Nice!!!! I have a Ford Taurus SHO and i had to install load resistor on all four corners for this mod.

thank you! I just got 2020 odyssey and want some mods ! I can follow!

Thank you. Very informative and helpful video. I really appreciate 👍👍

Thanks for the video very informative, would you do a video about the 2018 odyssey third brake light

Thanks a lot for your diy videos, wondering if I change the front turn signal light bulbs with a built in Led + resister/can bus & the rear's without a canbus, would it not trigger hyper flash? I have a 2019 Odyssey EX-L; in your other video replacing front turn signal you made a comment that only in Touring & Elite you anticipate hyper flashing. Any suggestion on whether EX-L would require canbus/resister at all would be helpful. Thanks.

GOOD NEWS!! These Antline LED bulbs are back in stock.

Hi i just installed my led lights but why i have a hyper flash. I isntalled a risistor already in the front ?

Hi do you have a video installing the license plate led bulbs on a 2018 odyssey

As an owner of a 18 exl the day has come!

@dial2fast

4 жыл бұрын

I know many people with 18+ Ody have asked for this video. Sorry it took so long but it's finally done...lol

@StormShadowX37

4 жыл бұрын

@@dial2fast I appreciate it!

I have 2018 EX-L do I need loader for front or back turn lights?

How you can fix the led taillights when you turn lights on

Is the link correct for amazon regarding the bulbs? Doesn't seem right

Do all the lights you changed on your 2019 fit the 2018 LX modelo??

I bought the same brand of bulbs and they don't fit.the sockets are way to big to hold bulbs.they fall right out.did you modify socket ?

Hello and very good and informative videos love all of the Odyssey series. But I have a doubt, I saw that you installed a Red led on the back of your 2018 Odyssey but also installed white led on the backlight of you 2008 Odyssey ! Which color will you said look better on the back of the Odyssey the Red LED or the White LED? Thank you for time

@dial2fast

Жыл бұрын

The white LED is brighter but behind the red lens, it's a lighter red color. The red LED is not as bright but behind the red lens is pure red.

Thank you so much for this wonderful video. With a pair of load resisters on the front turn signals, I do not require to add another pair of load resisters for the rear turn signals at all? Hope to hear from you.

@dial2fast

4 жыл бұрын

That's correct, I only have load resistors installed on the front, and no hyperflashing.

@vdgicofficial2866

4 жыл бұрын

dial2fast WOW... That’s great. Thank you so much for this video. Keep it up!

@ajnardiello

3 жыл бұрын

I have a 2018 odyssey ex and got all the same bulbs you recommended for this mod. I did the front mod and used a load resister to eliminate hyper flash, however I installed the rears without a load resister and now I have hyper flash.

@bykerdude29

3 жыл бұрын

@@ajnardiello I have a 2018 and bought the same bulbs and they don't fit.the bulbs are way to loose so I sent them back.

Did you do this before or after your front line conversion with the load resistor? Wondering whether doing just this mod without the front will result in the fast blinking when in engine stop mode like you had.

@dial2fast

4 жыл бұрын

This is done after the fronts were installed. So doing only the rear most likely will require load resisters as most flasher relays are tied to front and rear.

If I install load resistors on the rear turn signals, instead of the front ones as you did, will I be able to run front and rear led turn signals without also needing load resistors on the front signals? So it would be set up similar to yours, but with the location of the load resistors moved to the rear. This is for a 2020 Odyssey EX-L. Thanks!

@dial2fast

4 жыл бұрын

I can only guesstimate that it should work with the load resistors installed on the rear because both front and rear turn signals use the same flasher relay. But you will have to try to find out.

It was better than it was!

Hi there, if i want yellow rear turn. signal do i get amber verion instead or it doesnt. matter since the cover shell is red anyway, also do i need load resister for these? I decided to skip the mod for the front. Thanks!!

@dial2fast

4 жыл бұрын

The red lens will block the yellow light. Get either white or red for the rear.

Nice videos!! But do you have a video to change taillight inner side ,mine is broken i need to replace it. Thanks

@dial2fast

4 жыл бұрын

It's most likely held in by nuts from behind the plastic panel. So you'll need to remove all the plastic panels on the hatch.

@cristhianposada1823

4 жыл бұрын

dial2fast yes I removed it, but I’m thinking I have to figure out how to lose the pins for the chrome plate that goes in the right to left tail light inner

@cristhianposada1823

4 жыл бұрын

But to be honest I don’t have any idea how to remove the pins at least if I have to break them hopefully you come out with a video you are the master in this!!!

Hello and 5gabj for all the info. In the video you show a pack with a set if 4 builds. But the link is a set if 2 ligth builds. Do you have the link that u used that comes with the set if 4 ?

@dial2fast

Жыл бұрын

The 4 pack is no longer sold on Amazon. That's why I updated it with the 2 pack.

Help me what can I do with my directionals I put led and I get hyperflash.

@dial2fast

Жыл бұрын

Install load resistors in each side for the bulb.

I see alot of cars with led brake lights and they strobe when brakes are pressed. will that happen to these?

@dial2fast

4 жыл бұрын

No issue with strobing or flicker on these lights.

Load resistor or an electronic flasher to control the flash rate regardless of load. I used the electronic flasher and prefer that to the resistor as it is easier to install and causes less stress on the electronics.

Hey I got pull over last night because the left rear taillight was not working, I've changed all the light's and it still not working. I can't seem to find the taillight fuse location on my 2019 Honda Odyssey, I downloaded the owners manual and can't find it. Would you know the location of the taillight fuses.

@meganmoore6240

3 жыл бұрын

Did you figure out where the fuse is?? I can't find it either

they look nice were did you get the lights

@dial2fast

4 жыл бұрын

See link in description.

Are you installing leds for the fog lights and head lights

@dial2fast

4 жыл бұрын

My Odyssey already has factory LED headlight and LED fog. If you want to install H11 LED on your Odyssey, check out this video kzread.info/dash/bejne/eZallLJ9nbXHh7Q.html

@bykerdude29

3 жыл бұрын

@@dial2fast I believe the touring and elete comes with led headlights and fog EX doesn't

Nice vid but the incandescents honestly look brighter and they fill the housing fully. Beam pattern matters much more than raw lumens in automotive lighting.

@fanclub69

4 жыл бұрын

Yeah, fully agreed. Incandescent being the best one I am wondering what to do with this 21w /5w bulb. In market no 25w /8w approx. is available but I think slight upgrade to this for ex: 25 or 35 watt twin filament bike bulb (with DIY ofcourse ) can do better. So far just my thought. Have not seen anyone trying.

These LED taillight bulbs are currently unavailable!!😭😭

@dial2fast

4 жыл бұрын

I found another one that has good ratings from JDM Astar amzn.to/3kwC6dP

Why red leds why not white leds but great video

They look 🍊 orange not red...

what about reverse light? lol

@dial2fast

Жыл бұрын

Here kzread.info/dash/bejne/eYKDso-TY5m_fZc.html