Craftsmanship at its finest . What a bunch of clods .

Who else is here watching these people work on the truck when you should be working on your own project lol

@tzume7292

4 жыл бұрын

I’m watching because in my country there is nowhere you can buy such model :(

@kx5xtr165

4 жыл бұрын

Oh absolutely 😂 more than one project

@adorpodol2557

3 жыл бұрын

@@tzume7292 mnnhhi

@oscarramos4684

3 жыл бұрын

Me

@technicallymax8197

3 жыл бұрын

I’m watching them to fill the void of not being able to own my dream truck cuz my sister won’t sell it 😂

I'm disabled but watching Week To Wicked gives me hope of what I can do once I beat these supposed uneatable nerve disorders. Thank you for putting them on youtube.

@bazd

Жыл бұрын

I have problems with legs spine etc. Is there no way you can get involved with a project locally at club perhaps??? Good luck from Scotland. Maybe not on the spanners/tools researching parts perhaps just get involved..

My dad had a 4x4 C10 back home in theCongo. That thing was a tank. I remember it being stuck in the mud pulling a big all truck loaded with tree trunks for his brick factory. The C10 went vroom vroom ...wheels spinning sliding left to right ever so slowly the truck started to move. My jaw dropped. The c10 did it

@jamesooten3659

4 жыл бұрын

My Dad had a 1970 C-10 too. Orange with a white roof & center section. There were a lot of people who were alcoholics where we lived. He was constantly pulling people out who went over the hill or into the creek. Once, a guy brought the tool truck home from work, but stopped off to have a few drinks on his way home. He went down about 8 ft into the creek. This thing had probably 1,000 pounds of tools, air compressor, wielding rig, etc. on it, but that truck pulled it out just as well as if it had been empty. Good memories.

@rayjos0424

4 жыл бұрын

If it was a 4x4, it would have been a K10. "C-10" indicates 2 wheel drive 1/2 ton.

I’m so glad to see you guys showing all the issues that go on during working on a truck. Made me feel like all my run ins with issues is not just me haha.

Ohh man look at those working hours, professionalism and sweet parts! I wouldn't suprised if this build'd cost about 200k.

That's some good editing, you can hardly tell it takes 6 months to get all the right parts delivered

I can’t stop watching these! So glad I found them

Frankly I could do with less antics and more facts. Very little about costs, and everything fits perfect, but the exhaust, and no leaks or parts issues. Insert sarcasm here it you didn't get it. If only life was really this good.

How I love to have a truck like that. I used to work on old cars, it's so much fun. But age (76) has caught up with me. Thank you guys. Job well done!

They made more of a mess taking that engine out than the roadkill guys

@justinphillips6136

4 жыл бұрын

\_\_Prongs2_/_/ now that is funny.

@mrnobody8540

3 жыл бұрын

From men that claim to know look like fools making a mess

This truck is one of the best looking I’ve ever seen . Color and all

What a beautiful build and perfect clean truck ! Awesome guys

Guy on forklift, " Holler at me when the bone is stickin through" lolol

Would love to see my dads old 72 c-10 get completely restored. Awesome work guys

Wow I didn’t know they could upload full episodes I’m surprised 😮

Wow! This is a dream truck. Good job guys.

Yet another Car\Truck show, where "amateurs" throw $60k worth of parts on a project just because, all the while using the worlds most expensive tools. Totally connects with those of us wanting to do the same in our own garages and matches our blue collar budgets. Nice job guys!

@raymondguzman5083

4 жыл бұрын

Lmao just make more money

@thatrealba

4 жыл бұрын

You completely miss the point of one week to "wicked"

@jamesooten3659

4 жыл бұрын

Check out Ed China's (original mechanic from Wheeler Dealers) You Tube show Garage Revival. He shows up at people's home garage with a van full of tool boxes & helps people who are stuck at a certain point in their build & helps them get over the hump (usually knowledge or skill related). Much better investment with your time than watching a bunch of clowns with impact wrenches.

@thatrealba

4 жыл бұрын

@@jamesooten3659 sounds interesting, I will definitely check it out. Thanks.

@rm33321

4 жыл бұрын

Thoughts exactly

THANK YOU SO MUCH!!!! I LOVE MY C10 FAMILY!!!! SO MUCH FUN!!!! A GREAT BUILD AND THANKS FOR SHARING!!! I LEARNED SO MUCH!!!!!

Very good work. The truck was updated. Greetings from Buenos Aires Argentina (South America).

That's a beautiful truck.

I don't understand why nobody drains the block anymore lol!! First thing I do before any cooling system maintenance...but it's understandable considering how excited this team was to get going on a cool project like this!! I just hate a messy floor, especially coolant! Sick C10 boys..Love it!

@keithbrann5086

4 жыл бұрын

SBC build I did I added brass petcock drains to the block - and I was only 19. They were super handy.

@____MC____

Жыл бұрын

Scared to strip out the allen plug.

This 1971 c10 is so clean just imagine having it wish I had it ❤️❤️❤️💯

I like that color!

Rather be watching this than my online school work

this is much better shown all at one time, thanks guys..

Didn’t realize it was an hour long episode until I finished lol

Tearing down a vehicle is where all the fun is at.

Now if I could persuade these guys to come to Texas and work on my 85 Mustang GT

can't wait tell I finish my grandpa 86 C10

@Shitty_bike_mike

3 жыл бұрын

That's not a c10

Man, who ever gets this truck is so lucky!

great Job - nice Finish!

Would love to see an itemized parts and price list of all the goodies....

Ummm all I saw those guys doing is stand and try and look like they knew what they were talking about lol. And wow that's the cleanest garage I've ever seen not one drop of oil and the guys all perfectly clean hands lol.

So another words..we’re going to use all bolt-on parts like we know what we’re doing, and then talk it up over and over again, trying to appear like were just soooo dang cool and know stuff!!

nice.i learned to drive in one of those. 3 on the tree, it took two feet to push the clutch. no ps or brake.

My dream truck ..

I'm glad these videos exist so I can see how my CPP sway bars are supposed to mount. They came with no instructions and the customer service is terrible.

These guys are the definition of organized chaos

Great watch

nice truck great work guys

I had this same year truck with a three on the tree!

the pickup looks great flashy

I like these modern shape truck's

Muy muy bonita quedó los felicito saludo desde Córdoba Argentina 💪🖒🏁

Awesome series!

"Tell me when I'm in far enough,tell me when you can feel it"

Oh my my my that is beautiful

Not sure what’s not to like about this!👍🏾

Many hands make light work! I need more friends

Big fan club of Thailand 🇹🇭🇹🇭🇹🇭

one of the beautiful pickups like

hand me the torque wrench: proceeds to hand him the impact drill

That is my dream truck good job u guys

Great job

Good looking truck

Nice job guys kelp em coming. Next time video the engine at start-up and let us hear it roar! Then do the drive off with us watching a burn out.

Cool build guys Nice C

Man you guys are badass👍

Love the Kobalt tools.

How much does it cost all these modifications?(engine,suspension,ac,etc)??

It's Sooo Cool to be Sarcastic in the build world Dude!!! 🤔

C10 top demais 🇧🇷🇧🇷👍👏👏

Felicitaciones ingenieros camioneta poderosa hermosa...

Love that truck !

Las 10 albercas más caras del mundo

Mannnnnnnn best 1 eva Nice wrk beautiful truck United Pacific & LEDs light Super strong ❤❤it

SAFETY NUMBER 1...LOL....

I really like the color of the truck.

Yeah I taught that C10 was perferct from the start, would love to roll around the corner in my neighbourhood in that

These trucks look better with a bench seat especially with a column shift

@rayjos0424

4 жыл бұрын

Yeah! I agree, that seat they took is beautiful. I'd love to have it for my truck.

hermosa camioneta felicitaciones

SUPER CHEVY TRUCK...PURE GM POWER

Great truck.

I love me a 65 C10 air suspension❤️

Father in law gave me a 71 short wide today. Starting the build tomorrow. It’s going to be really slow build. It’s not ran in 20+ years. But it was completely restored before he parked it lol. So I don’t know about the motor.

sick truck! Didn't see a single torque wrench.

How much $ for this build? Amazing. Is this show not on the app? Can’t find

THOSE GUYS ACT LIKE THEY ARE A BUNCH OF ROOKIES

♥️♥️♥️ Amazing

I'm an amateur mechanic. Calling you guys "amateur" is an insult to me and all others like me.

@user-ss2ly1ir6j

3 жыл бұрын

Why do these A-holes even exist???

I looked up videos on this truck because of a scene in the movie Groundhog Day.

You know what would be great, if you said how much all these parts cost!

Excelente trabajo, me encanta. Donde tienen el taller.?? Gracias.

Ok I watched one video and all ready like it it more than anything I've seen

Yeah I should b workn on my own c10 and cj5 I'll get them finished one day

Even hacks can get a TV show.

Transmission cooler... I like supplying the add on first, then routing through radiator cooler before return. Why? Two things. First, less heat put into coolant and second is cold weather: a little preheat helps hold moisture collection at bay in the transmission.

Very Nice 🙂

I have a 1973 IH Scout 4x4 you can build next...

he got the power stance going at 4:56

Oh great, go tear it up when you get it finished!

Watching this makes me want to spend all my money on my c/10

B E A Utiful. Nough said.

The sarcasm makes the video almost unbearable to watch.

Nice👏🏾👏🏾👏🏾

How are you controlling the torque converter lock?

Any idea what the paint code is for that grey?

you experts ever heard of lubricating bolts before torque. Dry threads will NOT torque.

The guy who's arguing about the pulley at 13:59 (and all over throughout the video) ruins it for me, would be great otherwise. I really want to enjoy these Week to Wicked videos but he kills the vibe every time.

@andress1044

4 жыл бұрын

yeap that guy think is better than everyone in there, he like to be the center of attencion, its annoying.....

@rezafied9150

4 жыл бұрын

So annoying.