2019 2020 2021 Silverado Sierra Denali Subwoofer Box How To DIY Tutorial Under Seat build
Автокөліктер мен көлік құралдары
This is part 1 of a multipl video series on installing a stereo system in your 2019 2020 2021 Chevy Silverado, GMC, sierra.
Stay tuned for more videos!
Пікірлер: 47
Thx for the tips.. I will see what I can do with my single 12 inch JL sub..
Nice built 🙊🙉🙈 I just learned a lot...
Ok you got my attention. Been looking for something like this for my 2021 Silverado custom. I'm a huge baashead. This'might be an alternative instead of taking the back seats out too wall off my back for subs. Haha. Like and subscribed
@leamangriffin
2 жыл бұрын
It gets down too! I used to have a wall with 4 15s in an 07 silverado back in the day!
Awesome thanks man I was curious if mdf would be a good option
Should’ve done the subs together in one chamber and then done the port. Now the subs have slightly different airspace so they will play slightly different which effects sound quality and spl
Nice man thanks for the help
I'm pushing a Hyundai Santa Cruz, it's a first gen so there's no aftermarket anything for it and I miss the boom boom from my truck that im definitely custom making a box with 4 8" subs, thanks for the info!
Nice work
You should custom build boxes like this and sell them. Looks good by the way
@loudelvis610
Жыл бұрын
Lol no...
How thick was the blade you were using to cut the wood
What tools would you say would All be needed ? Would like to get into doing this
Could I fit (2) 8” sub kicker comp r under seat box in a 2020 crewcab
So will 18.5 degrees work on a larger enclosure
hi, can you advise please, between this design with the front port or rear ports design , im using only 2 8", thank you !
Which subs hit harder, the skars or cts?
Do you still need the seat lift
How did you achieve your initial angle?
how many inches does it have in the front height?
Hi my name is Robert ,I’m trying to see if u can make a box for two 12 inch woofer for a 2010 Silverado crew cab with the port.
What is the specs of the box cubic feet? And tuning?
Have 2020 trail boss bout to do it to it.... 4 10"s that's gonna bass
@rosshermis7517
6 ай бұрын
Did you do it?
On the bottom you said one end was 14.75 and the other 14" , Is that a typo?
@Dmar-js5eu
2 жыл бұрын
I think that mesurment was a typo. 14.75 is bigger then the other side
@Smitup95
2 жыл бұрын
Yep just figured that out the hard way. Should have read every comment first. 🤦♂️
Is this with a 2.5 seat lift kit?
@leamangriffin
2 жыл бұрын
No seat lift at all!
how much to build one ???
How many sheet did u need to build it
@leamangriffin
2 жыл бұрын
1
Didn’t know youtube had dm’s.
Mystery stagger port technology.😂...still nice for DYI...but so many issu es
I dunno about that unequal lenght port. Probably messes up the tuning. Should have made 90 degree corners on them
@leamangriffin
2 жыл бұрын
Yeah i agree but at the time it was what i decided lol. Ive been debating a front side port and doing 2 much more powerful 8s.
@leamangriffin
2 жыл бұрын
The problem was i couldnt find a good balance between having enough port area for the subs requirements and getting the tuning where i wanted it. Definitely a sacrifice.
@ah4800
2 жыл бұрын
Go with 1 aero port on each side of the box firing into the doors
@F8TL_392
Жыл бұрын
In theory I’ve never made box before trying make one for mine but if not wanted a single could close the port on the longer side if speakers only going one side ? I’d like still have storage
That boxes life will be very short lived being made of particle board if you use decent subs.
@jmoore7362
Жыл бұрын
Mdf is not particle board bro
will not fit crewcab 2500,s for sure seats are lower.
Cameras in a video box
You used the wrong wood. Either use birch ply or mdf not particle
@912firefighter
Жыл бұрын
Umm, he did use MDF.......lol.......
@Tierone1337
Жыл бұрын
@@912firefighterhe used particle board idiot . Mdf is more dense than what he is using. It’s smoother with fine wood dust.
👍👍