I watched a video from a guy who got the limp code warning; his dealer wanted $3K for pump, injector, labor. He declined, pulled the injector, which was coated with what looked like uric acid crystals, cleaned it and job done for no actual cost.

I really appreciate your video. I was going from Arizona to Wisconsin when my check engine light came on and started the countdown to limp mode. I was able to quickly scan the code and do some google searches when this video came up. I watched it and it was the exact issue I had. I coasted into a ram dealership that had some parts. I fixed it right their parking lot on a Saturday for $350. The dealer was out there instantly trying to sell me a new truck. Thanks for the good video

@PetersonFarmsofNashvillePFON

6 ай бұрын

Wow you were lucky they had parts and impressive you were able to fix in the parking lot 👍great job Glad the video helped Happy Newyear !

I appreciate anyone willing to get in front of the camera to explain their issues - so thank you. My Ram just started this two days ago on the way to the airport. I did the mental calculation that I could make my flight and get home. Got home with 15 miles to spare. Now I'm looking for home remedies. Thanks again for the video.

@PetersonFarmsofNashvillePFON

2 жыл бұрын

Good luck ! Thanks for watching Phil PFON

Phil nice job on this video, I will definitely check this out. I will let you know the out come. Greatly appreciated! Thank you Sir!!

@PetersonFarmsofNashvillePFON

2 жыл бұрын

Hope it helps Please let me know Thanks for watching Phil PFON

Very well explained Phil.

@PetersonFarmsofNashvillePFON

2 жыл бұрын

Thanks for watching Just hoping it helps someone else out Phil PFON

Yikes ! Thank you Amigo for this important information, Greetings from Texas 🤠

@PetersonFarmsofNashvillePFON

Жыл бұрын

Thanks and welcome!

Thanks for the alldata tip!

@PetersonFarmsofNashvillePFON

Жыл бұрын

Your Welcome Thanks for watching

We have a 2013 Ram and it’s been one headache after another with that DEF system

@PetersonFarmsofNashvillePFON

2 жыл бұрын

Thanks for watching Yes the Def system is a bad idea

Love to all.. I just like to share what I did with my ..: keep you money on your pocket::: sounds crazy but check your wind shield fluid… that sensor it is connected somehow with the sensor of the DEF sensor on the tank my did it I was fixing to spend like 1200 on a new DEF pump.. just check on that.::

Emission’s has killed so many potentially good vehicles. Most every issue on newer diesels seems to be emission related and not the actual engine components. I hate you had so much trouble and expense, but it’s good to try and help others with what you’ve learned.

@PetersonFarmsofNashvillePFON

2 жыл бұрын

Thanks for watching Not much out there on KZread about it Just trying to help others out with my mistakes 😬😃🦎💰💰

@vernt4583

2 жыл бұрын

@@PetersonFarmsofNashvillePFON I got a p1c54 code from my ram and went to the dealership for them to run the code and there was a man there with a eco diesel 1500 With a catalytic converters stopped up and dealership wanted 4200$ for repair

@180Floridalife

Жыл бұрын

That’s why I have a deleted truck. Def is crazy and made to kill good engines

@darrylvaillancourt6144

Ай бұрын

A def hack you can bypass the computer on the transmission there's a sensor or solenoid run a ground wire and find a fused power wire you will need to add a resistor to the power wire I also have used a resistor on the low oil cutoffs just unplug the low oil cutoff and put a resistor in the plug

Do you remember the part number for the part you replaced?

Works 1500 ecodiesel too i have p2200 n p2209?

If someone sees this it is easy to diagnose. Just ohm out the line heater with your VOM meter. If it shows open, replace the wiring harness/ DEF supply fromt he pump to the DEF injector. The heater element went bad.

@danbettinger8584

4 ай бұрын

Can you explain the steps? Set my meter to ohms. Then what am I looking for?

My truck is actually doing the same thing as yours is right now. I know you used a 100watt resistor but do you know how many ohm’s the resistor is that needs to be used? Thanks

@PetersonFarmsofNashvillePFON

2 жыл бұрын

2.2 ohms

Thanks for the great info. How many miles on your ram I have a 2018 as well.

@PetersonFarmsofNashvillePFON

2 жыл бұрын

Thanks for watching I’m at 127k right now Love the Truck Hate the Def Phil PFON

@luciohernandez8758

2 жыл бұрын

Mine just went out at 93 thousand miles smh

@darrylvaillancourt6144

Ай бұрын

A def hack you can bypass the computer on the transmission there's a sensor or solenoid run a ground wire and find a fused power wire you will need to add a resistor to the power wire I also have used a resistor on the low oil cutoffs just unplug the low oil cutoff and put a resistor in the plug

You said you bought the harness and tube/heater at the dealership. What is it called?

@PetersonFarmsofNashvillePFON

7 ай бұрын

Diesel exhaust fluid supply hose Goes from pump to def injector

i just bought a 2018 dodge ram eco diesel last week and would like to get a good all round obd scanner for my truck so i can possibly keep a check on it myself ///and possibly add an extra key or two myself /////any advive ???/ without spending too much ///thanks

@PetersonFarmsofNashvillePFON

2 жыл бұрын

Congratulations on your new Ram ! Nothing cheap about a scan tool for what your asking to do. I work in Automotive manufacturing and what your wanting to do takes some special software Let me know if you find something Thanks for watching and sharing Phil

@garrieparsons2265

2 жыл бұрын

@@PetersonFarmsofNashvillePFON yes the Autel scan tool does program keys at anything from a thousand to $1500 I’m sure must be a cheaper machine.. I’m still looking lol . Thanks for your reply anyway 👍

@darrylvaillancourt6144

Ай бұрын

A def hack you can bypass the computer on the transmission there's a sensor or solenoid run a ground wire and find a fused power wire you will need to add a resistor to the power wire I also have used a resistor on the low oil cutoffs just unplug the low oil cutoff and put a resistor in the plug

Well if this is a recurring problem, I have it to ya you can fix it , but it's going to happen again, frankly. I should not have to do anything, this should not happen and I should not pay for it dodge, we need to get together and sued dodge... this is bulshit

@PetersonFarmsofNashvillePFON

Жыл бұрын

It’s just not Ram and I agree with ya 👍

Hi Phil. Could you please explain the resistor procedure to me, my truck went into limp mode and I would like to verify if I'm on the same boat that you were with this repair. I've never attempted this type of procedure, so I would greatly appreciate the play-by-play. Also, I've read that some people had to resort to using a 3 ohm resistor because the 2.2 wouldn't work, any thoughts? I greatly appreciate any help.

@PetersonFarmsofNashvillePFON

Жыл бұрын

I would think 3 ohm would be fine just to confirm it’s a break in the wire going from pump to injector A simple lite meter would show that as well With the resistor in place you would be able to start vehicle out of limp mode but your def line would freeze up in the winter and you will have a lot of other codes I would buy the injector line 1st and replace Simple and far the least expensive repair Good luck

@brutaldevourment666

Жыл бұрын

@@PetersonFarmsofNashvillePFON Thank you for the clarification. Well I live in South Texas, so thankfully I don't have to worry about def freezing. I feel like the resistor method is going to provide me both with the additional troubleshooting that I need and also the ability to get my truck moving in the meantime, while I get everything squared away. I really appreciate your insight.

@brutaldevourment666

Жыл бұрын

@@PetersonFarmsofNashvillePFON Sorry, a couple of last questions, could you please send me some links of the items you used to make the resistor bypass? Or at least what they are called so that I can search for them? (Resistor, wiring, the pins you used to insert into the connector, etc). Do I have to solder, or will electrical tape or glue suffice? Thank you in advance

@darrylvaillancourt6144

Ай бұрын

A def hack you can bypass the computer on the transmission there's a sensor or solenoid run a ground wire and find a fused power wire you will need to add a resistor to the power wire I also have used a resistor on the low oil cutoffs just unplug the low oil cutoff and put a resistor in the plug

If we just delete it, would it fix that problem?

@PetersonFarmsofNashvillePFON

2 жыл бұрын

Yes if you could find someone to do the tuning Good Luck

Nothing a tune and delete won’t fix……happiest day of my truckin life was getting my 19 deleted….purrs like a kitten

@PetersonFarmsofNashvillePFON

Жыл бұрын

Mine also now 😁👍

@razomike

11 ай бұрын

Must be nice… unfortunately living in California. CalEPA and CHP are the worst

I think it’s time that the EPA and manufacturers start paying for repairs and down time. How can a system that freezes at -12C be approved for use in NA. My truck has been down 3 times because of the DEF system. One frozen tank that poorly designed heater wouldn’t thaw, one def heater failure and most recently the Def pump. Truck sat for 6 weeks while waiting for the heater. Can’t believe there hasn’t been a recall or permanent warranty slapped on the these poorly designed systems. I would love to have one of the design engineers sit on the side of the road at -36C with the system froze solid.

@PetersonFarmsofNashvillePFON

Жыл бұрын

I agree with ya Government Juice (DEF) is such a scam and I would have had my truck Tuned off of it if I could have found someone to do it ! Thanks for watching and good luck with yours

What size resistor? I know 100w. What ohms????

@PetersonFarmsofNashvillePFON

2 жыл бұрын

2.2ohms

The warranty doesn't cover that???

@PetersonFarmsofNashvillePFON

2 жыл бұрын

Warranty ran out due to mileage Thanks for watching Phil

im not sure if ive seen people clean the injector to fix this problem

@PetersonFarmsofNashvillePFON

2 жыл бұрын

The Def can crystallize Warm water cleans it off surface There are other videos showing that but Seems to me if it does that and comes back again then there are other problems Still learning DE systems my self Thanks for watching Phil

Your injector is going to clog up too.

@PetersonFarmsofNashvillePFON

Жыл бұрын

It did

Kill the rooster

This is bull crap that you have to do this on a 60,000 to 80,000 piece of crap!!!!

Or just delete it ;)

@PetersonFarmsofNashvillePFON

2 ай бұрын

Done 👍

@darrylvaillancourt6144

Ай бұрын

A def hack you can bypass the computer on the transmission there's a sensor or solenoid run a ground wire and find a fused power wire you will need to add a resistor to the power wire I also have used a resistor on the low oil cutoffs just unplug the low oil cutoff and put a resistor in the plug

5 minutes worth of information in a 24 minute video. points and gratitude for effort, but a very poor presentation.

@PetersonFarmsofNashvillePFON

2 жыл бұрын

Thanks for watching and your feedback 👍 Phil

@justintuttle137

Жыл бұрын

FO bob the welder

@darrylvaillancourt6144

Ай бұрын

A def hack you can bypass the computer on the transmission there's a sensor or solenoid run a ground wire and find a fused power wire you will need to add a resistor to the power wire I also have used a resistor on the low oil cutoffs just unplug the low oil cutoff and put a resistor in the plug