for quite a few yrs now but just recently, I bought the 'Proper' tool for them...to say I had an 'epiphany' would be an understatement !

@BillyGoatJim

4 жыл бұрын

They’re a great invention. I have used them before but it didn’t cross my mind in this situation. 👍

@SimpleSapien368

4 жыл бұрын

Never used these before, great idea. Would a steel M8 rivnut be sufficient for moderate loads?

@BillyGoatJim

4 жыл бұрын

As long as you don’t put too much force on it, just keep in mind If you’re off road bouncing around this may put extra force on any tie down points

What a camera did you used?

@BillyGoatJim

4 жыл бұрын

I used a canon m50

@thaddaus8841

4 жыл бұрын

Billy Goat Jim ah okay and what a lens?

@BillyGoatJim

4 жыл бұрын

Just the kit lens that comes with the camera

@thaddaus8841

4 жыл бұрын

Billy Goat Jim okay thx