Mine is a magma red 2018 super crew. This is literally a template for my over all goal over time. The only difference is I'm keeping my factory wheels because I like them, and I'm not taking my truck anywhere that the factory 20 inch wheel will be a problem.

Full race intercooler in combination with the light bar is a nice combo to solve any overheat issue.

Great Build 👍

Looking good! She’s a beast for sure! 🇺🇸🦅🇺🇸

Berry good

On my 2019 STX I'm running raptor wheels with 315 70r17. Did NOT cut the crash bars out.

@fratdaddy7434

2 жыл бұрын

What suspension you running? And offset?

@richardshaffer6057

Жыл бұрын

Could you fit a full size spare with that setup ?

@simpleinstinct

Жыл бұрын

@@richardshaffer6057 Yes.

@fratdaddy7434

8 ай бұрын

What offset are your wheels ?

@simpleinstinct

8 ай бұрын

@@fratdaddy7434 2 inch leveling kit, Bilstien 6112s and 5160s. An add a leaf kit. I had raptor wheels from a 2017 Raptor. I swapped them out for some 0 offset wheels and now they rub.

...Damn that's a good lookin truck! Aside from them fugly wheels. It's still in it's first 6 month period before the undercarriage rusts completely out!

you should do this again

Love it. Definitely the K.I.S.S. method

Very useful. Thanks. Two questions. How large a tire could I go with that set up without having to cut and trim? You said those were 33.9, basically, 34, but they did need that extra trim and cut. Also, does going with so small a wheel, does that in any way affect what brakes you can use? Thanks.

Did you only have to cut the front crash bars? Or was trimming of the rear crash bar also needed?

Just ordered the fox 2.5 kit from you guys. Installing it here soon on 17x8.5 with a 0 offset. I opted for a 285/75r/17 tire keeping the same 33”+ but slightly more narrow than the video 305 size, curious to see if I can run without taking off crash bars. Will find out soon!

@deadheart556

2 жыл бұрын

You'll be find. I have the same set up with Fox 2.0s

@Dansal1980

Жыл бұрын

Just curious…any updates on how it all fit?

What are the graphics on the bed that you added? They look nice and are not tacky looking.

Can you please list all the parts/connectors required to make the rigid fog lights work? Rigid said they may flicker going from a factory halogen to an aftermarket led. Also what bracket did you guys use for the upgraded fogs. Thank you.

@NoahStage3

2 жыл бұрын

Just added two new links in the video description. You'll need the Grimm Offroad Fog Light Brackets since Rigid's brackets are discontinued and you'll also need a pair of H10 to Deutsch wiring adapters to connect to the factory harness. We haven't had any problems with flickering on ours, but if you use a more powerful, non-street legal light then you could run into an issue. Hope this helps

I wish you guys would’ve gotten some night time shots of the beam patterns. great vid

Where were the action clips recorded?

Did you have to cut both front and back crash bars?

What size block in the rear

Were you able to fit the same tire size underneath the truck (spare area) ? Or you just keep it stock ?

@Marco-fi6gv

2 жыл бұрын

Great question. I was wondering same thing

​ @Noah Stage 3 Nice setup. I have a few questions you may be able to help me with. I have a leveled (2”) 2020 F150: --- Fox 2.5 Factory Race Series with Reservoir (No DCS) front and rear. -----Icon Delta UCA -----Icon Rebound 17x8.5 +6mm offset 1) Will the 305/70r17 fit? I know cutting will be involved.. Did you cut front, rear, or both front and rear crash bars? 2) How about 285/75r17? with same cutting follow-up question. Last one same questions : the reason I ask is I have 33x12.5 which work with no rubbing. However, I was sadly disappointed when I actually measured and they aren't 33. Thanks in advance! Appreciate your time. keep up the great content!! Sean

@zakarysmith7179

2 жыл бұрын

I just got the 305/70 r17 with a 17x9 0 offset wheel and there is a little bit of rubbing on the rear crash bar and rear carpet. Here pretty soon I'm going to cut just the rear crash bar and some of the carpet and I can get back to you and let you know if it rubs

@bigf1502

2 жыл бұрын

Have a 2” lift, run 275/65r20 Cooper Rugged Trek (34.6x11.6) on stock wheels. Tires have 18.5/32 tread depth. No rubbing/cutting : have wheeled her pretty good too.

@seanm1054

2 жыл бұрын

@@bigf1502 …I ended up going w/285/75/17 (33.8x11.2) and no rubbing.. if I go back to 20” then I’ll definitely gone the 34.6..

@bigf1502

2 жыл бұрын

@@seanm1054 That’s what I had on my last truck, it worked out great! Was a little smoother off-road with the 17s, but a little more roll on-road. Only reason I didn’t go to 17s is because I plan on buying a big break kit which I’ll need the 20s to clear the calipers.

@loganfranklinloganfranklin8342

4 ай бұрын

@@seanm1054offset?

Did you have to regear for the larger tires? I'm considering moving to a similar tire size up from stock and wondering at what point regearing is advisable?

@johnklug589

7 ай бұрын

Pretty sure you can fit up to 32s or 33s without cutting from what I've researched and heard

Did you guys put an aftermarket skid plate on it too? Or did you just remove the air dam?

@NoahStage3

2 жыл бұрын

No aftermarket skid plates on this truck yet. We just removed the air dam up front.

Dope build! Will the king coilovers allow to fit 315/70/17 tires?

@NoahStage3

2 жыл бұрын

Glad you like it! 315/70R17 tires can be made to fit with the King 2.5 suspension, but it will definitely require trimming the crash bars to avoid rubbing.

@oc6920

2 жыл бұрын

@@NoahStage3 got it thanks!

@yt310yt

2 жыл бұрын

@@NoahStage3 That is odd because I have Fox 2.0 setup on same F150 and I can run 315/70R17 (Raptor take offs) without any rubbing or crash bar removal.

@NoahStage3

2 жыл бұрын

@@yt310yt Well, you've got my attention haha. How much lift are you getting from the Fox 2.0s and what's the wheel offset? Do you get any rub under full articulation or while turning offroad?

@msalazar89

2 жыл бұрын

@@yt310yt raptor wheels offset are made for 35s to run on them. It's all about the wheel offset

for my over all goal over time. The only difference is I'm keeping my factory wheels because it's to expensive for me

love the video just curious if you have noticed a drop in fuel economy with these mods?

@benallyjaredful

2 жыл бұрын

I doubt that, these mods make the truck more aerodynamic. I'm willing to bet that mpg's 🚀🚀🚀

@bigf1502

2 жыл бұрын

Lol. 2” coil over system, 35x12r20 E Rated on mine… 3.5 ecoboost 4x4 SuperCrew. Went from 20 average to 15 mpg avg. smiles per gallon went from approx 5 to 25.

Pass side control arm bolts loose and wiggling at 2:06!!!!

@tylervanbooven5764

Жыл бұрын

I saw that too. Pretty crazy

You have a Tiny little disc brake. how come for such a big heavy car. My honda civic has Brembo and has larger disc brake.

You put a light bar where your winch goes 🤦‍♂️

@NoahStage3

2 жыл бұрын

Nahhh, not on this truck. This F150 spends most of its time doing wide open desert running so a winch is rarely helpful. A set of traction boards and a small air compressor do the trick and weigh far less. If this was more of a trail focused build or an expedition rig then a winch would be the way to go.